Shop
ITECH IT7800 Series – High Power Programmable AC/DC Power Supply
ITECH IT7800 is a programmable AC/DC power supply, with power up to 15kVA, voltage ranges up to 350V L-N and 500V L-N. Users are able to increase output power up to 960kVA by configuring master-slave parallel. Intuitive LCD touch panel interface allow users to quickly become familiar with unit operation.
IT7800 series has a built-in power meter and arbitrary waveform generator which is able to simulate harmonics and other arbitrary waveform output. Users can choose single phase, three-phase, phase reversal, and multi-channel 4 output modes, with programmable output, and complete measurements.
ITECH IT-M3300 Series – Regenerative DC Electronic Loads
IT-M3300 regenerative DC electronic load can not only simulate various load characteristics, but can also feed back electrical energy to the local grid instead of heat. With high power density design, it can provide up to 800W power absorption with its tiny body of only 1U half-rack. Its flexible modular architecture design can meet the test requirements of customers with different current and power. At the same time, it has high-precision output and measurement, and has made a number of safety designs for testing. It is suitable for test applications such as various types of battery discharge, multi-channel power supply, and semiconductor aging.
ITECH IT-M3800 Series – Regenerative DC Electronic Load
IT-M3800 series regenerative DC electronic load can not only perform as a DC load, but also feed power back to the grid, which saves electricity and cooling costs for you. It can complete high-precision output and measurement, and supports multiple protection functions. It is well applied to the test of 5G communication and data center, industrial components test, aging test, PV and energy storage test, power optimizer and other fields.
ITECH IT-M3200 Series – High Precision Programmable DC Power Supply
IT-M3200 high precision programmable DC power supply adopts a mixed modes design, which not only takes into account high power and low ripple output, but also has dynamic load response, switching between multiple current measurement ranges. It meets various current measurement requirements from ampere level to micro-ampere level. The IT-M3200 high precision power supply has a flexible modular architecture, independent multi-channel design with synchronous operation function. Users can configure each channel arbitrarily according to the test requirements of the DUT. The maximum channels is up to 16 which can meet various customized test requirements. It is widely used in the test fields of 3C products, semiconductor devices, 5G, IoT and medical electronic equipment, etc.
ITECH IT-M3600 Series – Regenerative Power System
IT-M3600 regenerative power system integrates two instruments in one, which is a bidirectional power supply and a regenerative electronic load. When used as a load, its energy recovery function can convert the absorbed DC power into AC power and return it to the grid. When used as a power supply, it can also be used as a wide range bidirectional DC power supply. IT-M3600 combines the advantages of both instruments well, and its small size of only 1U half rack also help to save your space, time and cost. IT-M3600 with high-precision output and measurement, it is suitable for multiple test fields such as multi-module batteries, multi-channel power supplies, micro inverters, and semiconductor devices.
ITECH IT-M3900B Series – Regenerative Power System
IT-M3900B regenerative power system features two units-in-one: a bidirectional DC power supply, and an independent regenerative DC electronic load. One-button-switch between source and load mode, a unique and decisive feature for the users that work in different applications such as battery, PV energy storage, electric vehicle, Green energy and some ATE fields.
ITECH IT-M3900C Series – Bidirectional Programmable DC Power Supply
IT-M3900C is a regenerative bidirectional programmable DC power supply, it is not only a stand-alone bidirectional DC power supply but also can be used as a regenerative electronic load, to absorb the consumed energy and feedback cleanly to the grid. The high-efficiency energy feedback not only saves electricity consumption and heat dissipation costs but also does not interfere with the operation of the power grid. IT-M3900C provides high accuracy output measurement, high reliability, high safety, and abundant measurement functions. Which makes IT-M3900 meet customers’ high accuracy automatic ATE testing requirements, while extensively used in aspects of automotive electronics, new energy vehicles, photovoltaic energy storage, intelligent industrial equipment, battery simulation, etc.
ITECH IT-M3900D Series – High Power DC Power Supply
The IT-M3900D series is a single channel output programmable DC power supply with a compact design to save rack space. The wide range of output design can provide a wider range of voltage and current combinations within the specified power range. One unit can be used as multiple power supplies, providing more flexibility. The CC/CV priority allows users to switch the output mode according to the different needs of the DUT priority, matched with the high-precision and high-speed product characteristics, and a variety of standard communication interfaces, simplifies and speeds up the test development. Thus, meeting the users’ variety of testing applications, widely used in laboratories, production lines, and automatic test systems.
ITECH IT-M3400 Series – Bidirectional DC Power Supplies
IT-M3400 bidirectional DC power supply integrates the features of a bidirectional DC power supply and a regenerative electronic load. It keeps the advantages of high power density and modular architecture design of M series. It can meet the customer’s test requirement of different current and power level. Thanks to the independent multi-channel design, users can configure each channel according to the quantity and specifications of the DUT. At the same time, it has high-precision output and measurement, and has made a number of safety designs for testing, suitable for multiple test fields, such as power modules, intelligent industrial equipment, automotive electronics, charging and discharging tests of various small capacity batteries.
ITECH IT8000 Series – Regenerative DC Electronic Loads
IT8000 series is a family of high power regenerative electronic loads with compact size. The highly integrated capability enables the e-load to simulate various e-load characteristics, and return the consumed energy back to the grid cleanly, saving costs related to energy consumption and cooling, meanwhile eco-friendly. With modular high power density design, IT8000 provide up to 18kW in 3U space. The power is expandable up to 1152kW by master-slave paralleling and active current sharing. If you move into application of high power UPS, storage battery, PV battery, EV, energy storage system, ITECH can help you with IT8000 series high power regenerative electronic load.
ITECH IT8200 Series – Regenerative AC/DC Electronic Loads
IT8200 Series is a regenerative programmable AC/DC electronic load. It is power regenerative, which not only saves electricity and cooling costs for you, but is also good for saving energy and environmental protection. AC load mode supports both rectification and non-rectification, providing CC/CR/CP/CS/CC+CR/CE operating modes. It can simulate multiple circuit topologies under CE mode such as single-phase rectification RLC Circuit and parallel RLC Circuit. IT8200 can be used in the testing of V2G, EVSE, PCS, UPS, inverter, etc. IT8200 Series utilizes a high power density design, and the power can reach 6kVA in a 2U unit and 15kVA in a 3U unit. After parallel connection, the power can be extended to 960kVA at most. Its LCD touch screen with graphical UI interface can directly define different waveforms. Combined with arbitrary waveform editing function and perfect protection function, it is an ideal choice for R&D testing and system construction.
ITECH IT8400 Series – High Performance DC Electronic Load
IT8400 high-performance DC electronic load has two voltage levels, 600V and 1200V. It supports master-slave connection in parallel with power from 6 kW to 600 kW, and is capable of fast double power loading. It has three current readback ranges with a resolution of up to 40uA. IT8400 has faster loop response and current rising and falling speed. It supports up to 8 working modes. It also has dynamic mode, List, OCP, OPP test, automatic test and battery test functions. IT8400 has built-in CAN, LAN, GPIB, USB, RS232 and analog interfaces, suitable for remote control and system building. In addition, the full protection function makes it well matched with the test of fuel cell, power battery discharge, DC charging pile, BOC, power electronics, solar, automotive high-voltage components, DC-DC, motor and other similar applications.
Rigol DP2000 Series – High Performance Linear DC Power Supplies
- Total Power: 222 Watts
- 3 channels
- Max Voltage: 64 Volts
- Max Current: 10 Amps
Rigol DP800 Series – High Performance Linear DC Power Supplies
- 140 to 200 Watt
- 1 to 3 channel models available
- Low Ripple Noise <350 uVrms/2mVpp
Rigol DP900 Series – High Performance Linear DC Power Supplies
- Total Power: 210 Watts
- 3 channels
- Max Voltage: 64 Volts
- Max Current: 6 Amps
Neureus Technologies RPSu High Precision Power Supply
The RPSu High Precision Power Supplies can deliver high current output up to 300A of maximum current and 60V of maximum voltage at 12Kw of maximum power with a long term stability of 2ppm. The RPSu is best suited for scientific and industrial applications such as particle accelerator magnets supply, medical imaging and treatment systems, and semiconductor processing.
ITECH IT7600 Series – High Performance Programmable AC Power Supplies
ITECH’s IT7600 series high performance programmable AC power supplies, adopt advanced digital signal processing technology, with frequency up to 10-5000 Hz, built-in power meter and large-screen oscilloscope function. Power up to 54 kVA and support master-slave parallel, which can provide high-capacity single-phase or three-phase AC output. The IT7600 has built-in arbitrary waveform generator to simulate a variety of waveforms; as well as strong measurement and analysis functions.
Preen AFV/APF Series – AC Power Sources
- Single phase output power from 0.5-20kVA and three phase output power from 10-2000kVA.
- CE mark with high electromagnetic compatibility performance.
- Programming Sequence Function: STEP and GRADUAL modes allow users to easily set sequences of start/ end voltage, frequency and run time for testing purposes.
ITECH IT7900 Series – Regenerative Grid Simulator
The IT7900 series is a programmable, four-quadrant grid simulator. It is also a four-quadrant power amplifier, which can be used to test various grid-connected equipment. For example, PCS, energy storage system, microgrid, BOBC (V2X), PHiL, etc. With the islanding mode (RLC settable), a single unit of IT7900 can realize the anti-islanding protection test. The power density of IT7900 series is very high, 15kVA in 3U. After parallel connection, the power can be extended up to 960kVA.
ITECH IT7900P Series – High Performance Regenerative Grid Simulator
The IT7900P series high-performance regenerative grid simulator provides an all-in-one test solution that can be used not only as a grid simulator and four-quadrant power amplifier, but also as a four-quadrant regenerative AC/DC electronic load. The full four-quadrant operation, regenerative ability can feedback power to the grid, meet the needs of environmental protection, but also saves a lot of electricity and heat dissipation costs. Compact, modular and efficient structure design allows the IT7900P up to 15kVA in 3U single unit, and its power can be extended to 960kVA after master-slave parallel connection. Colorful touch screen with intuitive GUI allows IT7900P to directly define different waveforms. The rich operation modes can meet the test requirement of single-phase, three-phase, inverse-phase and multi-channel. It provides high flexibility for testing and can be widely used in many fields such as PV, ESS and EV.
ITECH IT-M7700 Series – High Performance Programmable AC Power Supplies
ITECH IT-M7700 High Performance Programmable AC Power Supply combines intelligence and flexibility, breaks through the huge defects of the traditional AC power source, reduces the size to only 1⁄2 1U, maximizes space utilization. Built-in power meter and arbitrary waveform generator make it convenient to simulate various arbitrary waveform outputs. IT-M7700 is designed with advanced technologies of programmable AC and DC power supplies, and can be widely used in multiple fields such as power energy products, home appliances, industrial electronics, and IEC standards testing.
ITECH IT6500 Series – Wide-Range High-Power DC Power Supplies
With ITECH’s latest technology, the IT6500 series offers a full-featured high-performance power test solution. With fast response these DC power supplies provide users with a new level of power supply performance. From 800W to 30 kW, the whole series include more than 100 models. The maximum output voltage and current is up to 1000V and 1200A respectively. With its autoranging capability, it also has a super wide range of voltage and current applications. Users can choose the power supply that fits their testing requirements perfectly. IT6500C series power supplies provide built-in DIN40839 and ISO-16750-2 testing curves, support solar panel I-V curve simulation function.
APM SP-300 Series – Single Phase AC Power Supply
APM’s SP-300 Series AC Source is a single phase, multifunctional power supply able to output DC, AC and DC+AC, as well as measure electrical parameters precisely. The touch screen allows for complete, easy operation from the front of the unit, and USB data import/export. It is able to analog output normal or abnormal power input for electrical device testing. The SP Series features high speed DSP+CPLD control, high frequency PWM technology, active PFC design, and up to an 85% conversion efficiency.
- Power: 600-5000 W
- Voltage: 150-300 V
- Current: 2.8-46 A
APM SPS-300 Series – Three Phase AC Power Supply
APM’s SPS-300 Series AC Source is a 3-phase programmable AC power supply with high power density. Featuring high speed DSP+CPLD control, high frequency PWM technology, and active PFC design, the SPS-300 series is able to provide stable DC/AC output power, as well as 3-phase/1-phase output power. The touch screen allows for complete, easy operation from the front of the unit. The SPS-300 Series is applicable in multiple testing applications including electrical, lighting, and aviation.
- Power: 1200-20000 W
- Voltage: 300 V
- Current: 5.04-165.6 A
