As a professional global power electronic instrument manufacturer, customer orientation is the underlying principle of all ITECH’s activities. We go the extra mile to know the deeper potential power testing requirements of the various industries we serve. With continuous improvement and innovation, ITECH’s wide product series bring worldwide users testing experiences to standards of excellence.
Click here to see ITECH’s product catalogue.

Showing all 44 results

ITECH IT-N6900 Series – Programmable DC Power Supply

IT-N6900 DC power supply has 60V and 150V, 850W and 1500W output. It features as black panel and HD screen, low ripple and noise. It can provide stable and pure DC power, two current ranges, up to 1μA current resolution. It has CC and CV priority settings, new Foldback protection. IT-N6900 series supports SCPI and LabVIEW drivers, built-in USB/LAN/digital IO communication interface, optional GPIB/RS232/analog IO, suitable for remote control and system integration, and can be used in R&D, production lines, univeristies, etc.

ITECH IT2800 Series – Graphical Source Measure Unit

The IT2800 Series are compact and cost-effective bench-top Source Measure Units (SMUs) with the capability to source and measure both voltage and current. The IT2800 Series combine the capabilities of a voltage source, a current source, a voltage meter, a current meter and an ohmmeter (along with the capability to switch easily between these various functions). With a current range of 10fA to 10A and a voltage range of 100nV to 1000V, the IT2800 series SMU has capabilities that allow it to perform more than just simple DC and pulsed measurements to prevent errors in measurement results due to the device’s own heating.

ITECH IT8600 Series – AC/DC Electronic Loads

IT8600 is ITECH latest series of AC/DC electronic loads with power range 0~14.4 kVA and adjustable frequency 45 Hz ~ 450 Hz. The unique oscilloscope waveform display function of IT8600’s can display input voltage & current as waveform. It is equipped with measurement modes for different parameters such as inrush current, peak value, effective value, PF (power factor). Voltage harmonics measurement capacity is up to 50th. The built-in GPIB, LAN and USB communication interfaces are for reliable and fast control. IT8600 is the perfect solution for testing UPS, inverters, AC power supplies and relevant AC electronic components etc.

ITECH IT6000B Series – Regenerative Power System

IT6000B integrates bidirectional power supply and regenerative electronic load into one 3U unit. It is also a very powerful one. Only a button is needed to switch between the bidirectional power supply and the regenerative electronic load. It can be used not only as a stand-alone powerful bidirectional power supply, as a source to provide power; but also as an independent regenerative electronic load, to absorb the consumed energy and feedback cleanly to the grid. IT6000B offers standard two-quadrants functionality. IT6000B provides 7 voltage ranges, up to 2250V, supports master-slave parallel with even current distribution up to 1152kW. Built-in waveform generator supports generating arbitrary waveforms, and imports LIST files for waveforms via USB interface. IT6000B is the combination of reliability, high efficient setting, safe and multiple measurement functions. IT6000B is a family of bi-directional, regenerative power system with excellent performance, extensively used in aspects of high power battery, automotive electronics, green energy, high speed testing etc.

ITECH IT6000C Series – Bidirectional Programmable DC Power Supplies

The bidirectional programmable DC power supply of IT6000C series combines two devices in one: a power supply (source) and an electronic load (sink) with energy recovery. Based on these two functions, IT6000C bidirectional DC power supply offers the functionality of two-quadrant operation. The regenerative capability enables the energy consumed to be put back onto the grid cleanly, saving costs from energy consumption and cooling, while not interfering with the grid.

ITECH IT7800 Series – High Power Programmable AC/DC Power Supply

ITECH IT7800 is a programmable AC/DC power supply, with power up to 15kVA, voltage ranges up to 350V L-N and 500V L-N. Users are able to increase output power up to 960kVA by configuring master-slave parallel. Intuitive LCD touch panel interface allow users to quickly become familiar with unit operation.

IT7800 series has a built-in power meter and arbitrary waveform generator which is able to simulate harmonics and other arbitrary waveform output. Users can choose single phase, three-phase, phase reversal, and multi-channel 4 output modes, with programmable output, and complete measurements.

ITECH IT-M3300 Series – Regenerative DC Electronic Loads

IT-M3300 regenerative DC electronic load can not only simulate various load characteristics, but can also feed back electrical energy to the local grid instead of heat. With high power density design, it can provide up to 800W power absorption with its tiny body of only 1U half-rack. Its flexible modular architecture design can meet the test requirements of customers with different current and power. At the same time, it has high-precision output and measurement, and has made a number of safety designs for testing. It is suitable for test applications such as various types of battery discharge, multi-channel power supply, and semiconductor aging.

ITECH IT-M3800 Series – Regenerative DC Electronic Load

IT-M3800 series regenerative DC electronic load can not only perform as a DC load, but also feed power back to the grid, which saves electricity and cooling costs for you. It can complete high-precision output and measurement, and supports multiple protection functions. It is well applied to the test of 5G communication and data center, industrial components test, aging test, PV and energy storage test, power optimizer and other fields.

ITECH IT-M3200 Series – High Precision Programmable DC Power Supply

IT-M3200 high precision programmable DC power supply adopts a mixed modes design, which not only takes into account high power and low ripple output, but also has dynamic load response, switching between multiple current measurement ranges. It meets various current measurement requirements from ampere level to micro-ampere level. The IT-M3200 high precision power supply has a flexible modular architecture, independent multi-channel design with synchronous operation function. Users can configure each channel arbitrarily according to the test requirements of the DUT. The maximum channels is up to 16 which can meet various customized test requirements. It is widely used in the test fields of 3C products, semiconductor devices, 5G, IoT and medical electronic equipment, etc.

ITECH IT-M3600 Series – Regenerative Power System

IT-M3600 regenerative power system integrates two instruments in one, which is a bidirectional power supply and a regenerative electronic load. When used as a load, its energy recovery function can convert the absorbed DC power into AC power and return it to the grid. When used as a power supply, it can also be used as a wide range bidirectional DC power supply. IT-M3600 combines the advantages of both instruments well, and its small size of only 1U half rack also help to save your space, time and cost. IT-M3600 with high-precision output and measurement, it is suitable for multiple test fields such as multi-module batteries, multi-channel power supplies, micro inverters, and semiconductor devices.

ITECH IT-M3900B Series – Regenerative Power System

IT-M3900B regenerative power system features two units-in-one: a bidirectional DC power supply, and an independent regenerative DC electronic load. One-button-switch between source and load mode, a unique and decisive feature for the users that work in different applications such as battery, PV energy storage, electric vehicle, Green energy and some ATE fields.

ITECH IT-M3900C Series – Bidirectional Programmable DC Power Supply

IT-M3900C is a regenerative bidirectional programmable DC power supply, it is not only a stand-alone bidirectional DC power supply but also can be used as a regenerative electronic load, to absorb the consumed energy and feedback cleanly to the grid. The high-efficiency energy feedback not only saves electricity consumption and heat dissipation costs but also does not interfere with the operation of the power grid. IT-M3900C provides high accuracy output measurement, high reliability, high safety, and abundant measurement functions. Which makes IT-M3900 meet customers’ high accuracy automatic ATE testing requirements, while extensively used in aspects of automotive electronics, new energy vehicles, photovoltaic energy storage, intelligent industrial equipment, battery simulation, etc.

ITECH IT-M3900D Series – High Power DC Power Supply

The IT-M3900D series is a single channel output programmable DC power supply with a compact design to save rack space. The wide range of output design can provide a wider range of voltage and current combinations within the specified power range. One unit can be used as multiple power supplies, providing more flexibility. The CC/CV priority allows users to switch the output mode according to the different needs of the DUT priority, matched with the high-precision and high-speed product characteristics, and a variety of standard communication interfaces, simplifies and speeds up the test development. Thus, meeting the users’ variety of testing applications, widely used in laboratories, production lines, and automatic test systems.

ITECH IT-M3400 Series – Bidirectional DC Power Supplies

IT-M3400 bidirectional DC power supply integrates the features of a bidirectional DC power supply and a regenerative electronic load. It keeps the advantages of high power density and modular architecture design of M series. It can meet the customer’s test requirement of different current and power level. Thanks to the independent multi-channel design, users can configure each channel according to the quantity and specifications of the DUT. At the same time, it has high-precision output and measurement, and has made a number of safety designs for testing, suitable for multiple test fields, such as power modules, intelligent industrial equipment, automotive electronics, charging and discharging tests of various small capacity batteries.

ITECH IT8000 Series – Regenerative DC Electronic Loads

IT8000 series is a family of high power regenerative electronic loads with compact size. The highly integrated capability enables the e-load to simulate various e-load characteristics, and return the consumed energy back to the grid cleanly, saving costs related to energy consumption and cooling, meanwhile eco-friendly. With modular high power density design, IT8000 provide up to 18kW in 3U space. The power is expandable up to 1152kW by master-slave paralleling and active current sharing. If you move into application of high power UPS, storage battery, PV battery, EV, energy storage system, ITECH can help you with IT8000 series high power regenerative electronic load.

ITECH IT8200 Series – Regenerative AC/DC Electronic Loads

IT8200 Series is a regenerative programmable AC/DC electronic load. It is power regenerative, which not only saves electricity and cooling costs for you, but is also good for saving energy and environmental protection. AC load mode supports both rectification and non-rectification, providing CC/CR/CP/CS/CC+CR/CE operating modes. It can simulate multiple circuit topologies under CE mode such as single-phase rectification RLC Circuit and parallel RLC Circuit. IT8200 can be used in the testing of V2G, EVSE, PCS, UPS, inverter, etc. IT8200 Series utilizes a high power density design, and the power can reach 6kVA in a 2U unit and 15kVA in a 3U unit. After parallel connection, the power can be extended to 960kVA at most. Its LCD touch screen with graphical UI interface can directly define different waveforms. Combined with arbitrary waveform editing function and perfect protection function, it is an ideal choice for R&D testing and system construction.

ITECH IT8400 Series – High Performance DC Electronic Load

IT8400 high-performance DC electronic load has two voltage levels, 600V and 1200V. It supports master-slave connection in parallel with power from 6 kW to 600 kW, and is capable of fast double power loading. It has three current readback ranges with a resolution of up to 40uA. IT8400 has faster loop response and current rising and falling speed. It supports up to 8 working modes. It also has dynamic mode, List, OCP, OPP test, automatic test and battery test functions. IT8400 has built-in CAN, LAN, GPIB, USB, RS232 and analog interfaces, suitable for remote control and system building. In addition, the full protection function makes it well matched with the test of fuel cell, power battery discharge, DC charging pile, BOC, power electronics, solar, automotive high-voltage components, DC-DC, motor and other similar applications.

ITECH IT7600 Series – High Performance Programmable AC Power Supplies

ITECH’s IT7600 series high performance programmable AC power supplies, adopt advanced digital signal processing technology, with frequency up to 10-5000 Hz, built-in power meter and large-screen oscilloscope function. Power up to 54 kVA and support master-slave parallel, which can provide high-capacity single-phase or three-phase AC output. The IT7600 has built-in arbitrary waveform generator to simulate a variety of waveforms; as well as strong measurement and analysis functions.

ITECH IT7900 Series – Regenerative Grid Simulator

The IT7900 series is a programmable, four-quadrant grid simulator. It is also a four-quadrant power amplifier, which can be used to test various grid-connected equipment. For example, PCS, energy storage system, microgrid, BOBC (V2X), PHiL, etc. With the islanding mode (RLC settable), a single unit of IT7900 can realize the anti-islanding protection test. The power density of IT7900 series is very high, 15kVA in 3U. After parallel connection, the power can be extended up to 960kVA.

ITECH IT7900P Series – High Performance Regenerative Grid Simulator

The IT7900P series high-performance regenerative grid simulator provides an all-in-one test solution that can be used not only as a grid simulator and four-quadrant power amplifier, but also as a four-quadrant regenerative AC/DC electronic load. The full four-quadrant operation, regenerative ability can feedback power to the grid, meet the needs of environmental protection, but also saves a lot of electricity and heat dissipation costs. Compact, modular and efficient structure design allows the IT7900P up to 15kVA in 3U single unit, and its power can be extended to 960kVA after master-slave parallel connection. Colorful touch screen with intuitive GUI allows IT7900P to directly define different waveforms. The rich operation modes can meet the test requirement of single-phase, three-phase, inverse-phase and multi-channel. It provides high flexibility for testing and can be widely used in many fields such as PV, ESS and EV.

ITECH IT-M7700 Series – High Performance Programmable AC Power Supplies

ITECH IT-M7700 High Performance Programmable AC Power Supply combines intelligence and flexibility, breaks through the huge defects of the traditional AC power source, reduces the size to only 1⁄2 1U, maximizes space utilization. Built-in power meter and arbitrary waveform generator make it convenient to simulate various arbitrary waveform outputs. IT-M7700 is designed with advanced technologies of programmable AC and DC power supplies, and can be widely used in multiple fields such as power energy products, home appliances, industrial electronics, and IEC standards testing.

ITECH IT6500 Series – Wide-Range High-Power DC Power Supplies

With ITECH’s latest technology, the IT6500 series offers a full-featured high-performance power test solution. With fast response these DC power supplies provide users with a new level of power supply performance. From 800W to 30 kW, the whole series include more than 100 models. The maximum output voltage and current is up to 1000V and 1200A respectively. With its autoranging capability, it also has a super wide range of voltage and current applications. Users can choose the power supply that fits their testing requirements perfectly. IT6500C series power supplies provide built-in DIN40839 and ISO-16750-2 testing curves, support solar panel I-V curve simulation function.

ITECH IT6400 Series – Bipolar DC Power Supplies and Battery Simulator

The unique bipolar voltage/current output makes the IT6400 series a bipolar power source or a bipolar electronic load. The battery simulating function is especially applicable for development and high speed production testing of portable, battery-operated products. IT6400 has an ultrafast transient time, less than 20 μs and resolution up to 1 nA. Its new designed speed shift mode achieves voltage/current fast rising and without overshoot, the rising time up to 150μs. Meanwhile, the waveform display function let the test be visible and simple. IT6400 series can be widely used in portable battery-operated products test, mobile power pack test, LED test and other fields.

Buy Online

ITECH IT7300 Series – Programmable AC Power Supplies

In order to meet the bigger range of AC power supply and more complex change characteristics, engineers need more powerful and stable AC power supply to simulate the actual working environment. IT7300 series is the best solution in this area. IT7300 series can be widely applied in the electronics and electrical industry, lighting, specification verification of RD, the use of laboratory testing and factory production online test etc.

Buy Online

ITECH IT-M3100 Series – Ultra-Compact Wide-Range DC Power Supplies

IT-M3100 series breaks through the traditional tech limits, in the ultra compact size of only 1U Half-Rack, the unit can not only output high power, but also has high performance and versatility. It supports the master-slave parallel mode. The full range of models support multiple stacking and parallel connection by handily designing “leg” plug-in. Fit with rack mount kit to achieve the perfect use.

ITECH IT-M3100D Series – Ultra-Compact Dual-channel Programmable DC Power Supplies

IT-M3100D dual-channel programmable DC power supply, only 1U half rack, provides fully isolated dual-channel output. The automatic wide-range design can provide you with higher voltage and current output, so one unit can cover a wide range of applications. Its flexible modular design, independent multi-channel design and simultaneous operation function allow you to configure each channel freely. IT-3100D dual-channel programmable DC power supply is especially suitable for production line aging test and building automated test system. At the same time, it can also be widely used in experiments and evaluation, quality management and so on.

ITECH IT6000D Series – High Power Programmable DC Power Supplies

IT6000D Series has wide range of applications and a single unit provides power range of 5kW to 144kW, current up to 2040A, as well as voltage up to 2250V. IT6000D also provides multi built-in communication interfaces to simplify and accelerate the testing development. The compact 3U design saves rack space. Multi units of the same model can be paralleled easily to have higher power and the maximum power can reach up to 1.152 MW.

ITECH IT6100 Series – Programmable DC Power Supplies

IT6100 series assure you accurate measurements with 0.1mV/0.1mA high resolution and high accuracy. With high-speed List mode output and voltage rise speed up to 20ms, it can independently edit and perform the default voltage waveform to meet the high-speed test needs. IT6100 series has built-in 5 1/2 digital voltmeter and milliohm meter, which can measure additional signals. IT6100 series supports SCPI communication protocol, GPIB/USB/RS232 interfaces are optional for customers.

ITECH IT6300 Series – Triple Output DC Power Supplies

IT6300 series is high-performance programmable triple channel DC power supply, each output voltage and current can be set from 0 to maximum rated output. This series provides series connection, parallel connection and synchronous functions of channels which offer multi-purpose solutions for customers test. IT6300 series is with high resolution 1mV / 1mA and remote sense function, which make the test more accurate. With built-in standard USB / RS232 / GPIB communication interface, IT6300 series greatly enhance the communication speed, and customers also can adjust the digital step value by using the cursor to to facilitate the operation.

Buy Online

ITECH IT6700 Series – Economical DC Power Supplies

IT6700 series economical power supplies have the widest voltage and current utilizations. One power supply can replace multiple other power supplies and be widely used in various testing situations. With a capacity of 100W, voltage output of 60V, current output of 5A, they can control voltage and current change rates automatically. The power ratio can be up to 3 times. For instance, one IT6720 with up to 60 V and 5 A can substitute several previous models, allowing cost savings over the cost of multiple units.

Buy Online

ITECH IT6700H Series – High Voltage DC Power Supplies

IT6700H series high-voltage DC power supplies has a maximum output power of 3000W, adjustable voltage 0-1200V and current 0-10A. IT6700H series provide list mode, built-in RS232 / USB / GPIB communication interface, rich SCPI instructions to facilitate the setup of automated test platforms. IT6700H can accurately follow the battery charge and discharge process, widely used in battery fluctuation simulation test, battery charger, high voltage ultra high speed diode, electrolytic capacitor, electromechanical control field and ATE test system which need to use high voltage and low current DC power supply.

ITECH IT6800 Series – Programmable DC Power Supplies

IT6800 series programmable power supplies (18V-150V / 72W-216W) are small in size but have high power output, and 10mV, 10mA resolution, supports RS232 / GPIB / USB communication interface.

Buy Online

ITECH IT6900 Series – Wide-Range Programmable DC Power Supplies

IT6900A series wide range programmable power supply have built-in standard RS232, USB, GPIB, RS485 and analog interface, support SCPI protocol, facilitate remote control, industrial PLC control and the formation of intelligent test platform. Remote compensation terminals avoid the problem of inaccurate testing caused by voltage drop on the wire. Low ripple, low noise and built-in digital voltmeter make IT6900A easy to do external measurement. IT6900A can be widely applied in DC-DC power supply module, battery charging and sensors and other test areas.

Buy Online

ITECH IT8500+ Series – Programmable DC Electronic Loads

ITECH’s IT8500+ series (150W~3000W) single-channel programmable DC electronic loads are designed for middle & high-end applications. They can be offered as multiple solutions according to design and testing requirements. The user can perform online voltage measurements and adjustments or simulate short-circuit test using the simple keypad on the front panel. IT8500+ series DC loads are versatile instruments that provide users with the ultimate testing solution.

Buy Online

ITECH IT8700 Series – Multi-channel DC Electronic Loads

ITECH’s IT8700 series programmable DC electronic load supports up to 16 channels with mainframe extension transient mode up to 25 kHz improving testing efficiency, all with high resolution and accuracy. IT8700 CC, CV, CR, remote sensing, short-circuit and transient mode for increased convenience.

ITECH IT8800 Series – High Power DC Electronic Load

IT8800 series has wide power range 150W~10kW, voltage and current measurement speed up to 50kHz, resolution up to 0.1mV/0.01mA, adjustable measurement current rising speed 0.001A/us~2.5A/us, built-in RS232/GPIB/USB interface. IT8800 series has wide application fields because of its high performance, it has been used in LED lighting, automotive electronics and other fields.

ITECH IT8900 Series – LED Test Programmable DC Electronic Loads

IT8900 series high accuracy LED specific testing electronic loads can simulate the real output of LED lights with different characteristics. Their specific circuit can realize CR-LED mode, adjustable frequency, duty ratio PWM dimming output port(frequency:20Hz-2kHz),I-pp/I-max measurement function can test current ripple and start up surge current of LED constant flow source. Voltage and current testing speed can reach 50kHz. IT8900 series provides CR-LED / CC / CV + CC / CR / CW and other working modes, built-in USB / RS232 / GPIB communication interface. Widely used in LED driver power dimming test.

ITECH IT9100 Series – Power Meters

The IT9100 power meter can provide the maximum input of 1000 V and 50 A and measurement bandwidth of 100 KHz, and can be easily used for measuring voltage, current, power, frequency, harmonics and other parameters. The standard configuration includes USB, RS232 and LAN communication interfaces and also interfaces for USB-based peripheral devices. Users can save the measured parameters into the external storage medium. The basic voltage and current accuracy is 0.1%. Moreover, the power meter has rich integrating functions, such as the active power. It is widely applied in test of motors, household appliances, UPS, etc.

Buy Online

ITECH ITS5300 – Battery Test Charge & Discharge System

ITECH’s ITS5300 is the most accurate battery testing system, and includes ITECH’s power supply and electronic load, internal resistance tester, temperature capture card and ITS5000 battery test software. With this system it is possible to do a charge test in CC/CV and a discharge test for a CC/CR/CP for multi-channel single battery/battery pack simultaneously. Moreover, it can monitor voltage, temperature, and internal resistance of each single battery, generate charge-discharge curves and save test data.

ITECH ITS9500 – Power Supply Test System

The ITS9500 power supply test system is a convenient, practical and cost-efficient testing system, designed for switching power supply tests. The standard 5U unit integrates electronic loads, programmable AC power supplies, programmable DC power supplies, noise analyzers, timing analyzers, digital electric meters, oscilloscope, I/O cards and other instruments. The ITS9500 can be installed on counter tops or inside standard cabinets.

ITECH SAS1000 – Solar Array Simulation Software

SAS1000/L solar array simulation software can accurately simulate the solar array I-V curve, maximum voltage up to 2250V, power can be extended to 1152kW. PV Inverter has fast response time, control, repeatability, high stability, precision and other characteristics. Built-in EN50530 / Sandia / NB/T32004 / CGC/GF004 / CGC/GF035’s SAS model that can easily program test regulations, materials, Vmp, Pmp parameters, simulate I-V curve characteristic output and generate reports, and can test the static & dynamic maximum power tracking performance of photovoltaic inverters.

ITECH BSS2000/BSS2000Pro – Battery Simulation Test Solution

BSS2000 & BSS2000 Pro software combined with ITECH’s latest high-performance bidirectional DC power supply, IT6000B/IT6000C/IT-M3400/IT-M3600 covers a power range up to 1152kW and can provide users with a wide range simulation solution covering low-power battery module to high-power power battery system simulation. The BSS2000 basic version, BSS2000 Pro version and BSS2000M Multi-channel version of the battery simulating software are products specifically designed for the above test scenarios. It solves the problem of increasing cost of buying and storage of different types of batteries and the battery simulator can be quickly set to different state of SoC without real charge and discharge process, greatly improving test efficiency.

ITECH IT-E165A – Anti-Reverse Protection Units

IT-E165A is an optional anti-reverse module suitable for IT6000 series products (including IT6000B, IT6000C, IT6000D, IT8000).

  • Voltage: 750-900 V
  • Current: 250-400 A