Showing 1–10 of 13 results

Conax SPG/DSPG Series – Multi-hole Split Compression Seal Fitting

  • SPG Seals 1 To 11 Elements DSPG Seals Up to 17 Elements
  • For Gas or Liquid
  • Stainless Steel Fitting
  • Soft Sealant

Conax SPGA/DSPGA Series – Multi-hole Split Compression Seal Fitting

Conax now offers split seal fittings with pressure ratings that are higher than typical ratings achieved with our legacy SPG and DSPG multi-hole split compression seal fittings

  • Seals up to 12 Elements
  • Multi-hole split seal fittings that carry both hydraulic and pneumatic catalog pressure ratings
  • For liquid and gas

Conax HL Series – Hazardous Location Conduit Seal

  • Stainless Steel Fitting
  • For Gas or Liquid
  • Easy Installation -No “Potting”
  • Seals 1 to 12 Wires
  • Pressure: Vacuum to 10,000 PSI (690 bar)
  • Rated: 600 Volts to 55 Amps

Conax HD Series – High Density Feedthrough Assemblies

  • Sheath Material: 300 Series SST, 4.5″ nominal length
  • Temperature Range: -112°F to +250°F (-80°C to +120°C)
  • Vacuum Rating: 5 x 10-6 mm HG @ 68°F (20°C)
  • Leak Rate: 1 x 10-9 scc/sec He @ 68°F (20°C), 1 atm. applied
  • Voltage Rating: 100 VDC
  • Amperage Rating: 500mA
  • Feedthrough Pressure Rating @ 68°F (20°C): 5000 psi (345 bar)

Conax TG/MTG Series – Instrumentation Wire Compression Seal Feedthrough

  • Pressure/Vacuum Compression Seal
  • Stainless Steel Reusable Fitting
  • Soft Sealant
  • Wires Easily Assembled or Replaced In Field
  • Temperature Range From -300°F to +1600°F (-185°C to +870°C)
  • Pressure: Vacuum to 10,000 PSI (690 bar)
  • Seals 1 to 16 Elements

Conax BSWS Series – Bearing Sensor Wire Compression Seal Feedthrough

  • Stainless Steel Fitting
  • For Bearing Oil Sealing
  • Easy Installation – No “Potting”
  • Seals 2 to 14 Wires
  • Pressure: to 50 PSI (3.4 bar)
  • Temperature Range: Ambient to 100°F (37.8°C)
  • Field Adjustable
  • Reusable Fitting

Conax TGM/MTGM Series – High Temperature Wire Compression Seal Feedthrough

TG assemblies with high-temperature fiberglass-insulated thermocouple wire are specially designed for applications where the sensor wire is exposed to process temperatures reaching up to 1400°F (760°C). This assembly is particularly targeted for use with vacuum and/or inert gas back-filled furnaces with vessel wall temperatures up to 200°F (93.3°C) and pressures not exceeding 300 psi.

Conax TGF/MTGF Series – High Temperature Wire Compression Seal Feedthrough

TG assemblies with fiberglass-insulated thermocouple wire are specially designed for applications where the sensor wire is exposed to process temperatures reaching up to 900°F (482°C). This assembly is particularly targeted for use with vacuum and/or inert gas back-filled furnaces with vessel wall temperatures up to 200°F (93.3°C) and pressures not exceeding 300 psi.