A DC power supply converts alternating current (AC) to a regulated and steady direct current (DC) output, providing reliable and efficient power for electronic devices. Widely used in various applications, from electronics manufacturing to research laboratories, these power supplies offer precise voltage control and high reliability. With their stability and consistent performance, DC power supplies are essential for powering a wide range of electronic equipment.

Showing 1–10 of 35 results

ITECH IT-M3410 Series – Programmable DC Power Supply

The IT-M3140 Programmable DC Power Supply is a compact 2U half rack solution designed for testing, production, R&D labs, and ATE integration. With power output of up to 1850W and 3000W, and voltage range from 30V to 1200V, it caters to a wide range of testing requirements while saving on equipment costs. It offers constant voltage, constant current, and constant power modes, with automatic wide-range output for enhanced flexibility.

The IT-M3140 combines stability, fast response times (<1ms), comprehensive protection functions, and LIST programmable capabilities. It features a standard USB/LAN interface for easy integration with ITECH’s PV3140 software, enabling remote control and data storage. Widely applicable in semiconductor device ATE, burn-in integration, testing and certification, power module development, and automotive electronics, the IT-M3140 is a versatile and efficient power supply solution.

  • Voltage:30V-1200 V
  • Current:5A-150 A
  • Power:1850W-3000 W

ITECH IT-N2100 Series – Solar Array Simulator

The IT-N2100 series solar array simulator is an advanced DC power supply designed for exceptional performance, featuring rapid IV curve adjustment capabilities. This cutting-edge device is capable of accurately replicating the IV output characteristics exhibited by a wide range of solar panels across diverse environmental conditions, including temperature variations, light intensity fluctuations, shadow decay, and aging effects. Its versatility extends to various applications, such as solar micro-inverter and power optimizer testing, satellite power system evaluation, sail power array assessments, and more. The IT-N2100 boasts remarkable attributes such as minimal ripple and noise, as well as swift maximum power point tracking (MPPT). Additionally, it supports multi-channel synchronous control and high voltage topology, ensuring seamless integration and precise control over multiple channels of solar panel simulation.

ITECH IT-N6900 Series – Programmable DC Power Supply

IT-N6900 DC power supply has 60V and 150V, 850W and 1500W output. It features as black panel and HD screen, low ripple and noise. It can provide stable and pure DC power, two current ranges, up to 1μA current resolution. It has CC and CV priority settings, new Foldback protection. IT-N6900 series supports SCPI and LabVIEW drivers, built-in USB/LAN/digital IO communication interface, optional GPIB/RS232/analog IO, suitable for remote control and system integration, and can be used in R&D, production lines, univeristies, etc.

ITECH IT6000B Series – Regenerative Power System

IT6000B integrates bidirectional power supply and regenerative electronic load into one 3U unit. It is also a very powerful one. Only a button is needed to switch between the bidirectional power supply and the regenerative electronic load. It can be used not only as a stand-alone powerful bidirectional power supply, as a source to provide power; but also as an independent regenerative electronic load, to absorb the consumed energy and feedback cleanly to the grid. IT6000B offers standard two-quadrants functionality. IT6000B provides 7 voltage ranges, up to 2250V, supports master-slave parallel with even current distribution up to 1152kW. Built-in waveform generator supports generating arbitrary waveforms, and imports LIST files for waveforms via USB interface. IT6000B is the combination of reliability, high efficient setting, safe and multiple measurement functions. IT6000B is a family of bi-directional, regenerative power system with excellent performance, extensively used in aspects of high power battery, automotive electronics, green energy, high speed testing etc.

ITECH IT6000C Series – Bidirectional Programmable DC Power Supplies

The bidirectional programmable DC power supply of IT6000C series combines two devices in one: a power supply (source) and an electronic load (sink) with energy recovery. Based on these two functions, IT6000C bidirectional DC power supply offers the functionality of two-quadrant operation. The regenerative capability enables the energy consumed to be put back onto the grid cleanly, saving costs from energy consumption and cooling, while not interfering with the grid.

ITECH IT-M3200 Series – High Precision Programmable DC Power Supply

IT-M3200 high precision programmable DC power supply adopts a mixed modes design, which not only takes into account high power and low ripple output, but also has dynamic load response, switching between multiple current measurement ranges. It meets various current measurement requirements from ampere level to micro-ampere level. The IT-M3200 high precision power supply has a flexible modular architecture, independent multi-channel design with synchronous operation function. Users can configure each channel arbitrarily according to the test requirements of the DUT. The maximum channels is up to 16 which can meet various customized test requirements. It is widely used in the test fields of 3C products, semiconductor devices, 5G, IoT and medical electronic equipment, etc.

ITECH IT-M3600 Series – Regenerative Power System

IT-M3600 regenerative power system integrates two instruments in one, which is a bidirectional power supply and a regenerative electronic load. When used as a load, its energy recovery function can convert the absorbed DC power into AC power and return it to the grid. When used as a power supply, it can also be used as a wide range bidirectional DC power supply. IT-M3600 combines the advantages of both instruments well, and its small size of only 1U half rack also help to save your space, time and cost. IT-M3600 with high-precision output and measurement, it is suitable for multiple test fields such as multi-module batteries, multi-channel power supplies, micro inverters, and semiconductor devices.

ITECH IT-M3900B Series – Regenerative Power System

IT-M3900B regenerative power system features two units-in-one: a bidirectional DC power supply, and an independent regenerative DC electronic load. One-button-switch between source and load mode, a unique and decisive feature for the users that work in different applications such as battery, PV energy storage, electric vehicle, Green energy and some ATE fields.

ITECH IT-M3900C Series – Bidirectional Programmable DC Power Supply

IT-M3900C is a regenerative bidirectional programmable DC power supply, it is not only a stand-alone bidirectional DC power supply but also can be used as a regenerative electronic load, to absorb the consumed energy and feedback cleanly to the grid. The high-efficiency energy feedback not only saves electricity consumption and heat dissipation costs but also does not interfere with the operation of the power grid. IT-M3900C provides high accuracy output measurement, high reliability, high safety, and abundant measurement functions. Which makes IT-M3900 meet customers’ high accuracy automatic ATE testing requirements, while extensively used in aspects of automotive electronics, new energy vehicles, photovoltaic energy storage, intelligent industrial equipment, battery simulation, etc.

ITECH IT-M3900D Series – High Power DC Power Supply

The IT-M3900D series is a single channel output programmable DC power supply with a compact design to save rack space. The wide range of output design can provide a wider range of voltage and current combinations within the specified power range. One unit can be used as multiple power supplies, providing more flexibility. The CC/CV priority allows users to switch the output mode according to the different needs of the DUT priority, matched with the high-precision and high-speed product characteristics, and a variety of standard communication interfaces, simplifies and speeds up the test development. Thus, meeting the users’ variety of testing applications, widely used in laboratories, production lines, and automatic test systems.