Showing 31–46 of 46 results

ITECH IT6300 Series – Triple Output DC Power Supplies

IT6300 series is high-performance programmable triple channel DC power supply, each output voltage and current can be set from 0 to maximum rated output. This series provides series connection, parallel connection and synchronous functions of channels which offer multi-purpose solutions for customers test. IT6300 series is with high resolution 1mV / 1mA and remote sense function, which make the test more accurate. With built-in standard USB / RS232 / GPIB communication interface, IT6300 series greatly enhance the communication speed, and customers also can adjust the digital step value by using the cursor to to facilitate the operation.

Buy Online

ITECH IT6700 Series – Economical DC Power Supplies

IT6700 series economical power supplies have the widest voltage and current utilizations. One power supply can replace multiple other power supplies and be widely used in various testing situations. With a capacity of 100W, voltage output of 60V, current output of 5A, they can control voltage and current change rates automatically. The power ratio can be up to 3 times. For instance, one IT6720 with up to 60 V and 5 A can substitute several previous models, allowing cost savings over the cost of multiple units.

Buy Online

ITECH IT6700H Series – High Voltage DC Power Supplies

IT6700H series high-voltage DC power supplies has a maximum output power of 3000W, adjustable voltage 0-1200V and current 0-10A. IT6700H series provide list mode, built-in RS232 / USB / GPIB communication interface, rich SCPI instructions to facilitate the setup of automated test platforms. IT6700H can accurately follow the battery charge and discharge process, widely used in battery fluctuation simulation test, battery charger, high voltage ultra high speed diode, electrolytic capacitor, electromechanical control field and ATE test system which need to use high voltage and low current DC power supply.

ITECH IT6800 Series – Programmable DC Power Supplies

IT6800 series programmable power supplies (18V-150V / 72W-216W) are small in size but have high power output, and 10mV, 10mA resolution, supports RS232 / GPIB / USB communication interface.

Buy Online

ITECH IT6900 Series – Wide-Range Programmable DC Power Supplies

IT6900A series wide range programmable power supply have built-in standard RS232, USB, GPIB, RS485 and analog interface, support SCPI protocol, facilitate remote control, industrial PLC control and the formation of intelligent test platform. Remote compensation terminals avoid the problem of inaccurate testing caused by voltage drop on the wire. Low ripple, low noise and built-in digital voltmeter make IT6900A easy to do external measurement. IT6900A can be widely applied in DC-DC power supply module, battery charging and sensors and other test areas.

Buy Online

ITECH IT8500+ Series – Programmable DC Electronic Loads

ITECH’s IT8500+ series (150W~3000W) single-channel programmable DC electronic loads are designed for middle & high-end applications. They can be offered as multiple solutions according to design and testing requirements. The user can perform online voltage measurements and adjustments or simulate short-circuit test using the simple keypad on the front panel. IT8500+ series DC loads are versatile instruments that provide users with the ultimate testing solution.

Buy Online

ITECH IT8700 Series – Multi-channel DC Electronic Loads

ITECH’s IT8700 series programmable DC electronic load supports up to 16 channels with mainframe extension transient mode up to 25 kHz improving testing efficiency, all with high resolution and accuracy. IT8700 CC, CV, CR, remote sensing, short-circuit and transient mode for increased convenience.

ITECH IT8800 Series – High Power DC Electronic Load

IT8800 series has wide power range 150W~10kW, voltage and current measurement speed up to 50kHz, resolution up to 0.1mV/0.01mA, adjustable measurement current rising speed 0.001A/us~2.5A/us, built-in RS232/GPIB/USB interface. IT8800 series has wide application fields because of its high performance, it has been used in LED lighting, automotive electronics and other fields.

ITECH IT8900 Series – LED Test Programmable DC Electronic Loads

IT8900 series high accuracy LED specific testing electronic loads can simulate the real output of LED lights with different characteristics. Their specific circuit can realize CR-LED mode, adjustable frequency, duty ratio PWM dimming output port(frequency:20Hz-2kHz),I-pp/I-max measurement function can test current ripple and start up surge current of LED constant flow source. Voltage and current testing speed can reach 50kHz. IT8900 series provides CR-LED / CC / CV + CC / CR / CW and other working modes, built-in USB / RS232 / GPIB communication interface. Widely used in LED driver power dimming test.

ITECH IT9100 Series – Power Meters

The IT9100 power meter can provide the maximum input of 1000 V and 50 A and measurement bandwidth of 100 KHz, and can be easily used for measuring voltage, current, power, frequency, harmonics and other parameters. The standard configuration includes USB, RS232 and LAN communication interfaces and also interfaces for USB-based peripheral devices. Users can save the measured parameters into the external storage medium. The basic voltage and current accuracy is 0.1%. Moreover, the power meter has rich integrating functions, such as the active power. It is widely applied in test of motors, household appliances, UPS, etc.

Buy Online

ITECH ITS5300 – Battery Test Charge & Discharge System

ITECH’s ITS5300 is the most accurate battery testing system, and includes ITECH’s power supply and electronic load, internal resistance tester, temperature capture card and ITS5000 battery test software. With this system it is possible to do a charge test in CC/CV and a discharge test for a CC/CR/CP for multi-channel single battery/battery pack simultaneously. Moreover, it can monitor voltage, temperature, and internal resistance of each single battery, generate charge-discharge curves and save test data.

ITECH ITS9500 – Power Supply Test System

The ITS9500 power supply test system is a convenient, practical and cost-efficient testing system, designed for switching power supply tests. The standard 5U unit integrates electronic loads, programmable AC power supplies, programmable DC power supplies, noise analyzers, timing analyzers, digital electric meters, oscilloscope, I/O cards and other instruments. The ITS9500 can be installed on counter tops or inside standard cabinets.

ITECH SAS1000 – Solar Array Simulation Software

SAS1000/L solar array simulation software can accurately simulate the solar array I-V curve, maximum voltage up to 2250V, power can be extended to 1152kW. PV Inverter has fast response time, control, repeatability, high stability, precision and other characteristics. Built-in EN50530 / Sandia / NB/T32004 / CGC/GF004 / CGC/GF035’s SAS model that can easily program test regulations, materials, Vmp, Pmp parameters, simulate I-V curve characteristic output and generate reports, and can test the static & dynamic maximum power tracking performance of photovoltaic inverters.

ITECH BSS2000/BSS2000Pro – Battery Simulation Test Solution

BSS2000 & BSS2000 Pro software combined with ITECH’s latest high-performance bidirectional DC power supply, IT6000B/IT6000C/IT-M3400/IT-M3600 covers a power range up to 1152kW and can provide users with a wide range simulation solution covering low-power battery module to high-power power battery system simulation. The BSS2000 basic version, BSS2000 Pro version and BSS2000M Multi-channel version of the battery simulating software are products specifically designed for the above test scenarios. It solves the problem of increasing cost of buying and storage of different types of batteries and the battery simulator can be quickly set to different state of SoC without real charge and discharge process, greatly improving test efficiency.

ITECH IT-E165A – Anti-Reverse Protection Units

IT-E165A is an optional anti-reverse module suitable for IT6000 series products (including IT6000B, IT6000C, IT6000D, IT8000).

  • Voltage: 750-900 V
  • Current: 250-400 A

Buy Online