Shop
ITECH IT2705 – Modular DC Power Analyzer
The IT2705 is a compact, modular DC power analysis platform designed for dynamic power consumption measurement, battery simulation, and power characteristic testing in R&D. It integrates a DC power supply, electronic load, and arbitrary waveform generator with an intuitive GUI, supporting oscilloscope sampling and data logging—eliminating the need for secondary development. With support for up to 8 channels and a power range of 20W to 500W, it accommodates various modules including DC power, bidirectional power supply, regenerative load, and SMU. Ideal for testing IoT devices, chips, automotive electronics, and wearables, the IT2705 enables accurate analysis of dynamic waveforms and key electrical characteristics.
ITECH IT2800 Series – Graphical Source Measure Unit
The IT2800 Series are compact and cost-effective bench-top Source Measure Units (SMUs) with the capability to source and measure both voltage and current. The IT2800 Series combine the capabilities of a voltage source, a current source, a voltage meter, a current meter and an ohmmeter (along with the capability to switch easily between these various functions). With a current range of 10fA to 10A and a voltage range of 100nV to 1000V, the IT2800 series SMU has capabilities that allow it to perform more than just simple DC and pulsed measurements to prevent errors in measurement results due to the device’s own heating.
ITECH IT6600C – Bidirectional Programmable DC Power Supply
The IT6600C series features a new touch screen design and intuitive interface, enhancing operational convenience. Its 3U chassis houses dual channels with 21kW power density each, capable of independent or parallel/series operation for up to 42kW output. This single unit surpasses 3 to 5 rival products, serving various high voltage/current applications.
Additionally, it acts as a load balancer, converting excess power into clean energy for efficient recycling. As a versatile, user-friendly, energy-efficient, bidirectional programmable DC power source, it transforms high-power applications in automotive, energy storage, industrial, and renewable energy sectors. It offers a novel platform for research, development, and robust support in production.
-
Voltage：1200 V
-
Current：200-1800A
-
Power：42kW-378kW
ITECH IT6600D – High Power Programmable DC Power Supply
The IT6600D series pioneers a new era of graphical programmable DC power supplies. Integrating touch screen design and an intuitive graphical interface, it simplifies parameter setting and waveform editing while enhancing user convenience. Utilizing advanced third-generation SiC technology, it achieves impressive 21kW power density per channel within a compact 3U chassis. By enabling series and parallel connections, the dual channels can deliver a combined output of up to 42kW, surpassing the capabilities of multiple competing units. With CC/CV priority features, users can tailor the output mode to suit specific testing needs, enhancing precision in measurements. With high precision, speed, and a range of standard communication interfaces, it streamlines test development and finds extensive applications in laboratories, production lines, and automated test systems.
-
Voltage：1200 V
-
Current：200-1800A
-
Power：42kW-378kW
Siglent SAP4000P Power Rail Probe
- Bandwidth 4 GHz
- Low frequency resistance 20 kΩ
- High frequency resistance 50 Ω
- Offset voltage range ±24 V
- Attenuation ratio 1.1:1
- Dynamic range ±600 mV
Siglent SAP5000D High Bandwidth Differential Active Probe
- Bandwidth: DC to over 5 GHz
- Single-ended input resistance: 10 kΩ
- Differential input resistance: 20 kΩ
- Gain: ÷10
- Differential input capacitance: 400 fF
- Input dynamic range: ±2.5 V
- Offset voltage setting range: ±12 V
- SAPBus interface for power and communication
Siglent SDG1000X – Arbitrary Waveform Generator
- Dual-channel design with bandwidth up to 60 MHz and amplitude up to 20 Vpp
- 150 MSa/s sampling rate, 14-bit vertical resolution, and 16 kpts waveform length
- Innovative EasyPulse technology reduces jitter in Pulse waveforms, offering wide range and extremely high precision in pulse width and rise/fall times adjustment
- Innovative TrueArb technology supports user-defined waveforms from 2 to 16 kpts and user-defined sample rate from 1 μSa/s to 30 MSa/s
Siglent SDG2000X – Arbitrary Waveform Generator
- Dual-channel design with a maximum bandwidth of 120 MHz
- Achieves a maximum output amplitude of 20 Vpp, ensuring high fidelity output with an 80 dB dynamic range
- Features a high-performance sampling system with a 1.2 GSa/s sampling rate and 16-bit vertical resolution, preserving waveform details
- Innovative TrueArb technology supports user-defined waveforms from 8 to 8 Mpts and user-defined sample rates from 1 μSa/s to 75 MSa/s
- Equipped with a large Touch Screen Display for convenient operation
- Enables easy combination of waveforms through a single output, including noise and arbitrary waveforms
Siglent SDG3000X – Arbitrary Waveform Generator
- Maximum output amplitude 20 Vpp
- Rich analog and digital modulation functions: AM, DSB-SC, FM, PM, FSK, ASK, PSK and PWM
- Sweep and Burst functions
- Harmonic function
- Waveform Combining function
- 196 built-in arbitrary waveforms
- Built-in WebServer supports instrument control via web browser
- 7-inch display touch screen
Siglent SDG6000X – Arbitrary Waveform Generator
- Dual-Channel design with a maximum bandwidth of 500 MHz
- Achieves a maximum output amplitude of 20 Vpp, ensuring high fidelity output with an 80 dB dynamic range
- Features a high-performance sampling system with a sampling rate of 2.4 GSa/s and 16-bit vertical resolution
- Incorporates EasyPulse circuitry to reduce jitter and enhance pulsed performance
- Optional capability to generate baseband and IF IQ modulated waveforms
