Shop
Yokogawa DL950 ScopeCorder
- 200 MS/s high-speed sample rate
- 8 G points large memory
- Long recording to internal flash memory at 20 MS/s
- 10 Gbps Ethernet high-speed data transfer
- Up to 16-bit analog resolution
- Isolated input of up to 1000V
- Multi-unit synchronization of up to 160 channels
- 8 input module slots and variety of isolated plug-in modules
- 12.1-inch large touch screen
Yokogawa DL350 Portable ScopeCorder
- 2 input module slots
- Up to 8 channels analog inputs
- 20 different input modules
- Up to 100 MS/s sampling rate
- Up to 16-bit analog resolution
- Resistive touchscreen
- Battery Powered for 3.5 hours
- A4-sized compact chassis
Yokogawa GM10 Series – Data Acquisition System
- Up to 10 input module slots
- Enables PID and program control
- Up to 420 channels per system
- Web-based configuration
- Bluetooth and mobile connectivity
- Secure data storage
- Electromagnetic relay module
- Multiple GM10 systems can be linked together using Yokogawa’s GA10 software
- Up to 100 units and up to 2000 channels
Yokogawa GP10/GP20 – Paperless Recorders
- 5.7/12.1″ touchscreen display
- Expansion unit available to expand input channels of up to 450
- Custom display function
- Support EtherNet/IP
- Option for connection with WT power meters
- Support for FDA 21 CFR Part 11 for food & drug industry
- Front panel door with white series
Rigol M300 System Series – Data Acquisition Mainframe
- Up to 320 switch channels per mainframe
- Integrated DMM scanning of up to 256 channels
- Interval scanning with storage of up to 100,000 readings
Accuenergy AcuLink 810 – Data Acquisition Server & Gateway
- Ethernet gateway for Modbus RS485 and digital output devices
- Access energy information remotely via web server, or push to IP-based master devices or software
- Data acquisition and logging with 8GB on-board memory
- Embedded webserver for real-time data and easy configurations
- Controller/Master system can poll data from all RTU devices via Modbus-TCP/IP Protocol
- Dual ethernet RJ45 port and WiFi communication channels
- Enhanced cyber security for critical infrastructure deployment
- Compact DIN rail mount design
- Track energy usage and peak demand
- Quick and simple software-free setup
Accuenergy AcuMesh – Wireless RS485 Network
- Available in both 900MHz and 868MHz frequency
- Automatic connection without any configuration or software
- Compatible with any protocols: Wireless Modbus RTU, Profibus, DNP 3.0 and more
- Highly secure 128-bit Advanced Encryption Standard (AES)
- Advanced configuration available for complex network setup with free software
- 1000 ft (305m) indoor / 4 Miles (6.5km) outdoor in a single hop
- Each transceiver acts as an extension point for the network allowing for a longer range of communication
- Point to multi-point communication enabled with mesh structure
- Self-healing and optimizing communication pathway
Accuenergy AXM-WEB2 – Communication Module
- Daisy-chain Ethernet ports (RSTP Protocol)
- Support for WiFI WPA, WPA2 Enterprise security protocol
- Remote meter access via SerialNumber.accuenergy.io
- Dual Ethernet RJ45 port with individual network configuration
- Dual Ethernet ports and WiFi works simultaneously with different networks and data acquisition systems
- COMtrade format for waveform capture
- 8GB onboard memory with 1-second interval datalogging capabilities
- Industry leading 100ms and 40ms response rate via Modbus-TCP/IP protocol
- Secure HTTPS data encryption to cloud server
- SSL encrypted webserver plus TLS 1.2 compliance for industry-leading cybersecurity standard
- Metering data backup log to avoid data loss during network downtime
- Support industrial, utility and substation protocols IEC 61850, DNP 3.0 V2, Modbus-TCP/IP, SNMP, HTTP/HTTPs Post, FTP & SNTP
- Built-in sFTP server for data-log storage and retrieval.
- Web accessible graphical display of historical data trends for all parameters for analysis
- WiFi supports Access Point mode and Station mode for both direct connection/configuration and public WiFi network connection
Accuenergy AXM-WEB2 FOLC- Communication Module
- Daisy-chain Ethernet ports (RSTP Protocol)
- Fiber Optics LC Connector
- 802.3u Fast Ethernet 100Base-FX compatible
- Multimode Cable diameter 62.5/125 μm and 50/125 μm
- Maximum segment length of 2,000m
- 1310nm wavelength reduces signal loss and absorption
- Ethernet Port and WiFi channel
- Up to 2,000 meter distance from your meter to hub/switch
Accuenergy DC Current Shunts
- 0.5% accuracy
- 50A to 6000A measurement range
- 75mV rated voltage output
Accuenergy EV300 Series – Economy Multifunction Power Meter
- Utility Revenue Grade Accuracy IEC 62053-22 0.5s Class / ANSI C12.20 0.5 Class
- Bi-directional Energy Metering
- Utility Revenue Grade Accuracy
- Field Configurable 5A/1A CT Input
- RS485 port Built-in with Modbus-RTU
- Standard Panel Mount 96mm DIN- Direct Retrofit
- Switch Status Monitoring and Controlling
- Energy Pulse Output
- 4-20mA Analog Transducer Output
- Over/Under Limit Alarm-triggered Relay Output
- Lowest Cost in the Same Class Guaranteed
Accuenergy HAB 16555 – DC Current Sensors
- Measures DC current up to 5,000A
- High accuracy 1%
- Optimal output signal at either 4-20mA or 0-5V
- Non-invasive design ideal for use in existing installations
- Optional Bidirectional current input
- Certified CE and RoHS compliant
Accuenergy HAK – Hall Effect Current Sensors
- Measures DC current up to 1000A
- High accuracy 1%
- Optimal output signal at either 4-20mA or 0-5V
- Non-invasive design ideal for use in existing installations
- Optional Bidirectional current input
- Certified CE and RoHS compliant
Accuenergy Rogowski Integrator Kit – 5A
- 0-5A rated output that works with any power meter or equipment with 5A nominal current transformer input
- Individual CT ratios can be configured for each channel. Works in any single-phase application with different current ratings
- Works in both 50Hz and 60Hz systems
Accuenergy Rogowski Integrator Kit – mA
- 4-20mA or 0-20mA rated output that works with any analog input controller
- Current sensing range from 2.5A to 50,000A to fit all systems
- Designed to easily fit into panels or busbars where space may be limited
Accuenergy Rogowski Integrator Kit – mV
- 0-333mV rated output that works with any power meter or equipment with 333mV nominal current transformer input
- CT ratios: 500A, 1kA, 2.5kA, 5kA, 10kA, 25kA, 50kA
- Individual CT ratios can be configured for each channel
Accuenergy Rogowski Integrator Kit – V
- 0-5Vdc or 0-10Vdc rated output that works with any energy meter or device
- Measurement Channels: Three-phase or single-phase
- Works in both 50Hz and 60Hz systems
Rigol DHO800 Series – Compact High Performance Digital Oscilloscopes
- 70-100 MHz Bandwidth
- 2-4 Analog Channels
- 1.25 GSa/s Real-time Sample Rate
- 25 Mpts Memory Depth
- 12 bit Vertical Resolution
Monarch Nova-Strobe Stroboscope
The Monarch Nova‐Strobe LED family of rugged industrial stroboscopes provide an extremely bright, uniform light output for performing stop motion diagnostic inspection and RPM measurements. The twelve LED light source is extremely efficient which means long battery life and continuous cool operation. A wide operating range of 30‐500,000 flashes per minute covers all applications.
Monarch Nova-Pro Stroboscope/Tachometer
The Nova-Pro™ is a series of powerful portable visual inspection and speed measurement tools. We have combined all the features of our hand held LED stroboscopes together with a full function laser tachometer to create a compact, ergonomic and extremely powerful two in one predictive maintenance tool. The stroboscope light source is made up of twelve LED’s which are extraordinarily bright yet extremely efficient allowing cool continuous operation and long lasting rechargeable battery. Continuous operation is also possible with the optional AC adapter.
ITECH IT8600 Series – AC/DC Electronic Loads
IT8600 is ITECH latest series of AC/DC electronic loads with power range 0~14.4 kVA and adjustable frequency 45 Hz ~ 450 Hz. The unique oscilloscope waveform display function of IT8600’s can display input voltage & current as waveform. It is equipped with measurement modes for different parameters such as inrush current, peak value, effective value, PF (power factor). Voltage harmonics measurement capacity is up to 50th. The built-in GPIB, LAN and USB communication interfaces are for reliable and fast control. IT8600 is the perfect solution for testing UPS, inverters, AC power supplies and relevant AC electronic components etc.
Rigol DL3000 Series – Precision DC Electronic Loads
- Up to 350 W, 150 V, and 60 A
- Up to 5 A/us Slew Rate
- Up to 30 kHz Dynamic Frequency
ITECH IT6000B Series – Regenerative Power System
IT6000B integrates bidirectional power supply and regenerative electronic load into one 3U unit. It is also a very powerful one. Only a button is needed to switch between the bidirectional power supply and the regenerative electronic load. It can be used not only as a stand-alone powerful bidirectional power supply, as a source to provide power; but also as an independent regenerative electronic load, to absorb the consumed energy and feedback cleanly to the grid. IT6000B offers standard two-quadrants functionality. IT6000B provides 7 voltage ranges, up to 2250V, supports master-slave parallel with even current distribution up to 1152kW. Built-in waveform generator supports generating arbitrary waveforms, and imports LIST files for waveforms via USB interface. IT6000B is the combination of reliability, high efficient setting, safe and multiple measurement functions. IT6000B is a family of bi-directional, regenerative power system with excellent performance, extensively used in aspects of high power battery, automotive electronics, green energy, high speed testing etc.
ITECH IT6000C Series – Bidirectional Programmable DC Power Supplies
The bidirectional programmable DC power supply of IT6000C series combines two devices in one: a power supply (source) and an electronic load (sink) with energy recovery. Based on these two functions, IT6000C bidirectional DC power supply offers the functionality of two-quadrant operation. The regenerative capability enables the energy consumed to be put back onto the grid cleanly, saving costs from energy consumption and cooling, while not interfering with the grid.
ITECH IT7800 Series – High Power Programmable AC/DC Power Supply
ITECH IT7800 is a programmable AC/DC power supply, with power up to 15kVA, voltage ranges up to 350V L-N and 500V L-N. Users are able to increase output power up to 960kVA by configuring master-slave parallel. Intuitive LCD touch panel interface allow users to quickly become familiar with unit operation.
IT7800 series has a built-in power meter and arbitrary waveform generator which is able to simulate harmonics and other arbitrary waveform output. Users can choose single phase, three-phase, phase reversal, and multi-channel 4 output modes, with programmable output, and complete measurements.
ITECH IT-M3300 Series – Regenerative DC Electronic Loads
IT-M3300 regenerative DC electronic load can not only simulate various load characteristics, but can also feed back electrical energy to the local grid instead of heat. With high power density design, it can provide up to 800W power absorption with its tiny body of only 1U half-rack. Its flexible modular architecture design can meet the test requirements of customers with different current and power. At the same time, it has high-precision output and measurement, and has made a number of safety designs for testing. It is suitable for test applications such as various types of battery discharge, multi-channel power supply, and semiconductor aging.
ITECH IT-M3800 Series – Regenerative DC Electronic Load
IT-M3800 series regenerative DC electronic load can not only perform as a DC load, but also feed power back to the grid, which saves electricity and cooling costs for you. It can complete high-precision output and measurement, and supports multiple protection functions. It is well applied to the test of 5G communication and data center, industrial components test, aging test, PV and energy storage test, power optimizer and other fields.
ITECH IT-M3200 Series – High Precision Programmable DC Power Supply
IT-M3200 high precision programmable DC power supply adopts a mixed modes design, which not only takes into account high power and low ripple output, but also has dynamic load response, switching between multiple current measurement ranges. It meets various current measurement requirements from ampere level to micro-ampere level. The IT-M3200 high precision power supply has a flexible modular architecture, independent multi-channel design with synchronous operation function. Users can configure each channel arbitrarily according to the test requirements of the DUT. The maximum channels is up to 16 which can meet various customized test requirements. It is widely used in the test fields of 3C products, semiconductor devices, 5G, IoT and medical electronic equipment, etc.
ITECH IT-M3600 Series – Regenerative Power System
IT-M3600 regenerative power system integrates two instruments in one, which is a bidirectional power supply and a regenerative electronic load. When used as a load, its energy recovery function can convert the absorbed DC power into AC power and return it to the grid. When used as a power supply, it can also be used as a wide range bidirectional DC power supply. IT-M3600 combines the advantages of both instruments well, and its small size of only 1U half rack also help to save your space, time and cost. IT-M3600 with high-precision output and measurement, it is suitable for multiple test fields such as multi-module batteries, multi-channel power supplies, micro inverters, and semiconductor devices.
ITECH IT-M3900B Series – Regenerative Power System
IT-M3900B regenerative power system features two units-in-one: a bidirectional DC power supply, and an independent regenerative DC electronic load. One-button-switch between source and load mode, a unique and decisive feature for the users that work in different applications such as battery, PV energy storage, electric vehicle, Green energy and some ATE fields.
ITECH IT-M3900C Series – Bidirectional Programmable DC Power Supply
IT-M3900C is a regenerative bidirectional programmable DC power supply, it is not only a stand-alone bidirectional DC power supply but also can be used as a regenerative electronic load, to absorb the consumed energy and feedback cleanly to the grid. The high-efficiency energy feedback not only saves electricity consumption and heat dissipation costs but also does not interfere with the operation of the power grid. IT-M3900C provides high accuracy output measurement, high reliability, high safety, and abundant measurement functions. Which makes IT-M3900 meet customers’ high accuracy automatic ATE testing requirements, while extensively used in aspects of automotive electronics, new energy vehicles, photovoltaic energy storage, intelligent industrial equipment, battery simulation, etc.
ITECH IT-M3900D Series – High Power DC Power Supply
The IT-M3900D series is a single channel output programmable DC power supply with a compact design to save rack space. The wide range of output design can provide a wider range of voltage and current combinations within the specified power range. One unit can be used as multiple power supplies, providing more flexibility. The CC/CV priority allows users to switch the output mode according to the different needs of the DUT priority, matched with the high-precision and high-speed product characteristics, and a variety of standard communication interfaces, simplifies and speeds up the test development. Thus, meeting the users’ variety of testing applications, widely used in laboratories, production lines, and automatic test systems.
ITECH IT-M3400 Series – Bidirectional DC Power Supplies
IT-M3400 bidirectional DC power supply integrates the features of a bidirectional DC power supply and a regenerative electronic load. It keeps the advantages of high power density and modular architecture design of M series. It can meet the customer’s test requirement of different current and power level. Thanks to the independent multi-channel design, users can configure each channel according to the quantity and specifications of the DUT. At the same time, it has high-precision output and measurement, and has made a number of safety designs for testing, suitable for multiple test fields, such as power modules, intelligent industrial equipment, automotive electronics, charging and discharging tests of various small capacity batteries.
ITECH IT8000 Series – Regenerative DC Electronic Loads
IT8000 series is a family of high power regenerative electronic loads with compact size. The highly integrated capability enables the e-load to simulate various e-load characteristics, and return the consumed energy back to the grid cleanly, saving costs related to energy consumption and cooling, meanwhile eco-friendly. With modular high power density design, IT8000 provide up to 18kW in 3U space. The power is expandable up to 1152kW by master-slave paralleling and active current sharing. If you move into application of high power UPS, storage battery, PV battery, EV, energy storage system, ITECH can help you with IT8000 series high power regenerative electronic load.
ITECH IT8200 Series – Regenerative AC/DC Electronic Loads
IT8200 Series is a regenerative programmable AC/DC electronic load. It is power regenerative, which not only saves electricity and cooling costs for you, but is also good for saving energy and environmental protection. AC load mode supports both rectification and non-rectification, providing CC/CR/CP/CS/CC+CR/CE operating modes. It can simulate multiple circuit topologies under CE mode such as single-phase rectification RLC Circuit and parallel RLC Circuit. IT8200 can be used in the testing of V2G, EVSE, PCS, UPS, inverter, etc. IT8200 Series utilizes a high power density design, and the power can reach 6kVA in a 2U unit and 15kVA in a 3U unit. After parallel connection, the power can be extended to 960kVA at most. Its LCD touch screen with graphical UI interface can directly define different waveforms. Combined with arbitrary waveform editing function and perfect protection function, it is an ideal choice for R&D testing and system construction.
ITECH IT8400 Series – High Performance DC Electronic Load
IT8400 high-performance DC electronic load has two voltage levels, 600V and 1200V. It supports master-slave connection in parallel with power from 6 kW to 600 kW, and is capable of fast double power loading. It has three current readback ranges with a resolution of up to 40uA. IT8400 has faster loop response and current rising and falling speed. It supports up to 8 working modes. It also has dynamic mode, List, OCP, OPP test, automatic test and battery test functions. IT8400 has built-in CAN, LAN, GPIB, USB, RS232 and analog interfaces, suitable for remote control and system building. In addition, the full protection function makes it well matched with the test of fuel cell, power battery discharge, DC charging pile, BOC, power electronics, solar, automotive high-voltage components, DC-DC, motor and other similar applications.
Rigol DP2000 Series – High Performance Linear DC Power Supplies
- Total Power: 222 Watts
- 3 channels
- Max Voltage: 64 Volts
- Max Current: 10 Amps
Rigol DP800 Series – High Performance Linear DC Power Supplies
- 140 to 200 Watt
- 1 to 3 channel models available
- Low Ripple Noise <350 uVrms/2mVpp
Rigol DP900 Series – High Performance Linear DC Power Supplies
- Total Power: 210 Watts
- 3 channels
- Max Voltage: 64 Volts
- Max Current: 6 Amps
Neureus Technologies RPSu High Precision Power Supply
The RPSu High Precision Power Supplies can deliver high current output up to 300A of maximum current and 60V of maximum voltage at 12Kw of maximum power with a long term stability of 2ppm. The RPSu is best suited for scientific and industrial applications such as particle accelerator magnets supply, medical imaging and treatment systems, and semiconductor processing.
ITECH IT7600 Series – High Performance Programmable AC Power Supplies
ITECH’s IT7600 series high performance programmable AC power supplies, adopt advanced digital signal processing technology, with frequency up to 10-5000 Hz, built-in power meter and large-screen oscilloscope function. Power up to 54 kVA and support master-slave parallel, which can provide high-capacity single-phase or three-phase AC output. The IT7600 has built-in arbitrary waveform generator to simulate a variety of waveforms; as well as strong measurement and analysis functions.
Preen AFV/APF Series – AC Power Sources
- Single phase output power from 0.5-20kVA and three phase output power from 10-2000kVA.
- CE mark with high electromagnetic compatibility performance.
- Programming Sequence Function: STEP and GRADUAL modes allow users to easily set sequences of start/ end voltage, frequency and run time for testing purposes.
ITECH IT7900 Series – Regenerative Grid Simulator
The IT7900 series is a programmable, four-quadrant grid simulator. It is also a four-quadrant power amplifier, which can be used to test various grid-connected equipment. For example, PCS, energy storage system, microgrid, BOBC (V2X), PHiL, etc. With the islanding mode (RLC settable), a single unit of IT7900 can realize the anti-islanding protection test. The power density of IT7900 series is very high, 15kVA in 3U. After parallel connection, the power can be extended up to 960kVA.
ITECH IT7900P Series – High Performance Regenerative Grid Simulator
The IT7900P series high-performance regenerative grid simulator provides an all-in-one test solution that can be used not only as a grid simulator and four-quadrant power amplifier, but also as a four-quadrant regenerative AC/DC electronic load. The full four-quadrant operation, regenerative ability can feedback power to the grid, meet the needs of environmental protection, but also saves a lot of electricity and heat dissipation costs. Compact, modular and efficient structure design allows the IT7900P up to 15kVA in 3U single unit, and its power can be extended to 960kVA after master-slave parallel connection. Colorful touch screen with intuitive GUI allows IT7900P to directly define different waveforms. The rich operation modes can meet the test requirement of single-phase, three-phase, inverse-phase and multi-channel. It provides high flexibility for testing and can be widely used in many fields such as PV, ESS and EV.
ITECH IT-M7700 Series – High Performance Programmable AC Power Supplies
ITECH IT-M7700 High Performance Programmable AC Power Supply combines intelligence and flexibility, breaks through the huge defects of the traditional AC power source, reduces the size to only 1⁄2 1U, maximizes space utilization. Built-in power meter and arbitrary waveform generator make it convenient to simulate various arbitrary waveform outputs. IT-M7700 is designed with advanced technologies of programmable AC and DC power supplies, and can be widely used in multiple fields such as power energy products, home appliances, industrial electronics, and IEC standards testing.
ITECH IT6500 Series – Wide-Range High-Power DC Power Supplies
With ITECH’s latest technology, the IT6500 series offers a full-featured high-performance power test solution. With fast response these DC power supplies provide users with a new level of power supply performance. From 800W to 30 kW, the whole series include more than 100 models. The maximum output voltage and current is up to 1000V and 1200A respectively. With its autoranging capability, it also has a super wide range of voltage and current applications. Users can choose the power supply that fits their testing requirements perfectly. IT6500C series power supplies provide built-in DIN40839 and ISO-16750-2 testing curves, support solar panel I-V curve simulation function.
APM SP-300 Series – Single Phase AC Power Supply
APM’s SP-300 Series AC Source is a single phase, multifunctional power supply able to output DC, AC and DC+AC, as well as measure electrical parameters precisely. The touch screen allows for complete, easy operation from the front of the unit, and USB data import/export. It is able to analog output normal or abnormal power input for electrical device testing. The SP Series features high speed DSP+CPLD control, high frequency PWM technology, active PFC design, and up to an 85% conversion efficiency.
- Power: 600-5000 W
- Voltage: 150-300 V
- Current: 2.8-46 A
APM SPS-300 Series – Three Phase AC Power Supply
APM’s SPS-300 Series AC Source is a 3-phase programmable AC power supply with high power density. Featuring high speed DSP+CPLD control, high frequency PWM technology, and active PFC design, the SPS-300 series is able to provide stable DC/AC output power, as well as 3-phase/1-phase output power. The touch screen allows for complete, easy operation from the front of the unit. The SPS-300 Series is applicable in multiple testing applications including electrical, lighting, and aviation.
- Power: 1200-20000 W
- Voltage: 300 V
- Current: 5.04-165.6 A
