Click here to see ITECH’s product catalogue.
IT8600 is ITECH latest series of AC/DC electronic loads with power range 0~14.4 kVA and adjustable frequency 45 Hz ~ 450 Hz. The unique oscilloscope waveform display function of IT8600’s can display input voltage & current as waveform. It is equipped with measurement modes for different parameters such as inrush current, peak value, effective value, PF (power factor). Voltage harmonics measurement capacity is up to 50th. The built-in GPIB, LAN and USB communication interfaces are for reliable and fast control. IT8600 is the perfect solution for testing UPS, inverters, AC power supplies and relevant AC electronic components etc.
IT6000B integrates bidirectional power supply and regenerative electronic load into one 3U unit. It is also a very powerful one. Only a button is needed to switch between the bidirectional power supply and the regenerative electronic load. It can be used not only as a stand-alone powerful bidirectional power supply, as a source to provide power; but also as an independent regenerative electronic load, to absorb the consumed energy and feedback cleanly to the grid. IT6000B offers standard two-quadrants functionality. IT6000B provides 7 voltage ranges, up to 2250V, supports master-slave parallel with even current distribution up to 1152kW. Built-in waveform generator supports generating arbitrary waveforms, and imports LIST files for waveforms via USB interface. IT6000B is the combination of reliability, high efficient setting, safe and multiple measurement functions. IT6000B is a family of bi-directional, regenerative power system with excellent performance, extensively used in aspects of high power battery, automotive electronics, green energy, high speed testing etc.
The bidirectional programmable DC power supply of IT6000C series combines two devices in one: a power supply (source) and an electronic load (sink) with energy recovery. Based on these two functions, IT6000C bidirectional DC power supply offers the functionality of two-quadrant operation. The regenerative capability enables the energy consumed to be put back onto the grid cleanly, saving costs from energy consumption and cooling, while not interfering with the grid.
ITECH IT7800 is a programmable AC/DC power supply, with power up to 15kVA, voltage ranges up to 350V L-N and 500V L-N. Users are able to increase output power up to 960kVA by configuring master-slave parallel. Intuitive LCD touch panel interface allow users to quickly become familiar with unit operation.
IT7800 series has a built-in power meter and arbitrary waveform generator which is able to simulate harmonics and other arbitrary waveform output. Users can choose single phase, three-phase, phase reversal, and multi-channel 4 output modes, with programmable output, and complete measurements.
IT-M3300 regenerative DC electronic load can not only simulate various load characteristics, but can also feed back electrical energy to the local grid instead of heat. With high power density design, it can provide up to 800W power absorption with its tiny body of only 1U half-rack. Its flexible modular architecture design can meet the test requirements of customers with different current and power. At the same time, it has high-precision output and measurement, and has made a number of safety designs for testing. It is suitable for test applications such as various types of battery discharge, multi-channel power supply, and semiconductor aging.
IT-M3800 series regenerative DC electronic load can not only perform as a DC load, but also feed power back to the grid, which saves electricity and cooling costs for you. It can complete high-precision output and measurement, and supports multiple protection functions. It is well applied to the test of 5G communication and data center, industrial components test, aging test, PV and energy storage test, power optimizer and other fields.
IT-M3200 high precision programmable DC power supply adopts a mixed modes design, which not only takes into account high power and low ripple output, but also has dynamic load response, switching between multiple current measurement ranges. It meets various current measurement requirements from ampere level to micro-ampere level. The IT-M3200 high precision power supply has a flexible modular architecture, independent multi-channel design with synchronous operation function. Users can configure each channel arbitrarily according to the test requirements of the DUT. The maximum channels is up to 16 which can meet various customized test requirements. It is widely used in the test fields of 3C products, semiconductor devices, 5G, IoT and medical electronic equipment, etc.
IT-M3600 regenerative power system integrates two instruments in one, which is a bidirectional power supply and a regenerative electronic load. When used as a load, its energy recovery function can convert the absorbed DC power into AC power and return it to the grid. When used as a power supply, it can also be used as a wide range bidirectional DC power supply. IT-M3600 combines the advantages of both instruments well, and its small size of only 1U half rack also help to save your space, time and cost. IT-M3600 with high-precision output and measurement, it is suitable for multiple test fields such as multi-module batteries, multi-channel power supplies, micro inverters, and semiconductor devices.
IT-M3900B regenerative power system features two units-in-one: a bidirectional DC power supply, and an independent regenerative DC electronic load. One-button-switch between source and load mode, a unique and decisive feature for the users that work in different applications such as battery, PV energy storage, electric vehicle, Green energy and some ATE fields.
IT-M3900C is a regenerative bidirectional programmable DC power supply, it is not only a stand-alone bidirectional DC power supply but also can be used as a regenerative electronic load, to absorb the consumed energy and feedback cleanly to the grid. The high-efficiency energy feedback not only saves electricity consumption and heat dissipation costs but also does not interfere with the operation of the power grid. IT-M3900C provides high accuracy output measurement, high reliability, high safety, and abundant measurement functions. Which makes IT-M3900 meet customers’ high accuracy automatic ATE testing requirements, while extensively used in aspects of automotive electronics, new energy vehicles, photovoltaic energy storage, intelligent industrial equipment, battery simulation, etc.
The IT-M3900D series is a single channel output programmable DC power supply with a compact design to save rack space. The wide range of output design can provide a wider range of voltage and current combinations within the specified power range. One unit can be used as multiple power supplies, providing more flexibility. The CC/CV priority allows users to switch the output mode according to the different needs of the DUT priority, matched with the high-precision and high-speed product characteristics, and a variety of standard communication interfaces, simplifies and speeds up the test development. Thus, meeting the users’ variety of testing applications, widely used in laboratories, production lines, and automatic test systems.
IT-M3400 bidirectional DC power supply integrates the features of a bidirectional DC power supply and a regenerative electronic load. It keeps the advantages of high power density and modular architecture design of M series. It can meet the customer’s test requirement of different current and power level. Thanks to the independent multi-channel design, users can configure each channel according to the quantity and specifications of the DUT. At the same time, it has high-precision output and measurement, and has made a number of safety designs for testing, suitable for multiple test fields, such as power modules, intelligent industrial equipment, automotive electronics, charging and discharging tests of various small capacity batteries.
IT8000 series is a family of high power regenerative electronic loads with compact size. The highly integrated capability enables the e-load to simulate various e-load characteristics, and return the consumed energy back to the grid cleanly, saving costs related to energy consumption and cooling, meanwhile eco-friendly. With modular high power density design, IT8000 provide up to 18kW in 3U space. The power is expandable up to 1152kW by master-slave paralleling and active current sharing. If you move into application of high power UPS, storage battery, PV battery, EV, energy storage system, ITECH can help you with IT8000 series high power regenerative electronic load.
ITECH’s IT7600 series high performance programmable AC power supplies, adopt advanced digital signal processing technology, with frequency up to 10-5000 Hz, built-in power meter and large-screen oscilloscope function. Power up to 54 kVA and support master-slave parallel, which can provide high-capacity single-phase or three-phase AC output. The IT7600 has built-in arbitrary waveform generator to simulate a variety of waveforms; as well as strong measurement and analysis functions.
The IT7900 series is a programmable, four-quadrant grid simulator. It is also a four-quadrant power amplifier, which can be used to test various grid-connected equipment. For example, PCS, energy storage system, microgrid, BOBC (V2X), PHiL, etc. With the islanding mode (RLC settable), a single unit of IT7900 can realize the anti-islanding protection test. The power density of IT7900 series is very high, 15kVA in 3U. After parallel connection, the power can be extended up to 960kVA.
ITECH IT-M7700 High Performance Programmable AC Power Supply combines intelligence and flexibility, breaks through the huge defects of the traditional AC power source, reduces the size to only 1⁄2 1U, maximizes space utilization. Built-in power meter and arbitrary waveform generator make it convenient to simulate various arbitrary waveform outputs. IT-M7700 is designed with advanced technologies of programmable AC and DC power supplies, and can be widely used in multiple fields such as power energy products, home appliances, industrial electronics, and IEC standards testing.
With ITECH’s latest technology, the IT6500 series offers a full-featured high-performance power test solution. With fast response these DC power supplies provide users with a new level of power supply performance. From 800W to 30 kW, the whole series include more than 100 models. The maximum output voltage and current is up to 1000V and 1200A respectively. With its autoranging capability, it also has a super wide range of voltage and current applications. Users can choose the power supply that fits their testing requirements perfectly. IT6500C series power supplies provide built-in DIN40839 and ISO-16750-2 testing curves, support solar panel I-V curve simulation function.
The unique bipolar voltage/current output makes the IT6400 series a bipolar power source or a bipolar electronic load. The battery simulating function is especially applicable for development and high speed production testing of portable, battery-operated products. IT6400 has an ultrafast transient time, less than 20 μs and resolution up to 1 nA. Its new designed speed shift mode achieves voltage/current fast rising and without overshoot, the rising time up to 150μs. Meanwhile, the waveform display function let the test be visible and simple. IT6400 series can be widely used in portable battery-operated products test, mobile power pack test, LED test and other fields.
In order to meet the bigger range of AC power supply and more complex change characteristics, engineers need more powerful and stable AC power supply to simulate the actual working environment. IT7300 series is the best solution in this area. IT7300 series can be widely applied in the electronics and electrical industry, lighting, specification verification of RD, the use of laboratory testing and factory production online test etc.
IT-M3100 series breaks through the traditional tech limits, in the ultra compact size of only 1U Half-Rack, the unit can not only output high power, but also has high performance and versatility. It supports the master-slave parallel mode. The full range of models support multiple stacking and parallel connection by handily designing “leg” plug-in. Fit with rack mount kit to achieve the perfect use.
IT6000D Series has wide range of applications and a single unit provides power range of 5kW to 144kW, current up to 2040A, as well as voltage up to 2250V. IT6000D also provides multi built-in communication interfaces to simplify and accelerate the testing development. The compact 3U design saves rack space. Multi units of the same model can be paralleled easily to have higher power and the maximum power can reach up to 1.152 MW.
IT6100 series assure you accurate measurements with 0.1mV/0.1mA high resolution and high accuracy. With high-speed List mode output and voltage rise speed up to 20ms, it can independently edit and perform the default voltage waveform to meet the high-speed test needs. IT6100 series has built-in 5 1/2 digital voltmeter and milliohm meter, which can measure additional signals. IT6100 series supports SCPI communication protocol, GPIB/USB/RS232 interfaces are optional for customers.
IT6300 series is high-performance programmable triple channel DC power supply, each output voltage and current can be set from 0 to maximum rated output. This series provides series connection, parallel connection and synchronous functions of channels which offer multi-purpose solutions for customers test. IT6300 series is with high resolution 1mV / 1mA and remote sense function, which make the test more accurate. With built-in standard USB / RS232 / GPIB communication interface, IT6300 series greatly enhance the communication speed, and customers also can adjust the digital step value by using the cursor to to facilitate the operation.
IT6700 series economical power supplies have the widest voltage and current utilizations. One power supply can replace multiple other power supplies and be widely used in various testing situations. With a capacity of 100W, voltage output of 60V, current output of 5A, they can control voltage and current change rates automatically. The power ratio can be up to 3 times. For instance, one IT6720 with up to 60 V and 5 A can substitute several previous models, allowing cost savings over the cost of multiple units.
IT6700H series high-voltage DC power supplies has a maximum output power of 3000W, adjustable voltage 0-1200V and current 0-10A. IT6700H series provide list mode, built-in RS232 / USB / GPIB communication interface, rich SCPI instructions to facilitate the setup of automated test platforms. IT6700H can accurately follow the battery charge and discharge process, widely used in battery fluctuation simulation test, battery charger, high voltage ultra high speed diode, electrolytic capacitor, electromechanical control field and ATE test system which need to use high voltage and low current DC power supply.
IT6800 series programmable power supplies (18V-150V / 72W-216W) are small in size but have high power output, and 10mV, 10mA resolution, supports RS232 / GPIB / USB communication interface.
IT6900A series wide range programmable power supply have built-in standard RS232, USB, GPIB, RS485 and analog interface, support SCPI protocol, facilitate remote control, industrial PLC control and the formation of intelligent test platform. Remote compensation terminals avoid the problem of inaccurate testing caused by voltage drop on the wire. Low ripple, low noise and built-in digital voltmeter make IT6900A easy to do external measurement. IT6900A can be widely applied in DC-DC power supply module, battery charging and sensors and other test areas.
ITECH’s IT8500+ series (150W~3000W) single-channel programmable DC electronic loads are designed for middle & high-end applications. They can be offered as multiple solutions according to design and testing requirements. The user can perform online voltage measurements and adjustments or simulate short-circuit test using the simple keypad on the front panel. IT8500+ series DC loads are versatile instruments that provide users with the ultimate testing solution.
ITECH’s IT8700 series programmable DC electronic load supports up to 16 channels with mainframe extension transient mode up to 25 kHz improving testing efficiency, all with high resolution and accuracy. IT8700 CC, CV, CR, remote sensing, short-circuit and transient mode for increased convenience.