Shop
Dylix ST Series – Submersible Pressure Transmitters
- High Stability Depth/Level Transmitter
- 0-1 through 0-1000 psi
- Moisture Free/Maintenance Free Vent Filter
- EMI/RFI filtering with lightning protection
- Standard accuracy ± 0.5% FSO
- Double sealed cable exit
Dylix STD Series – Submersible Pressure Transmitters
- 0-1 through 0-1000 psi
- High stability small bore depth/level transmitter
- Moisture Free/Maintenance Free Vent Filter
- EMI/RFI filtering with lightning protection
- Standard accuracy ± 0.5% FSO (optional + /-0.1% FSO)
- Double sealed cable exit
- 0.75” Diameter (optional 0.69”)
- Maintenance Free
Eagle Signal B506 Series – Repeat Cycle Programmable Timer
- Three different base models: standard, high performance, and repeat cycle
- Four digit dual line LED display indicates set value and time value
- All models offer multiple field programmable modes of operation and time ranges
- Multiple levels of security prevent unauthorized set value or parameter changes
- IP65 rated for use in washdown conditions
- Universal AC supply voltage (90-240 VAC) or 24 VAC/VDC models
- Front panel programming with an intuitive button-per-digit interface
- 5 amp relay output or NPN transistor
- Industry standard 11 pin socket connection
- Wide range of unique features for each model
Eagle Signal B856 Series – Multi-Function Timer
- Button-per-digit preset entry simplifies setup and operation
- High Contrast dual line LCD display indicates both Process Time and Preset Value
- Field selectable for operation in On-Delay, Off-Delay, Interval 1, Interval 2, or Repeat Cycle modes
- Universal Power Supply accepts 24 – 240 VAC or 24 VDC
- Designed to meet IEC 801 level 4 noise immunity standards for increased reliability
- Unique On-Delay/Interval mode lets one unit do the work of two in many applications
- Industry standard socket connection
- Programmable security levels prevent unauthorized setpoint or program changes
- UL, CUL recognized, CE compliant
- IEC IP65 rated front panel for use in washdown environments
Eagle Signal B866 Series – Multi-Function Analog Timer
- Field selectable for operation in On-Delay, Off-Delay*, Interval, or Repeat Cycle modes
- Universal power supply accepts 24 – 240 VAC or 24 VDC
- Meets IEC 801 level 4 noise immunity standards
- Unique On-Delay/Interval model lets one unit do the work of two in many applications
- Industry standard socket connection
- Front panel or DIN rail mounting
- Flexible start and reset input signals
- UL, CUL recognized, CE compliant
- IP54 rated front panel – ideal for harsh environments
Eagle Signal CX200 & CX300 Series – Flex Timer Counter
- Five time ranges from 19.999 sec. to 199 hrs.: 59 min.
- Two count rates – accept and display counts from 1 to 19999
- Two relay outputs – socket mounted for easy replacement
- Two form C instantaneous contacts and two form C programmed contacts
- N.O. solid state MOSFET, delayed action switch rated at 1 ampere continuous load current, 0-264 VAC 50/60 Hz or DC
- Ideal output for switching low level signals and high voltage loads due to MOSFET output’s ON resistance of 0.5 ohm and very low OFF leakage
- Programmed outputs operate in one of four load sequences; OOX, OXO, OOX with pulse output, and OOX pulse output with repeat cycle operation
- Standard start is defined as ON delay reset timer or counter
- For standard start units, timer/counter resets on power failure
- Reverse start or OFF delay units will not reset on power failure and will continue cycle when power is restored
- Non-volatile memory data retention
Eagle Signal HP5 Series – Cycle Flex Reset Timer
- 16 standard time ranges from 5 seconds to 60 hours
- Knob adjustable time ranges – progress pointer for each
- Highly visible, calibrated dials (7.85 inch circumference)
- Easily read and well-spaced calibrations
- Red progress pointer displays remaining time interval
- Pilot light indicates when timer motor is energized
- Standard timers supplied with “power on” clutch operation
- Optional reverse action clutch will not reset on power failure
- 15 terminal ABS (UL rated 94V-0) molded housing has high impact resistance and will not support combustion
Eagle Signal HQ4 Series – Percentage Timer
- Panel Mount
- Settings may be made or set during timer operation
- Designed for applications where ON time of a fixed cycle needs to be variable.
- UL/CUL Recognition E61735
Eagle Signal HQ9 Series – Percentage Timer
- Panel Mount
- Electrically isolated pilot light
- Cycle progress pointer
- Compatible with CYCL-FLEX® series featuring unique plug-in mounting
- UL Recognition E61735 CSA Certification LR26861
Eagle Signal MAX Count Series – 16 Preset Advanced Counters
- Simultaneous Counter, Totalizer, and Batching
- “ON THE FLY” Preset Programming
- A-B, A+B and Quadrature operation
- Sixteen Preset, Six Decade Main Counter
- Single Preset, Six Decade Batch Counter
- Six Decade Background Totalizer
- 4 Wire / 2 Wire RS-485 Provides LOCAL & REMOTE process Control Capability with Modbus RTU protocol
- Six Decade Start Count Preset
- Counter Reset, Stop / Hold / (*Step Back) Inputs
