Showing 1–10 of 923 results

Electro-Meters Rudder Angle Indicator – Analog Meters

Navigate the high seas with confidence using our Rudder Angle Indicators. These displays offer a 250-degree meter movement, 12/24 Volt illumination, and customizable branding options. With 2% accuracy, vibration resistance, and durability in harsh environments, the RAI series ensures your vessel’s rudder position is always at your fingertips.

GE / ITI PCL Series – AC Current Transducer

  • Input: Up to 75 AAC
  • Output: 4-20 mADC
  • Frequency: 50-60 Hz
  • Insulation Level: 600 V, 10 kV BIL full wave

GE / ITI PCM Series – AC Current Transducer

  • Input: Up to 300 AAC
  • Output: 4-20 mADC
  • Frequency: 50-400 Hz
  • Insulation Level: 600 V, 10 kV BIL full wave

ITECH IT-M3410 Series – Programmable DC Power Supply

The IT-M3140 Programmable DC Power Supply is a compact 2U half rack solution designed for testing, production, R&D labs, and ATE integration. With power output of up to 1850W and 3000W, and voltage range from 30V to 1200V, it caters to a wide range of testing requirements while saving on equipment costs. It offers constant voltage, constant current, and constant power modes, with automatic wide-range output for enhanced flexibility.

The IT-M3140 combines stability, fast response times (<1ms), comprehensive protection functions, and LIST programmable capabilities. It features a standard USB/LAN interface for easy integration with ITECH’s PV3140 software, enabling remote control and data storage. Widely applicable in semiconductor device ATE, burn-in integration, testing and certification, power module development, and automotive electronics, the IT-M3140 is a versatile and efficient power supply solution.

  • Voltage:30V-1200 V
  • Current:5A-150 A
  • Power:1850W-3000 W

ITECH IT-N2100 Series – Solar Array Simulator

The IT-N2100 series solar array simulator is an advanced DC power supply designed for exceptional performance, featuring rapid IV curve adjustment capabilities. This cutting-edge device is capable of accurately replicating the IV output characteristics exhibited by a wide range of solar panels across diverse environmental conditions, including temperature variations, light intensity fluctuations, shadow decay, and aging effects. Its versatility extends to various applications, such as solar micro-inverter and power optimizer testing, satellite power system evaluation, sail power array assessments, and more. The IT-N2100 boasts remarkable attributes such as minimal ripple and noise, as well as swift maximum power point tracking (MPPT). Additionally, it supports multi-channel synchronous control and high voltage topology, ensuring seamless integration and precise control over multiple channels of solar panel simulation.

ITECH IT-N6900 Series – Programmable DC Power Supply

IT-N6900 DC power supply has 60V and 150V, 850W and 1500W output. It features as black panel and HD screen, low ripple and noise. It can provide stable and pure DC power, two current ranges, up to 1μA current resolution. It has CC and CV priority settings, new Foldback protection. IT-N6900 series supports SCPI and LabVIEW drivers, built-in USB/LAN/digital IO communication interface, optional GPIB/RS232/analog IO, suitable for remote control and system integration, and can be used in R&D, production lines, univeristies, etc.

ITECH IT2800 Series – Graphical Source Measure Unit

The IT2800 Series are compact and cost-effective bench-top Source Measure Units (SMUs) with the capability to source and measure both voltage and current. The IT2800 Series combine the capabilities of a voltage source, a current source, a voltage meter, a current meter and an ohmmeter (along with the capability to switch easily between these various functions). With a current range of 10fA to 10A and a voltage range of 100nV to 1000V, the IT2800 series SMU has capabilities that allow it to perform more than just simple DC and pulsed measurements to prevent errors in measurement results due to the device’s own heating.

Siglent SDG1000X – Arbitrary Waveform Generator

  • Dual-channel design with bandwidth up to 60 MHz and amplitude up to 20 Vpp
  • 150 MSa/s sampling rate, 14-bit vertical resolution, and 16 kpts waveform length
  • Innovative EasyPulse technology reduces jitter in Pulse waveforms, offering wide range and extremely high precision in pulse width and rise/fall times adjustment
  • Innovative TrueArb technology supports user-defined waveforms from 2 to 16 kpts and user-defined sample rate from 1 μSa/s to 30 MSa/s

Siglent SDG2000X – Arbitrary Waveform Generator

  • Dual-channel design with a maximum bandwidth of 120 MHz
  • Achieves a maximum output amplitude of 20 Vpp, ensuring high fidelity output with an 80 dB dynamic range
  • Features a high-performance sampling system with a 1.2 GSa/s sampling rate and 16-bit vertical resolution, preserving waveform details
  • Innovative TrueArb technology supports user-defined waveforms from 8 to 8 Mpts and user-defined sample rates from 1 μSa/s to 75 MSa/s
  • Equipped with a large Touch Screen Display for convenient operation
  • Enables easy combination of waveforms through a single output, including noise and arbitrary waveforms

Siglent SDG6000X – Arbitrary Waveform Generator

  • Dual-Channel design with a maximum bandwidth of 500 MHz
  • Achieves a maximum output amplitude of 20 Vpp, ensuring high fidelity output with an 80 dB dynamic range
  • Features a high-performance sampling system with a sampling rate of 2.4 GSa/s and 16-bit vertical resolution
  • Incorporates EasyPulse circuitry to reduce jitter and enhance pulsed performance
  • Optional capability to generate baseband and IF IQ modulated waveforms