Showing 211–220 of 953 results

Conax EGT Series – Power Compression Seal Feedthrough

  • Electrode Teflon Sealing Gland
  • Seals 1 Electrode or Element
  • For Gas or Non-Conductive Liquid
  • Stainless Steel Reusable Fitting

Conax FCA Series – Fiber Cable Assembly

  • Transmission Loss: Less than 0.3db typical (not including connectors).
  • Temperature Rating: -4°F to +185°F (-20°C to +85°C). Higher temperature models are available in some configurations. Please consult factory.

Conax FSA Series – Fiber Optic Feedthrough

  • Helium Leak Rate: 1 x 10-6 scc/sec typical
  • Transmission Loss: Less than 0.3db typical (not including connectors)
  • Pressure Rating: 1000 PSIg (70 bar) standard, up to 3000 (207 bar) PSIg optional
  • Temperature Rating: -4°F to +185°F (-20°C to +85°C). Higher temperature models are available in some configurations. Please consult factory.

Conax HEGPK Series – Power Compressions Seal Feedthrough

  • Seals one electrode, conductor or element
  • Temperature Range: Vacuum to 7,700 PSIg (531 bar)
  • Voltage 8000 VDC
  • Amperage to 200 amps
  • Supplied with or without conductor

Conax HPEG Series – Power Compression Seal Feedthrough

  • Each unit has a stepped electrode. Larger diameter of electrode is on the body side.
  • Electrode is copper (CU), stainless steel (SS) and nickel (NI)
  • Voltage rating 2000VDC
  • Body material is 316SS, ASTM 479
  • SST nuts and washers for NI and SS, brass for CU
  • All prices include a pressure test at 68°F

Yokogawa DLM3000HD Series – Mixed Signal Oscilloscopes

  • 350-500 MHz bandwidth
  • 12 bit Vertical Axis Resolution
  • 16 bit High Resolution Mode
  • 4 analog channels, 8 bits of logic. Up to 8 channels while connecting 2 units for synchronous measurement.
  • 2.5 GS/s Sample Rate
  • 1 G points measurement memory
  • 8.4″ touchscreen display

Yokogawa DLM5000HD Series – Mixed Signal Oscilloscopes

  • < 500 MHz bandwidth
  • 12 bit Vertical Axis Resolution
  • < 16 bit High Resolution Mode
  • 4-8 analog channels, 32 bits of logic. Up to 16 channels while connecting 2 units for synchronous measurement.
  • < 2.5 GS/s (8 channels at the same time)
  • < 1 G points measurement memory
  • 12.1″ touchscreen display

Conax MK Series – Metal Ferrule Compression Seal Fittings

  • Metal to Metal Seal
  • Seals 1 Element
  • For Gas or Liquid
  • Stainless Steel Throughout

Conax PL Series – Multi-Wire Power Compression Seal Feedthrough

  • Stainless Steel Fitting
  • For Gas or Liquid
  • Easy Installation -No “Potting”
  • Seals 1 to 12 Wires
  • Pressure: Vacuum to 10,000 PSI (690 bar)
  • Rated: 600 Volts to 55 Amps