Shop
Siglent SSA5000A – Spectrum Analyzer
- Frequency Range from 9 kHz up to 13.6 /26.5 GHz
- -165 dBm/Hz Displayed Average Noise Level (Typ.)
- -105 dBc/Hz@1 GHz,10 kHz offset SSB Phase Noise (Typ.)
- 25 MHz/40 MHz Realtime Spectrum Analysis Bandwidth
- Analog Modulation Analysis and Vector Digital Modulation Analysis
- Channel power, ACPR, OBW, Harmonics, and TOI measurement option
- Web Browser for easy Remote Control over LAN
Siglent SSG3000X – RF Signal Generator
- Frequency ranging from 2.1 GHz to 3.2 GHz
- Peak output level reaching up to +20 dBm on average
- Output level spanning from -110 dBm to +13 dBm
- Precise level accuracy of ≤0.7 dB on average
- Support for standard AM, FM, PM, and pulse modulation
- Option for Pulse Train Generator included
Siglent SSG5000A – RF Signal Generator
- Frequency range extends up to 13.6 GHz / 20 GHz
- Offers a frequency setting resolution of 0.001 Hz
- Level setting range spans from -130 dBm to 25 dBm
- Typical Phase Noise is -120 dBc/Hz @ 1 GHz, 20 kHz offset
- Typical Level error is ≤ 0.7 dB
- Supports standard AM, FM, PM, and pulse modulation
- Option for single pulse, double pulse, and pulse train generator available
Siglent SSG5000X – RF Signal Generator
- Frequency up to 4 GHz/6 GHz
- 0.001 Hz frequency setting resolution
- Maximum output power up to +26 dBm (typ.)
- Phase Noise: -120 dBc/ Hz @ 1 GHz, 20 kHz offset (typ.)
- Single pulse, double pulse and pulse train generator (option)
Siglent SSG6000A – Microwave Analog Signal Generator
- Advanced DDS technology, 125 MSa/s sampling rate, 14-bit vertical resolution
- Single channel output, 5 standard waveforms, 46 built-in arbitrary waveforms (including DC)
- Complete modulation functions: AM, DSB-AM, FM, PM, FSK, ASK, PWM, linear/logarithmic sweep, and burst
Siglent SSU5000A Mechanical Switch
- Maximum frequency: 18 GHz / 26.5 GHz / 50 GHz
- Configurations: 1 to 4 SPDT switches or 1 to 2 SP6T switch configurations
- SCPI Controllable via VISA and EasySSU software
- USB Connectivity
- Size: W×H×D=153×62.4×137.5mm
- RF connector: SMA female or 2.4mm female
Siglent SSU5000A Switch Matrix
- Maximum Frequency Options: 9 GHz / 26.5 GHz
- Maximum Number of Input Ports: 4
- Maximum Number of Output Ports: 24
- RF Connector: 3.5mm female
- Supports a simplified multi-port calibration algorithm
- Interface Options: LAN, USB Device, Direct Control (in), Direct Control (out)
Siglent SVA1000X – Spectrum & Vector Analyzer
- Vector Network Analysis: Now included as standard, covering frequencies from 100 kHz to 3.2 / 7.5 GHz
- Distance-to-fault: Optional feature
- Spectrum Analyzer mode: Frequency range extends from 9 kHz to 1.5 / 3.2 / 7.5 GHz
- Displayed Average Noise Level (Typ.): -156 dBm/Hz / -161 dBm/Hz / -165 dBm/Hz
- Offset Phase Noise (Typ.): -99 dBc/Hz @10 kHz Offset (1 GHz)
- Minimum Resolution Bandwidth (RBW): 1 Hz
Eagle Signal A103 – Time Totalizer
The A103 Elapsed Time Indicators provide a range of capabilities unequaled in products of similar size and cost. A single model can be programmed to display in seconds, minutes, hours, or hours: minutes: seconds. The A103 series also includes matching indicators for count totalization and rate metering, as well as models with a preset output for control by count or time.
Eagle Signal BRE – Reset Timer
The BRE Series enclosed construction with front facing dial and knob. The BRE Series timer has a heavy duty terminal block, with 9 screw terminals that will readily accept 16 gauge wire commonly used in industrial circuit wiring.