Shop
Siglent SHS1000X – Handheld Oscilloscope
- Isolation voltage: CATIII 600 Vrms, CATII 1000 Vrms
- Combines oscilloscope, serial trigger and decoder, spectrum analysis, data logger, and multimeter functions into a convenient and portable design
- Available in 100 MHz or 200 MHz bandwidth models
- Sample rate: 1 GSa/s (single-channel) or 500 MSa/s (two-channels)
- Record length: Up to 12 Mpts
- Includes hardware-based true RMS multimeter
- IP51 dust/water resistance certified
Siglent SHS800X – Handheld Oscilloscope
- Combines oscilloscope, serial trigger and decoder, spectrum analysis, data logger, and multimeter functions in a portable design
- Available in 100 MHz or 200 MHz bandwidth models
- Sampling rate: 1 GSa/s (single-channel) or 500 MSa/s (two-channels)
- Record length: Up to 12 Mpts
- Allows waveform recording for up to 22 hours
- IP51 dust/water resistance certified
Siglent SNA5000A Vector Network Analyzer
- Frequency Range: 9 kHz – 8.5 GHz and 100 kHz – 26.5 GHz
- Frequency Resolution: 1 Hz
- Output Level Setting Range: -55 dBm to +10 dBm
- Dynamic Range: 125 dB
- Supported Ports: 2/4 ports for S-parameters, Balance Measurements, and Time Domain Analysis
- Measurement Capabilities: Q-factor, bandwidth, and Insertion Loss
- Power Source Calibration Compatibility: Compatible with R&S NRPxxA/AN and Keysight U2000A/B series USB power meters
- ECal Kits Compatibility: Compatible with ECal kits from several manufacturers
Siglent SPD1000X Programmable DC Power Supply
- Single channel high-precision programmable voltage output:
- SPD1168X: 16 V / 8 A, total power up to 128 W
- SPD1305X: 30 V / 5 A, total power up to 150 W
- Stable, reliable, Low ripple and noise: ≤ 350 uVrms/3 mVpp; < 2 mArms
- Fast transient response time: < 50 μs
- 5-digit Voltage, 4-digit Current Display, Minimum Resolution: 1 mV / 1 mA
- 2.8-inch true color TFT-LCD 240×320 display
- 2 types of output modes: Two-wire output mode, 4-wire compensation output mode, Max. compensation 1 V
Siglent SPD3303C Programmable DC Power Supply
- 3 independent high precision outputs: Two 32 V / 3.2 A, One 2.5 V / 3.3 V / & 5 V / 3.2 A, totaling 220 W power
- 4-digit voltage and 3-digit current display, with minimum resolution of 10 mV and 10 mA
- Three output modes available: independent, series, and parallel
- Compatible design for 100/120/220/230 V power grids, catering to various power requirements
Siglent SPD3303X / SPD3303X-E Programmable DC Power Supply
- 3 independently controlled and isolated outputs: Two 32 V/3.2 A, one 2.5 V / 3.3 V / 5 V / 3.2 A × 1, totaling 220 W
- Voltage displayed with 5 digits, current with 4 digits, Minimum Resolution: 1 mV/1 mA (SPD3303X)
- Timing function for programmed output steps
- 4.3-inch true color TFT-LCD display with resolution of 480 x 272
- 3 types of output modes: independent, series (max 60 V), and parallel (max 6.4 A)
Siglent SPS5000X Wide Range Programmable Switching DC Power Supply
- Rated Output Voltage: 40V, 50V, 80V, 160V
- Rated Output Power: 180W, 360W, 720W, 1080W
- Wide range of output voltage and current, providing high efficiency power supply
- Selection between CV and CC priority modes for better protection of equipment under test
- Load transient recovery time (Load change from 50~100%): <1ms
- Adjustable slew rate of output voltage and current
- Setting and readback resolution: 1 mV, 1 mA
Siglent SSA3000X – Spectrum Analyzer
- All-Digital IF Technology
- Frequency Range from 9 kHz to 2.1/3.2 GHz
- -161 dBm/Hz Displayed Average Noise Level (Typ.)
- -98 dBc/Hz @10 kHz Offset Phase Noise (1 GHz, Typ.)
- Total Amplitude Accuracy < 0.7 dB
- 1 Hz Minimum Resolution Bandwidth (RBW)
- Tracking generator (TG) is currently included at no charge
Siglent SSA3000X Plus – Spectrum Analyzer
- Frequency Range: 9 kHz to 1.5 GHz / 2.1 GHz / 3.2 GHz / 7.5 GHz
- Displayed Average Noise Level (Typ.): -165 dBm/Hz
- Offset Phase Noise (Typ.): -98 dBc/Hz @10 kHz Offset (1 GHz)
- Total Amplitude Accuracy: < 0.7 dB
- Screen: 10.1-inch Multi-Touch
- Input Support: Mouse and Keyboard
- Remote Control: Web Browser Remote Control on PC and Mobile Terminals
- File Operation: Supported
Siglent SSA3000X-R – Real-Time Spectrum Analyzer
- Spectrum Analyzer Frequency Range from 9 kHz up to 3.2 GHz / 5.0 GHz / 7.5 GHz
- Now with VNA and DTF functions, free!
- -165 dBm/Hz Displayed Average Noise Level (Typ.)
- -98 dBc/Hz.@10 kHz Offset Phase Noise (1 GHz, Typ.)
- Level Measurement Uncertainty < 0.7 dB (Typ.)
- Up to 40 MHz Real Time Analysis Bandwidth
- Web Browser Remote Control on PC and Mobile Terminals and File Operation
Siglent SSA5000A – Spectrum Analyzer
- Frequency Range from 9 kHz up to 13.6 /26.5 GHz
- -165 dBm/Hz Displayed Average Noise Level (Typ.)
- -105 dBc/Hz@1 GHz,10 kHz offset SSB Phase Noise (Typ.)
- 25 MHz/40 MHz Realtime Spectrum Analysis Bandwidth
- Analog Modulation Analysis and Vector Digital Modulation Analysis
- Channel power, ACPR, OBW, Harmonics, and TOI measurement option
- Web Browser for easy Remote Control over LAN
Siglent SSG3000X – RF Signal Generator
- Frequency ranging from 2.1 GHz to 3.2 GHz
- Peak output level reaching up to +20 dBm on average
- Output level spanning from -110 dBm to +13 dBm
- Precise level accuracy of ≤0.7 dB on average
- Support for standard AM, FM, PM, and pulse modulation
- Option for Pulse Train Generator included
Siglent SSG5000A – RF Signal Generator
- Frequency range extends up to 13.6 GHz / 20 GHz
- Offers a frequency setting resolution of 0.001 Hz
- Level setting range spans from -130 dBm to 25 dBm
- Typical Phase Noise is -120 dBc/Hz @ 1 GHz, 20 kHz offset
- Typical Level error is ≤ 0.7 dB
- Supports standard AM, FM, PM, and pulse modulation
- Option for single pulse, double pulse, and pulse train generator available
Siglent SSG5000X – RF Signal Generator
- Frequency up to 4 GHz/6 GHz
- 0.001 Hz frequency setting resolution
- Maximum output power up to +26 dBm (typ.)
- Phase Noise: -120 dBc/ Hz @ 1 GHz, 20 kHz offset (typ.)
- Single pulse, double pulse and pulse train generator (option)
Siglent SSG6000A – Microwave Analog Signal Generator
- Advanced DDS technology, 125 MSa/s sampling rate, 14-bit vertical resolution
- Single channel output, 5 standard waveforms, 46 built-in arbitrary waveforms (including DC)
- Complete modulation functions: AM, DSB-AM, FM, PM, FSK, ASK, PWM, linear/logarithmic sweep, and burst
Siglent SSU5000A Mechanical Switch
- Maximum frequency: 18 GHz / 26.5 GHz / 50 GHz
- Configurations: 1 to 4 SPDT switches or 1 to 2 SP6T switch configurations
- SCPI Controllable via VISA and EasySSU software
- USB Connectivity
- Size: W×H×D=153×62.4×137.5mm
- RF connector: SMA female or 2.4mm female
Siglent SSU5000A Switch Matrix
- Maximum Frequency Options: 9 GHz / 26.5 GHz
- Maximum Number of Input Ports: 4
- Maximum Number of Output Ports: 24
- RF Connector: 3.5mm female
- Supports a simplified multi-port calibration algorithm
- Interface Options: LAN, USB Device, Direct Control (in), Direct Control (out)
Siglent SVA1000X – Spectrum & Vector Analyzer
- Vector Network Analysis: Now included as standard, covering frequencies from 100 kHz to 3.2 / 7.5 GHz
- Distance-to-fault: Optional feature
- Spectrum Analyzer mode: Frequency range extends from 9 kHz to 1.5 / 3.2 / 7.5 GHz
- Displayed Average Noise Level (Typ.): -156 dBm/Hz / -161 dBm/Hz / -165 dBm/Hz
- Offset Phase Noise (Typ.): -99 dBc/Hz @10 kHz Offset (1 GHz)
- Minimum Resolution Bandwidth (RBW): 1 Hz
Eagle Signal A103 – Time Totalizer
The A103 Elapsed Time Indicators provide a range of capabilities unequaled in products of similar size and cost. A single model can be programmed to display in seconds, minutes, hours, or hours: minutes: seconds. The A103 series also includes matching indicators for count totalization and rate metering, as well as models with a preset output for control by count or time.
Eagle Signal BRE – Reset Timer
The BRE Series enclosed construction with front facing dial and knob. The BRE Series timer has a heavy duty terminal block, with 9 screw terminals that will readily accept 16 gauge wire commonly used in industrial circuit wiring.
Eagle Signal CT4 Series – CYCL-TIME Percentage Timer
The NEW CYCL-TIME™ Percent Timer Series is an accurate, economical, enclosed percentage timer designed for use in applications where a repetitive “on” time
of a fixed cycle needs to be variable. This timer series is ideally suited for irrigation controls, chemical feeding, programmed temperature, electric heaters, ovens, motor controls and lubrication systems.
Eagle Signal DG100 Series – Solid State Timer
The DG100 is a solid state timer housed in a 1/8 DIN, molded NORYL® case. The timer uses CMOS integrated circuits for the timing function. The DG100 series timer is available in 16 time ranges from 3.5 seconds to 30 hours. The DG200 series timer is a microprocessor based, four digit reset timer housed in a 1/8 DIN style enclosure. There are four time ranges from 99.99 seconds to 99 hours and 99 minutes.
Rigol DS70000 StationMax Series – Digital Oscilloscopes with Real‐Time Spectrum Analysis
Rigol’s DS70000 series combines 5 instruments into 1: including a digital oscilloscope, spectrum analyzer, digital voltmeter, high precision frequency counter and totalizer, and protocol analyzer.
- 15.6 ” capacitive multi-touch flip screen/gesture enabled operation
- Bandwidth: 3 GHz – 5 GHz
- Maximum Sample Rate: 20 GSa/s
- Maximum Memory Depth: 2 Gpts
- Maximum Waveform Capture Rate: ≥1,000,000 wfms/s
- Vertical Resolution: 8-16 bits
- 4 analog channels, 1 EXT channel input
Veeder-Root 7443 – General Purpose Totalizer
The perfect totalizer for a wide range of industrial applications. Precision internal working parts are supported and protected by its die-cast frame and heavy duty enclosure. Available with popular AC and DC voltage ranges, mounting styles, and reset features.
Veeder-Root 7790 & 7791 – Miniature Electro-Mechanical Totalizer
The 7790 Series is a non-reset totalizer that delivers excellent performance and reliability characteristics for a minimal price. The 7791 Series includes a push-bar reset feature. These totalizers have a compact size and five or six digit indication.
Veeder-Root 7999-MITE – Electronic Totalizer
The 7999 MITE Series is a versatile family of LCD totalizers that includes unidirectional and bidirectional models. Based on the latest CMOS circuitry, they feature a long-life internal power source, high count-speed capability, and eight digit liquid crystal display. The bidirectional MITE totalizer provides count/direction operation – one input receives count pulses, while a second input controls counting direction.
Veeder-Root DZ100 MINIFLEX – Electronic Predetermining Counter
The DZ100 is a solid state counter which uses CMOS integrated circuits for the counting function. Counter output action occurs when the count total, indicated by front mounted thumbwheel switches, is reached. Solid state counter housed in a 1/8 DIN molded NORYL® case.
Monarch illumiNova Fixed Mount LED Stroboscope
The illumiNova fixed mount LED stroboscopic inspection systems are designed for continuous use in high speed applications requiring crisp, clear, stop motion quality inspection. The extraordinarily bright LED’s provide an ultra uniform white spectrum light. Available in a six inch model or one foot lengths up to 8 feet, with 3 different lens options to ensure you will have light coverage for any job. The powerful on board intuitive digital controller allows the user to quickly set flash rates, flash duration, brightness levels and many other advanced features. Flash rates can also be triggered remotely using machine mounted sensors connected directly to illumiNova’s digital input or use the optional remote controller to extend the operating distance up to 100 feet.
Rigol DS1000Z Series – Mixed Signal Oscilloscopes
- 50MHz to 200MHz Bandwidth, 2-4 channels
- 1GSa/s Real-time Sample Rate
- 24Mpts Memory Depth
Monarch P5-11 Proximity Sensor
1-60,000 RPM. The P5-11 Proximity Sensor is a rugged industrial 2 wire probe style inductive sensor. It can be used 0.2 inches (5mm) from a 0.5 inch (12mm) metallic target such as a bolt head or shaft locking key.
