Showing all 37 results

Eagle Signal A103 – Time Totalizer

The A103 Elapsed Time Indicators provide a range of capabilities unequaled in products of similar size and cost. A single model can be programmed to display in seconds, minutes, hours, or hours: minutes: seconds. The A103 series also includes matching indicators for count totalization and rate metering, as well as models with a preset output for control by count or time.

Eagle Signal BRE – Reset Timer

The BRE Series enclosed construction with front facing dial and knob. The BRE Series timer has a heavy duty terminal block, with 9 screw terminals that will readily accept 16 gauge wire commonly used in industrial circuit wiring.

Eagle Signal CT4 Series – CYCL-TIME Percentage Timer

The NEW CYCL-TIME™ Percent Timer Series is an accurate, economical, enclosed percentage timer designed for use in applications where a repetitive “on” time
of a fixed cycle needs to be variable. This timer series is ideally suited for irrigation controls, chemical feeding, programmed temperature, electric heaters, ovens, motor controls and lubrication systems.

Eagle Signal DG100 Series – Solid State Timer

The DG100 is a solid state timer housed in a 1/8 DIN, molded NORYL® case. The timer uses CMOS integrated circuits for the timing function. The DG100 series timer is available in 16 time ranges from 3.5 seconds to 30 hours. The DG200 series timer is a microprocessor based, four digit reset timer housed in a 1/8 DIN style enclosure. There are four time ranges from 99.99 seconds to 99 hours and 99 minutes.

Veeder-Root 7443 – General Purpose Totalizer

The perfect totalizer for a wide range of industrial applications. Precision internal working parts are supported and protected by its die-cast frame and heavy duty enclosure. Available with popular AC and DC voltage ranges, mounting styles, and reset features.

Veeder-Root 7790 & 7791 – Miniature Electro-Mechanical Totalizer

The 7790 Series is a non-reset totalizer that delivers excellent performance and reliability characteristics for a minimal price. The 7791 Series includes a push-bar reset feature. These totalizers have a compact size and five or six digit indication.

Veeder-Root 7999-MITE – Electronic Totalizer

The 7999 MITE Series is a versatile family of LCD totalizers that includes unidirectional and bidirectional models. Based on the latest CMOS circuitry, they feature a long-life internal power source, high count-speed capability, and eight digit liquid crystal display. The bidirectional MITE totalizer provides count/direction operation – one input receives count pulses, while a second input controls counting direction.

Veeder-Root DZ100 MINIFLEX – Electronic Predetermining Counter

The DZ100 is a solid state counter which uses CMOS integrated circuits for the counting function. Counter output action occurs when the count total, indicated by front mounted thumbwheel switches, is reached. Solid state counter housed in a 1/8 DIN molded NORYL® case.

ATS AE1X Series

One Inch High, Bright Red LED Digits, visible up to 50 feet away. Models include four- or six-digit clocks, timers, counters, process indicators, RS232 displays, and production monitors

ATS AE2X Series

2.3-Inch-High, Bright Red LED Digits, visible up to 110 feet away. Models include four- or six-digit clocks, timers, counters, process indicators, RS232 displays, and production monitors.

ATS AE4X Series

Four Inch High, Super Bright Red, Dot or Bar Segment LED Digits, visible up to 200 feet away. Models include four- or six-digit clocks, timers, counters, process indicators, RS232 displays, and production monitors. Also available are: two, three, and five-digit models.

ATS AE8X Series

Eight Inch High, Super Bright Red, Dot Segment LED Digits, visible up to 400 feet away. Models include four- or six-digit clocks, timers, counters, process indicators, RS232 displays, and production monitors. Also available are: two, three, and five-digit models.

ATS AE12X Series

Twelve Inch High, Super Bright Red, Dot Segment LED Digits, visible up to 500 feet away. Models include four- or six-digit clocks, timers, counters, process indicators, RS232 displays, and production monitors. Also available are: two, three, and five-digit models

ATS CC Series

The CC Series System Clocks provide an economical solution for any size clock system. They are easily corrected by master clock systems. In addition, all CC Series System Clocks can receive serial data input from computers or other controllers. Up to 50 clocks can be connected to a standard RS232 Port at distances of up to 2000 feet away. Signal drivers are available for adding additional clocks and greater distances.

ATS STD Series

Measure and display accurate Elapsed Time with the STD Series Precision Timer. Interchanges with standard electric time models, and no panel modification required. The STD-11-2 displays 0.000 to 9999.999 seconds; while the STD-525T displays in minutes, seconds, tenths of seconds, and hundredths of seconds.

ATS MC Series

The MC Series Master Clocks are available in various configurations depending on the type of enclosure and the number of relay outputs required. All have the same powerful operating program which provides up to 100 events per day, Annual Programming and keyboard selectable, secondary clock correction. Correction for most analog and digital secondary clocks, including three-wire synchronous, minute impulse, bi-polar minute impulse and all Midnight synchronized digital clocks, is built-in. An RS232 Output driver comes standard in the MC4181NX, MC4181LV, and MC41P models for driving ATS AE and CC Series Large Digital clocks with the RS232 input.

DEIF XDi – Flexible Display Indicator

  • TFT graphical LED 3.5, 5 or 7″ display
  • Multiple virtual indicator layouts selectable from library
  • Standard and custom scale designs
  • Displays 1 or more values
  • 96, 144 or 192 DIN cutouts
  • XDi-Net – a short-cut to CAN bus
  • Reduced wiring and installation
  • Instant repairs on board
  • Analogue and digital readout combined
  • Optional analogue or digital input
  • Standard day and night designs
  • Dusk designs on request
  • MED and other relevant class approvals

DEIF XDi-N – Flexible Display Indicator (Navigation)

  • TFT graphical LED 3.5, 5 or 7″ display
  • Two CAN ports with CANopen and XDi-net
  • Redundant power inputs
  • XDi-Net – add multiple XDi indicators
  • Up to six NMEA inputs & up to four outputs
  • NMEA data offset and averaging functions
  • Dimmer controllable using front/external pushbuttons, analogue, NMEA or CAN/XDi-net.
  • 3 level priority data fall-back function
  • True wind data calculation
  • Calculate magnetic or true heading
  • XDi-net group dimmer and day/night colour shift
  • Toggle between up to four predefined indicator screens using the mode function
  • Quick-switch between measuring units either locally or for the entire system
  • Customised indicator designs available on request
  • Standard day and night designs, dusk on request

Eagle Signal B506 Series – Repeat Cycle Programmable Timer

  • Three different base models: standard, high performance, and repeat cycle
  • Four digit dual line LED display indicates set value and time value
  • All models offer multiple field programmable modes of operation and time ranges
  • Multiple levels of security prevent unauthorized set value or parameter changes
  • IP65 rated for use in washdown conditions
  • Universal AC supply voltage (90-240 VAC) or 24 VAC/VDC models
  • Front panel programming with an intuitive button-per-digit interface
  • 5 amp relay output or NPN transistor
  • Industry standard 11 pin socket connection
  • Wide range of unique features for each model

Eagle Signal B856 Series – Multi-Function Timer

  • Button-per-digit preset entry simplifies setup and operation
  • High Contrast dual line LCD display indicates both Process Time and Preset Value
  • Field selectable for operation in On-Delay, Off-Delay, Interval 1, Interval 2, or Repeat Cycle modes
  • Universal Power Supply accepts 24 – 240 VAC or 24 VDC
  • Designed to meet IEC 801 level 4 noise immunity standards for increased reliability
  • Unique On-Delay/Interval mode lets one unit do the work of two in many applications
  • Industry standard socket connection
  • Programmable security levels prevent unauthorized setpoint or program changes
  • UL, CUL recognized, CE compliant
  • IEC IP65 rated front panel for use in washdown environments

Eagle Signal B866 Series – Multi-Function Analog Timer

  • Field selectable for operation in On-Delay, Off-Delay*, Interval, or Repeat Cycle modes
  • Universal power supply accepts 24 – 240 VAC or 24 VDC
  • Meets IEC 801 level 4 noise immunity standards
  • Unique On-Delay/Interval model lets one unit do the work of two in many applications
  • Industry standard socket connection
  • Front panel or DIN rail mounting
  • Flexible start and reset input signals
  • UL, CUL recognized, CE compliant
  • IP54 rated front panel – ideal for harsh environments

Eagle Signal CX200 & CX300 Series – Flex Timer Counter

  • Five time ranges from 19.999 sec. to 199 hrs.: 59 min.
  • Two count rates – accept and display counts from 1 to 19999
  • Two relay outputs – socket mounted for easy replacement
  • Two form C instantaneous contacts and two form C programmed contacts
  • N.O. solid state MOSFET, delayed action switch rated at 1 ampere continuous load current, 0-264 VAC 50/60 Hz or DC
  • Ideal output for switching low level signals and high voltage loads due to MOSFET output’s ON resistance of 0.5 ohm and very low OFF leakage
  • Programmed outputs operate in one of four load sequences; OOX, OXO, OOX with pulse output, and OOX pulse output with repeat cycle operation
  • Standard start is defined as ON delay reset timer or counter
  • For standard start units, timer/counter resets on power failure
  • Reverse start or OFF delay units will not reset on power failure and will continue cycle when power is restored
  • Non-volatile memory data retention

Eagle Signal HP5 Series – Cycle Flex Reset Timer

  • 16 standard time ranges from 5 seconds to 60 hours
  • Knob adjustable time ranges – progress pointer for each
  • Highly visible, calibrated dials (7.85 inch circumference)
  • Easily read and well-spaced calibrations
  • Red progress pointer displays remaining time interval
  • Pilot light indicates when timer motor is energized
  • Standard timers supplied with “power on” clutch operation
  • Optional reverse action clutch will not reset on power failure
  • 15 terminal ABS (UL rated 94V-0) molded housing has high impact resistance and will not support combustion

Eagle Signal HQ4 Series – Percentage Timer

  • Panel Mount
  • Settings may be made or set during timer operation
  • Designed for applications where ON time of a fixed cycle needs to be variable.
  • UL/CUL Recognition E61735

Eagle Signal HQ9 Series – Percentage Timer

  • Panel Mount
  • Electrically isolated pilot light
  • Cycle progress pointer
  • Compatible with CYCL-FLEX® series featuring unique plug-in mounting
  • UL Recognition E61735 CSA Certification LR26861

Eagle Signal MAX Count Series – 16 Preset Advanced Counters

  • Simultaneous Counter, Totalizer, and Batching
  • “ON THE FLY” Preset Programming
  • A-B, A+B and Quadrature operation
  • Sixteen Preset, Six Decade Main Counter
  • Single Preset, Six Decade Batch Counter
  • Six Decade Background Totalizer
  • 4 Wire / 2 Wire RS-485 Provides LOCAL & REMOTE process Control Capability with Modbus RTU protocol
  • Six Decade Start Count Preset
  • Counter Reset, Stop / Hold / (*Step Back) Inputs

Eagle Signal MAX Position Advanced Series – Advanced Position Indicator

  • Bidirectional (go thru zero) counter
  • Non-Volatile counter operation.
  • Four user programmable preset setpoints
  • Programmable reference setpoint
  • Programmable Operation; A-B, A+B, Quad
  • Programmable 6 decade correction constant
  • Selectable Input logic; x1, x2 and x4
  • STOP/HOLD, REFERENCE ENABLE, OUTPUT DISABLE and REFERENCE Control inputs
  • 4 Wire / 2 Wire RS-485 Provides LOCAL and REMOTE process Control Capability Modbus RTU protocol
  • FRAM Memory for Setpoint storage
  • Built In Self- Diagnostics
  • Eight Alpha Numeric, 14 Segments LED display

Eagle Signal MAX Tach Series – Tachometers

  • Time Interval Measurement Technique
  • Dual High speed Rate Inputs
  • Automatic Averaging
  • Dual Programmable Calibrators on Rate inputs
  • Programmable Rate and Draw Display modes
  • Control Inputs (Unlatch and Disable)
  • Six Solid State Alarm Outputs
  • 4 Wire / 2 Wire RS-485 Provides LOCAL and REMOTE process Control Capability Modbus RTU protocol
  • Non-Volatile Memory (FRAM) for Programmed parameters
  • Built In Self- Diagnostics
  • Eight Alpha Numeric, 14 Segments LED display

Eagle Signal SX Series – Preset Counters

  • NEMA 4 Hosedown Test rated
  • Eight output operating modes programmable for one or both outputs
  • Programmable Early Trip pre-warn operation
  • Time inhibit input
  • LED indicators for output status
  • Setpoint to zero or zero to setpoint cycle progress indication
  • Front panel and remote reset inputs
  • Keypad lock function
  • Nonvolatile memory (NOVRAM) for program and data retention
  • Removable terminal blocks for wiring connections
  • +12 VDC, 75 milliamp sensor power supply

Veeder-Root 7437 Series – Electro-Mechanical Totalizer

  • Non-resettable
  • Broad range of standard AC and DC models
  • Base mount and panel mount styles
  • High contrast white-on-black figures
  • cUL recognized; CSA certified
  • Tamper resistant construction
  • Capable of speeds to 600 counts/minute
  • Thermo-stable materials used for long term reliability

Veeder-Root 7438 Series – Electro-Mechanical Totalizer

  • Resettable
  • Broad range of standard AC and DC models
  • Base mount and panel mount styles
  • High contrast white-on-black figures
  • cUL recognized; CSA certified
  • Tamper resistant construction
  • Capable of speeds to 600 counts/minute
  • Thermo-stable materials used for long term reliability

Veeder-Root 7441 Series – Electro-Mechanical Predetermining Counter

  • Reliable operation at counting speeds to 1500/minute
  • Underwriters Laboratories Recognized
  • 5 figure count display and preset capability
  • Models for AC and DC operation
  • Compact size – 2″ wide (50.8mm), 1″ high (25.4mm)
  • Rugged, high impact plastic and stainless steel case
  • Unique preset interlock prevents accidental change
  • Form C (SPDT) output contacts rated at 1 amp.
  • Models available with electric remote-reset
  • Convenient plug-in connector

Veeder-Root A103 Series – Preset Counters

  • Matching totalizing counter, time and rate indicators and controllers available
  • SSR relay output—selectable normally-open or normally-closed operation
  • High visibility 7-digit LCD display with backlighting capability standard
  • Long life 3 Volt lithium battery eliminates the need for external power
  • Accepts input signals from a variety of sources: Dry Contact, PNP or NPN Sensors, Encoders
  • High speed and low speed count inputs
  • Resettable remotely or from the front panel
  • Programmable security of front panel reset button and preset entry
  • Option modules provide additional functionality and added convenience
  • NEMA 4X/IP65 rated front panel for use in washdown environments

Veeder-Root C342 Series – DIN Time Totalizer

  • Available models include count and time totalization and rate metering
  • Bidirectional model suited for position and length measurements
  • Crisp 8 digit LCD display provides easy to read process values
  • Compact 1/32 DIN bezel and 32mm behind the panel depth save panel space
  • Choose from internal battery or DC powered units
  • Power by 12 – 24 VDC, with nonvolatile RAM for retention of process value and settings
  • Field programmable for NPN or PNP signals
  • Hi-speed (7.5 kHz) or low speed (30 Hz) filtering
  • Display can be reset from the front panel or remotely; front reset button can be disabled
  • IEC IP65 rated front panel for use in washdown environments

Veeder-Root C628 Series – Totalizers

  • 0.71” high digit LED display (27% larger than other 1/8 DIN units)
  • Programmable color change display based on an event
  • Batch units – Independent display of background total
  • Programmable help function and secondary legend display
  • Dual preset units – Preset 1 programmable as absolute value or prewarn which tracks Preset 2
  • Choice of NPN or PNP primary input
  • Filter speed settable for 20, 200, or 10,000 Hz
  • Standard Outputs: 1 NPN transistor (2 NPN transistors on Dual & Batch units) & 1 relay (optional 2nd relay on Dual & Batch units)
  • Front panel reset enable and preset lockout
  • Optional RS-485 plug in card
  • CE approved, UL, CUL recognized

Veeder-Root S628 Series – Digital Process Indicator

  • 0.71” high digit LED display (27% larger than other 1/8 DIN units)
  • Programmable color change display based on an event
  • Programmable help function and secondary legend display
  • Field configurable alarm outputs
  • Max. and min. value capture
  • Plug in option cards include: 2nd relay, digital input, linear output, RS-485 communication
  • Transmitter power simplifies wiring
  • mA inputs to 50mA, DCV inputs to ±10 Volts and ±100 mV
  • Tare function
  • Standard outputs: 2 NPN transistors & 1 relay (optional 2nd relay)
  • 100 ms sample time with 0.03% accuracy
  • CE approved

Veeder-Root VC772 Series – Multi-function Counter

  • Versatile all-in-one 1/16 DIN size multi-function device
  • Fast input frequency up to 60 kHz allows for high speed counting and measuring applications
  • Up to 3 Presets for precision control (1 as absolute or trail preset, range or limit value; 2 with relay output)
  • Times programmable up to 10 minutes for a variety of application requirements
  • Prescaler adjustable from 0.0001 to 99.9999 for industry leading precision
  • Fast installation and replacement with plug-in terminals
  • View two separate outputs at the same time with large two-line, easy to read display