Showing all 13 results

Conax SPG/DSPG Series – Multi-hole Split Compression Seal Fitting

  • SPG Seals 1 To 11 Elements DSPG Seals Up to 17 Elements
  • For Gas or Liquid
  • Stainless Steel Fitting
  • Soft Sealant

Conax SPGA/DSPGA Series – Multi-hole Split Compression Seal Fitting

Conax now offers split seal fittings with pressure ratings that are higher than typical ratings achieved with our legacy SPG and DSPG multi-hole split compression seal fittings

  • Seals up to 12 Elements
  • Multi-hole split seal fittings that carry both hydraulic and pneumatic catalog pressure ratings
  • For liquid and gas

Conax HL Series – Hazardous Location Conduit Seal

  • Stainless Steel Fitting
  • For Gas or Liquid
  • Easy Installation -No “Potting”
  • Seals 1 to 12 Wires
  • Pressure: Vacuum to 10,000 PSI (690 bar)
  • Rated: 600 Volts to 55 Amps

Conax HD Series – High Density Feedthrough Assemblies

  • Sheath Material: 300 Series SST, 4.5″ nominal length
  • Temperature Range: -112°F to +250°F (-80°C to +120°C)
  • Vacuum Rating: 5 x 10-6 mm HG @ 68°F (20°C)
  • Leak Rate: 1 x 10-9 scc/sec He @ 68°F (20°C), 1 atm. applied
  • Voltage Rating: 100 VDC
  • Amperage Rating: 500mA
  • Feedthrough Pressure Rating @ 68°F (20°C): 5000 psi (345 bar)

Conax TG/MTG Series – Instrumentation Wire Compression Seal Feedthrough

  • Pressure/Vacuum Compression Seal
  • Stainless Steel Reusable Fitting
  • Soft Sealant
  • Wires Easily Assembled or Replaced In Field
  • Temperature Range From -300°F to +1600°F (-185°C to +870°C)
  • Pressure: Vacuum to 10,000 PSI (690 bar)
  • Seals 1 to 16 Elements

Conax BSWS Series – Bearing Sensor Wire Compression Seal Feedthrough

  • Stainless Steel Fitting
  • For Bearing Oil Sealing
  • Easy Installation – No “Potting”
  • Seals 2 to 14 Wires
  • Pressure: to 50 PSI (3.4 bar)
  • Temperature Range: Ambient to 100°F (37.8°C)
  • Field Adjustable
  • Reusable Fitting

Conax TGM/MTGM Series – High Temperature Wire Compression Seal Feedthrough

TG assemblies with high-temperature fiberglass-insulated thermocouple wire are specially designed for applications where the sensor wire is exposed to process temperatures reaching up to 1400°F (760°C). This assembly is particularly targeted for use with vacuum and/or inert gas back-filled furnaces with vessel wall temperatures up to 200°F (93.3°C) and pressures not exceeding 300 psi.

Conax TGF/MTGF Series – High Temperature Wire Compression Seal Feedthrough

TG assemblies with fiberglass-insulated thermocouple wire are specially designed for applications where the sensor wire is exposed to process temperatures reaching up to 900°F (482°C). This assembly is particularly targeted for use with vacuum and/or inert gas back-filled furnaces with vessel wall temperatures up to 200°F (93.3°C) and pressures not exceeding 300 psi.

Conax TG-24/MTG-24 Series – Instrumentation Wire Compression Seal Feedthrough

This assembly consists of a Conax Technologies manufactured TG Feedthrough provided with a sealant and 24 AWG solid insulated thermocouple grade wires or copper wires. The feedthrough is furnished with 24″ of wire on each side. Longer wire lengths can be furnished as required.

Conax PL Series – Multi-Wire Power Compression Seal Feedthrough

  • Stainless Steel Fitting
  • For Gas or Liquid
  • Easy Installation -No “Potting”
  • Seals 1 to 12 Wires
  • Pressure: Vacuum to 10,000 PSI (690 bar)
  • Rated: 600 Volts to 55 Amps