Shop
ITECH IT8200 Series – Regenerative AC/DC Electronic Loads
IT8200 Series is a regenerative programmable AC/DC electronic load. It is power regenerative, which not only saves electricity and cooling costs for you, but is also good for saving energy and environmental protection. AC load mode supports both rectification and non-rectification, providing CC/CR/CP/CS/CC+CR/CE operating modes. It can simulate multiple circuit topologies under CE mode such as single-phase rectification RLC Circuit and parallel RLC Circuit. IT8200 can be used in the testing of V2G, EVSE, PCS, UPS, inverter, etc. IT8200 Series utilizes a high power density design, and the power can reach 6kVA in a 2U unit and 15kVA in a 3U unit. After parallel connection, the power can be extended to 960kVA at most. Its LCD touch screen with graphical UI interface can directly define different waveforms. Combined with arbitrary waveform editing function and perfect protection function, it is an ideal choice for R&D testing and system construction.
ITECH IT8400 Series – High Performance DC Electronic Load
IT8400 high-performance DC electronic load has two voltage levels, 600V and 1200V. It supports master-slave connection in parallel with power from 6 kW to 600 kW, and is capable of fast double power loading. It has three current readback ranges with a resolution of up to 40uA. IT8400 has faster loop response and current rising and falling speed. It supports up to 8 working modes. It also has dynamic mode, List, OCP, OPP test, automatic test and battery test functions. IT8400 has built-in CAN, LAN, GPIB, USB, RS232 and analog interfaces, suitable for remote control and system building. In addition, the full protection function makes it well matched with the test of fuel cell, power battery discharge, DC charging pile, BOC, power electronics, solar, automotive high-voltage components, DC-DC, motor and other similar applications.
Rigol DP2000 Series – High Performance Linear DC Power Supplies
- Total Power: 222 Watts
- 3 channels
- Max Voltage: 64 Volts
- Max Current: 10 Amps
Rigol DP800 Series – High Performance Linear DC Power Supplies
- 140 to 200 Watt
- 1 to 3 channel models available
- Low Ripple Noise <350 uVrms/2mVpp
Rigol DP900 Series – High Performance Linear DC Power Supplies
- Total Power: 210 Watts
- 3 channels
- Max Voltage: 64 Volts
- Max Current: 6 Amps
Neureus Technologies RPSu High Precision Power Supply
The RPSu High Precision Power Supplies can deliver high current output up to 300A of maximum current and 60V of maximum voltage at 12Kw of maximum power with a long term stability of 2ppm. The RPSu is best suited for scientific and industrial applications such as particle accelerator magnets supply, medical imaging and treatment systems, and semiconductor processing.
ITECH IT7600 Series – High Performance Programmable AC Power Supplies
ITECH’s IT7600 series high performance programmable AC power supplies, adopt advanced digital signal processing technology, with frequency up to 10-5000 Hz, built-in power meter and large-screen oscilloscope function. Power up to 54 kVA and support master-slave parallel, which can provide high-capacity single-phase or three-phase AC output. The IT7600 has built-in arbitrary waveform generator to simulate a variety of waveforms; as well as strong measurement and analysis functions.
Preen AFV/APF Series – AC Power Sources
- Single phase output power from 0.5-20kVA and three phase output power from 10-2000kVA.
- CE mark with high electromagnetic compatibility performance.
- Programming Sequence Function: STEP and GRADUAL modes allow users to easily set sequences of start/ end voltage, frequency and run time for testing purposes.
ITECH IT7900 Series – Regenerative Grid Simulator
The IT7900 series is a programmable, four-quadrant grid simulator. It is also a four-quadrant power amplifier, which can be used to test various grid-connected equipment. For example, PCS, energy storage system, microgrid, BOBC (V2X), PHiL, etc. With the islanding mode (RLC settable), a single unit of IT7900 can realize the anti-islanding protection test. The power density of IT7900 series is very high, 15kVA in 3U. After parallel connection, the power can be extended up to 960kVA.
ITECH IT7900P Series – High Performance Regenerative Grid Simulator
The IT7900P series high-performance regenerative grid simulator provides an all-in-one test solution that can be used not only as a grid simulator and four-quadrant power amplifier, but also as a four-quadrant regenerative AC/DC electronic load. The full four-quadrant operation, regenerative ability can feedback power to the grid, meet the needs of environmental protection, but also saves a lot of electricity and heat dissipation costs. Compact, modular and efficient structure design allows the IT7900P up to 15kVA in 3U single unit, and its power can be extended to 960kVA after master-slave parallel connection. Colorful touch screen with intuitive GUI allows IT7900P to directly define different waveforms. The rich operation modes can meet the test requirement of single-phase, three-phase, inverse-phase and multi-channel. It provides high flexibility for testing and can be widely used in many fields such as PV, ESS and EV.
