Manufacturer of electronic and electromechanical products, including preset, elapsed time indicators (also known as time totalizers or hour meters), reset timers, repeat cycle timers, sequencers and related accessories for rugged and reliable production or run time monitoring of industrial manufacturing.

Showing 1–10 of 15 results

Eagle Signal A103 – Time Totalizer

The A103 Elapsed Time Indicators provide a range of capabilities unequaled in products of similar size and cost. A single model can be programmed to display in seconds, minutes, hours, or hours: minutes: seconds. The A103 series also includes matching indicators for count totalization and rate metering, as well as models with a preset output for control by count or time.

Eagle Signal BRE – Reset Timer

The BRE Series enclosed construction with front facing dial and knob. The BRE Series timer has a heavy duty terminal block, with 9 screw terminals that will readily accept 16 gauge wire commonly used in industrial circuit wiring.

Eagle Signal CT4 Series – CYCL-TIME Percentage Timer

The NEW CYCL-TIME™ Percent Timer Series is an accurate, economical, enclosed percentage timer designed for use in applications where a repetitive “on” time
of a fixed cycle needs to be variable. This timer series is ideally suited for irrigation controls, chemical feeding, programmed temperature, electric heaters, ovens, motor controls and lubrication systems.

Eagle Signal DG100 Series – Solid State Timer

The DG100 is a solid state timer housed in a 1/8 DIN, molded NORYL® case. The timer uses CMOS integrated circuits for the timing function. The DG100 series timer is available in 16 time ranges from 3.5 seconds to 30 hours. The DG200 series timer is a microprocessor based, four digit reset timer housed in a 1/8 DIN style enclosure. There are four time ranges from 99.99 seconds to 99 hours and 99 minutes.

Eagle Signal B506 Series – Repeat Cycle Programmable Timer

  • Three different base models: standard, high performance, and repeat cycle
  • Four digit dual line LED display indicates set value and time value
  • All models offer multiple field programmable modes of operation and time ranges
  • Multiple levels of security prevent unauthorized set value or parameter changes
  • IP65 rated for use in washdown conditions
  • Universal AC supply voltage (90-240 VAC) or 24 VAC/VDC models
  • Front panel programming with an intuitive button-per-digit interface
  • 5 amp relay output or NPN transistor
  • Industry standard 11 pin socket connection
  • Wide range of unique features for each model

Eagle Signal B856 Series – Multi-Function Timer

  • Button-per-digit preset entry simplifies setup and operation
  • High Contrast dual line LCD display indicates both Process Time and Preset Value
  • Field selectable for operation in On-Delay, Off-Delay, Interval 1, Interval 2, or Repeat Cycle modes
  • Universal Power Supply accepts 24 – 240 VAC or 24 VDC
  • Designed to meet IEC 801 level 4 noise immunity standards for increased reliability
  • Unique On-Delay/Interval mode lets one unit do the work of two in many applications
  • Industry standard socket connection
  • Programmable security levels prevent unauthorized setpoint or program changes
  • UL, CUL recognized, CE compliant
  • IEC IP65 rated front panel for use in washdown environments

Eagle Signal B866 Series – Multi-Function Analog Timer

  • Field selectable for operation in On-Delay, Off-Delay*, Interval, or Repeat Cycle modes
  • Universal power supply accepts 24 – 240 VAC or 24 VDC
  • Meets IEC 801 level 4 noise immunity standards
  • Unique On-Delay/Interval model lets one unit do the work of two in many applications
  • Industry standard socket connection
  • Front panel or DIN rail mounting
  • Flexible start and reset input signals
  • UL, CUL recognized, CE compliant
  • IP54 rated front panel – ideal for harsh environments

Eagle Signal CX200 & CX300 Series – Flex Timer Counter

  • Five time ranges from 19.999 sec. to 199 hrs.: 59 min.
  • Two count rates – accept and display counts from 1 to 19999
  • Two relay outputs – socket mounted for easy replacement
  • Two form C instantaneous contacts and two form C programmed contacts
  • N.O. solid state MOSFET, delayed action switch rated at 1 ampere continuous load current, 0-264 VAC 50/60 Hz or DC
  • Ideal output for switching low level signals and high voltage loads due to MOSFET output’s ON resistance of 0.5 ohm and very low OFF leakage
  • Programmed outputs operate in one of four load sequences; OOX, OXO, OOX with pulse output, and OOX pulse output with repeat cycle operation
  • Standard start is defined as ON delay reset timer or counter
  • For standard start units, timer/counter resets on power failure
  • Reverse start or OFF delay units will not reset on power failure and will continue cycle when power is restored
  • Non-volatile memory data retention

Eagle Signal HP5 Series – Cycle Flex Reset Timer

  • 16 standard time ranges from 5 seconds to 60 hours
  • Knob adjustable time ranges – progress pointer for each
  • Highly visible, calibrated dials (7.85 inch circumference)
  • Easily read and well-spaced calibrations
  • Red progress pointer displays remaining time interval
  • Pilot light indicates when timer motor is energized
  • Standard timers supplied with “power on” clutch operation
  • Optional reverse action clutch will not reset on power failure
  • 15 terminal ABS (UL rated 94V-0) molded housing has high impact resistance and will not support combustion

Eagle Signal HQ4 Series – Percentage Timer

  • Panel Mount
  • Settings may be made or set during timer operation
  • Designed for applications where ON time of a fixed cycle needs to be variable.
  • UL/CUL Recognition E61735