Showing 731–740 of 962 results

Superior Electric DIN1 Plus – Transient Voltage Surge Suppressors

  • 10 or 20 kA Surge Amp Capacity Protection per mode for DC use
  • 20 or 40kA Surge Amp Capacity Protection per phase for AC use
  • 15A and 30A models – Maximum Continuous Operating Current
  • 1Ø, 2-Wire plus Ground, 24, 48, 120 and 250 Volt Models
  • Ultra Compact, Fail-safe Design
  • Dual Component-Level Fusing
  • High-frequency Noise Filtering
  • Hard-wired via Box Terminals
  • LED Visual Protection Status
  • 10-Year Warranty
  • UL and cUL Recognized

Superior Electric WHR – STABILINE Automatic Voltage Regulator

Superior Electric offers an extensive line of voltage regulators as part of their WHR Series. WHR Series STABILINE® Automatic Voltage Regulators maintain constant voltage to your equipment, even when the input voltage and system load vary widely.

Texmate BL-40 Leopard Series – Digital Relay Meters

  • 96x24mm
  • 4 Digit Display
  • Range: -1999 to 9999
  • Three-button programming from the front panel
  • Three front panel selectable ranges
  • Four-level brightness control of digital display, and setpoint LEDs
  • Three programmable setpoints
  • Relay activation can be selected to occur above (HI) or below (LO) each setpoint
  • Hysteresis setting for all three setpoints. Delay on make and delay on break for SP1 and SP2
  • Peak and Valley. View and Reset
  • Auto-sensing AC/DC Power Supply. For Voltages Between 85-265VAC/95-300VAC (PS1) or 15-48VAC/10-72VDC
  • One 9 amp form C and one 4 amp form A relay, or up to three 4 amp form A relays are available

Texmate BL-B51D40 Leopard Series – Bargraph Meters

  • 96x24mm
  • Range: -1999 to 9999
  • 4 Digit LED display
  • 51 segment bargraph
  • Bargraph center zero function.
  • Four programmable setpoints.
  • Setpoint 1 has delay-on-make and delay-on-break plus a special “pump on pump off” mode that creates a Hysteresis Band between SP1 and SP2.
  • Relay activation can selected to occur above or below (Lo) each setpoint.
  • Digital display blanking.
  • Decimal point setting.
  • Four-level brightness control of the bargraph digital display.

Texmate BN Series – Compact Digital Meter

  • 96x24mm
  • 3 1/2 or 4 1/2 Digit display
  • Slim case
  • Pin for pin functional replacement for the Newport model 215
  • Short depth case – just 2.83 inches (72mm) behind the panel.
  • Four user-selectable ranges of 200mV, 2V, 20V and 200V

Texmate BX-35 Lynx Series – Modular Digital Meters

  • 96×24 mm
  • 3 1/2 Digit , 0.56”Red, Green or Super Bright Red (optn).
  • Range: -1999 to 1999 counts.
  • Modular input cards
  • Versatile low cost indicator

Texmate BX-45 Lynx Series – Modular Digital Meters

  • 96×24 mm
  • 4 1/2 Digit , 0.56”Red, Green or Super Bright Red (optn).
  • Range: -19999 to 19999 counts.
  • Modular input cards
  • 16 bit dual slope
  • Versatile low cost indicator

Texmate BX-B31 Lynx Series – Bargraph Meter

  • 96x24mm
  • 31 segment AC/DC powered modular compact bargraph.
  • Red (std), green (optional) or amber (optional) colors.
  • 1 or 2 setpoints
  • 1 or 2 relays
  • Vertical or horizontal formats.

Texmate CM Series – Slim Bezel Loop Powered Meters

  • 69.68×29.72mm
  • Loop-powered Panel Meter
  • 3 1/2 Digit 0.48″ LCD
  • Slim Bezel Case
  • 4-20 mA Process Meter

Texmate DI-503E & DI-503T Tiger Series – Programmable Meter Controller

  • 96x48mm
  • 5 Digit x3 Display Controllers
  • 3 displays with red, green, or superbright red 7-segment, 0.31” high LEDs
  • Range: -19999 to 99999 counts
  • Modular construction
  • Front panel controls
  • Up to 4 “smart” input channels