Shop
Yokogawa CA500 – Multi-Function Process Calibrator
- Sources and measures DC voltage, DC current, RTD, TC, resistance, frequency and pulse signals
- Corresponds to 17 types of TC standard (JIS/IEC/DIN/ASTM/GOST R)
- Corresponds to 14 types of RTD standard (JIS/IEC/GOST R)
- Linear sweep function: Continuously Source from 0% to 100%
- Step sweep function: Change output in a staircase (step) pattern by specifying the number of steps. (The number of steps can be set from 2 to 20)
- Program sweep function: Users can set the desired output value (%) and number of steps. (10 steps for CA500, 20 steps for CA550)
Yokogawa CA700 – Precision Pressure Calibrator
- High Accuracy and Long Stability:Â Achieves the highest accuracy in the portable class
- Basic accuracy:Â Pressure (measurement) / 0.01% rdg. Current/voltage (source/measurement) / 0.015% rdg
- Rangeability – Achieves the highest resolution and widest range in the portable class
- User Support – Strong support for field calibration and maintenance work
- Calibration procedures of pressure transmitters and pressure switches are embedded
- IP54 dustproof and waterproof robust case enables use in harsh environments
- Three high-performance hand pump models for different pressure ranges are available
Yokogawa CA71 – Multifunction Calibrator
- Source and measure operations can be performed at the same time
(Select from the following source signal and measurement signal options: voltage, current, resistance, thermocouple (TC), resistance temperature detector (RTD),frequency, pulse) - AC voltages, including supply voltage, can be measured
- Divided output (n/m) function, Auto-step function, Sweep function, Memory function and Communication function are available
- 20 mA SINK Function
- 4−20 mA Step Function
- Equivalent Output of TC/RTD and Built-in Reference Junction Compensation Sensor
- Generation and Measurement of Pulse Generation and Measurement of Voltage Pulse and Contact Pulse
- Pulse Cycle Function
- CPM (count/min), CPH (count/hour) Function
- Memory Function: can handle a maximum of 50 sets of data by means of its built-in memory
Yokogawa CL120 – Mini Clamp-on Testers
- 3 1/2 digit LCD display
- 20A range: 2.0%+7dgt (50 to 1kHz) accuracy
- 200A range: 3.0%+10dgt (40 to 1kHz) accuracy
- Exclusive model for AC current measurement with current ranges up to 200AAC
- Lightweight and compact design
- Measures conductors up to 24mm in diameter
- Data Hold function
- Mean value display
- Approved for conformity to safety standards EN61010-1,EN61010-2-032 (CAT. III 300 V)
Yokogawa CL150 – Clamp-on Testers
- AC current measurement with current ranges up to 2000A
- AC/DC voltage and resistance measurements
- 54mm in diameter of measurable conductor
- Mean value display
- DC output function
- Data hold function
- Sleep function
- Approved for conformity to safety standards EN61010-1,
- EN61010-2-031, EN61010-2-032 (CAT. m 600 V, CAT. II1000 V)
Yokogawa CL155 – Clamp-on Testers
- AC current measurement with current ranges up to 2000A
- AC/DC voltage and resistance measurements
- True RMS display
- 54mm in diameter of measurable conductor
- DC output function
- Data hold function
- Sleep function
- Approved for conformity to safety standards EN61010-1, EN61010-2-031, EN61010-2-032 (CAT. HI 600 V, CAT. II1000 V)
Yokogawa CL220 – Clamp-on Testers
- AC/DC current measurements with current ranges up to 300A
- 24mm in diameter of measurable conductor
- Light weight & compact design
- Mean value display
- Sleep function
- Approved for conformity to safety standards EN61010-1, EN61010-2-032 (CAT. III 300 V)
Yokogawa CL235 – Clamp-on Testers
- True RMS display
- AC/DC current measurements with current ranges up to 600A for
- AC and 1000A for DC
- AC/DC voltage, resistance and frequency measurements 33mm in diameter of measurable conductor
- Sleep function
- Data hold function
- Approved for conformity to safety standards EN61010-1,EN61010-2-031, EN61010-2-032 (CAT. III 600 V)
Yokogawa CL250 – Clamp-on Testers
- AC/DC current measurements with current ranges up to 2000A
- AC/DC voltage and resistance measurements
- DC output
- 55mm in diameter of measurable conductor
- Mean value display
- Sleep function
- Data hold function
- Approved for conformity to safety standards EN61010-1, EN61010-2-031, EN61010-2-032 (CAT. III 600 V, CAT. II 1000 V)
Yokogawa CL255 – Clamp-on Testers
- True RMS display
- AC/DC current measurements with current ranges up to 2000A
- AC/DC voltage and resistance measurements
- DC output
- 55mm in diameter of measurable conductor
- Sleep function
- Data hold function
- Approved for conformity to safety standards EN61010-1,EN61010-2-031, EN61010-2-032 (CAT. III 600 V, CAT. II 1000 V)
Yokogawa CL320 – Clamp-on Testers
- Leakage current measurement with current range from 20mA to 200A
- Light weight and compact design
- Manual range switching and auto power-off functions
- 24mm in diameter of measurable conductor
- Mean value display
- Auto power-off
- Manual range switching
- Approved for conformity to safety standards EN61010-1, EN61010-2-032(CAT. III 300 V)
Yokogawa CL340 – Clamp-on Testers
- Leakage current measurement with current range from 40mA to 400A
- Light weight and compact design
- Manual range switching and auto power-off functions
- 40mm in diameter of measurable conductor
- Mean value display
- Auto power-off
- Manual range switching
- Approved for conformity to safety standards EN61010-1, EN61010-2-032(CAT. III 300 V)
Yokogawa CL345 – Clamp-on Testers
- Leakage current measurement with current range from 40mA to 400A
- Manual range switching and auto power-off functions
- 40mm in diameter of measurable conductor
- True RMS display
- Auto power-off
- Manual range switching
- Approved for conformity to safety standards EN61010-2-032 (CAT. III 300 V)
Yokogawa CL360 – Clamp-on Testers
- Leakage current measurement with current range from 200mA to 1000A
- AC and DC output
- 68mm in diameter of measurable conductor
- Approved for conformity to safety standards EN 61010-1, EN 61010-2-032 (CAT III 300 V)
Yokogawa CW10 – Clamp-on Power Meter
- AC / DC Power up to 600 kW, AC / DC Voltage max. 1000 V, AC / DC Current max. 600 A
- True RMS for AC
- Harmonics 1st to 25th order
- Power fluctuation using the ACA Inrush and Peak hold functions
- Frequency, Resistance, Continuity, Diode check, Power factor
- Up to 9999 counts, approx. 37mm max. diameter of measurable conductor (the jaw opens approx. 45mm max.)
- CATIV 600V and CATIII 1000V compliant for safety
- Backlight on the display area turns on and a white LED automatically illuminates the front of jaw when clamping
- Non-contact Voltage Detection (Red LED lights up on detection)
- Easy Operation with the Navigator key
- Low Pass Filter, Phase Detection, AC / DC Auto Sense
Yokogawa CL420 – Clamp-on Process Meter
- 0.2% Accuracy, 0.01mA Resolution
- Dual Display
- LED Torch Light, Backlight Display
- Analog Output Available