Yokogawa
Yokogawa CL360 – Clamp-on Testers
- Leakage current measurement with current range from 200mA to 1000A
- AC and DC output
- 68mm in diameter of measurable conductor
- Approved for conformity to safety standards EN 61010-1, EN 61010-2-032 (CAT III 300 V)
Yokogawa CW10 – Clamp-on Power Meter
- AC / DC Power up to 600 kW, AC / DC Voltage max. 1000 V, AC / DC Current max. 600 A
- True RMS for AC
- Harmonics 1st to 25th order
- Power fluctuation using the ACA Inrush and Peak hold functions
- Frequency, Resistance, Continuity, Diode check, Power factor
- Up to 9999 counts, approx. 37mm max. diameter of measurable conductor (the jaw opens approx. 45mm max.)
- CATIV 600V and CATIII 1000V compliant for safety
- Backlight on the display area turns on and a white LED automatically illuminates the front of jaw when clamping
- Non-contact Voltage Detection (Red LED lights up on detection)
- Easy Operation with the Navigator key
- Low Pass Filter, Phase Detection, AC / DC Auto Sense
Yokogawa CL420 – Clamp-on Process Meter
- 0.2% Accuracy, 0.01mA Resolution
- Dual Display
- LED Torch Light, Backlight Display
- Analog Output Available
Yokogawa EY200 – Digital Earth Tester
- Designed to safety standard IEC 61557
- Reference to IEC 60529: Degrees of protection provided by enclosures (IP54). Measurement can be made even under adverse weather conditions
- Large, easy-to-read LCD digital display 1999-count digital reading
- 2P Test leads (for simplified measurement) has a structure that both the safety alligator clip and the test probe are available
- Warns when earth resistance of auxiliary earth spikes exceeds the permissible limit
- Convenient carrying soft bag for accessories etc.
- 3-Pole Earth Resistance Measurement (Precise Measurement)
- Earth Resistance: 2000Ω LSD: 0.01 to 1Ω Earth Voltage: 200V
Yokogawa FG400 – Isolated Arbitrary/ Function Generator
- High accuracy ±(0.05% of full scale)
- Excellent stability provided by silicon resonant sensor
- Low temperature coefficient
- Zero point: ±0.003% of full scale/°C Span: ±0.002% of full scale/°C
- Divided output function with as many as 20 steps
- Autostep output function
- Sweep output function
- Offset monitor function to present deviation from final value
Yokogawa GS200 – DC Voltage / Current Source
- Source and sink operation up to 110 V/3.2 A (four-quadrant operation)
- Basic accuracy: ±0.02% (DC voltage generation)
- Sweep output at up to 100μs intervals
- Comes with abundant sweep patterns (linear, logarithmic, and arbitrary)
- Stores up to 65535 points of source measure data in the internal memory
- Easy file operation with the USB storage function
- Remote control and FTP using Web server function (Optional)
Yokogawa GS610 – Source Measure Unit
- Source and sink operation up to 110 V/3.2 A (four-quadrant operation)
- Basic accuracy: ±0.02% (DC voltage generation)
- Sweep output at up to 100μs intervals
- Comes with abundant sweep patterns (linear, logarithmic, and arbitrary)
- Stores up to 65535 points of source measure data in the internal memory
- Easy file operation with the USB storage function
- Remote control and FTP using Web server function (Optional)
Yokogawa GS820 – Multi Channel Source Measure Unit
- Isolated 2-channel source and measurement function
- Source and measurement ranges
18 V model: 7 V and 3.2 A or 18 V and 1.2 A
50 V model: 20 V and 1.2 A or 50 V and 0.6 A - 1pA resolution at extremely small current range 200 nA
- Generate arbitrary waveforms consisting of up to
100000 points at 100 µs intervals - Channel expansion through master-slave
synchronization link - Fast test speeds
Yokogawa MC100 – Pneumatic Pressure Standard
- High accuracy ±(0.05% of full scale)
- Excellent stability provided by silicon resonant sensor
- Low temperature coefficient
- Zero point: ±0.003% of full scale/°C Span: ±0.002% of full scale/°C
- Divided output function with as many as 20 steps
- Autostep output function
- Sweep output function
- Offset monitor function to present deviation from final value
Yokogawa MY600 – Digital Insulation Tester
- Featuring enhanced measurement response times of 0.5 seconds and new functionallity for PASS/FAIL Judgement and Polarization Index and Dielectirc Absoprtion Ratio testing
- Ability to log up to a 1000 data points to internal memory for offline analysis to a PC
- Automatic LED backlight when working in remote areas with low visibility
- Large voltage generation and resistance measurement ranges to suit a wide variety of insulaiton types
- Basic voltage measurement accuracy of +/- 1% of reading and resistance measurement of +/- 2% of reading with the ability to measure up to 4000 MΩ
- Power off function that minimizes idle time and conserves battery life
- Built-in auto-ranging for improved resolution at lower resistance levels
- IP40 Protection Grade for enhanced ruggedness in harsh enviornments
Yokogawa DM7560 – Digital Multimeter
- Full-color, high-resolution display with flexible display formats
- High-speed data logging with up to 30 k points per second
- High-capacity internal memory up to 100 k points
- Trend / histogram analysis available both in real-time and offline
- Multiple PC interface options (USB, Ethernet, GP-IB, RS-232) enable automation
Yokogawa TC10 – Temperature Controllers
- Compact size: 48 x 48 mm (1/16 DIN), depth of 48 mm + 14 mm (terminals)
- 3 Dynamic Colors Led Display
- Universal input: (TC, mV, V, mA, Pt100-Pt1000)
- 4 setpoints and alarm functions
- PID control, ON/OFF, Auto-tuning
- IP65 front panel (when the optional panel gasket is mounted)
- Supports serial communication – RS-485 Modbus/TCP protocol, Ethernet, open networks (CC-Link, PROFIBUS-DP, DeviceNet)
Yokogawa Tough Meter 270 Series – Analog Panel Meters
- 2.5″ to 3.5″ size
- Pivot and Jewel or Taut Band models available
- Accuracy: ±2% DC, ± 3% AC – rectifier type (60 Hz sine wave)
- Tracking: ± 1 1/2% DC; ± 2% AC ; vertical mounting
- Repeatability: ± 2% DC and AC rectifier type
- Frequency Meters Available
Yokogawa TY520 – Digital Multimeter
- High Precision
- Basic accuracy 0.09%
- True RMS measurement
- Ensured Field Site Safety
- Safety shutters preventing erroneous insertion of leads
- New Functions for Yokogawa Middle Class DMMs
- Current direct reading function by current clamp sensor (optional)
- Low-pass Filter (LPF)
- Logging-mode memory for 1600 data
- USB communication (Optional communication package)
- Closed Case Calibration
- 3-year Warranty
Yokogawa TY530 – Digital Multimeter
- High Precision
- Basic accuracy 0.09%
- True RMS measurement
- Ensured Field Site Safety
- Safety shutters for preventing erroneous insertion of test leads
- New Functions for Yokogawa Middle Class DMMs
- Current direct reading function – using clamp sensor (optional)
- Low-pass Filter (LPF)
- Logging-mode memory for 1600 data
- USB communication (Optional communication package)
- Closed Case Calibration
- 3-year Warranty
Yokogawa TY710 – Digital Multimeter
- Bandwidth: 20 kHz
- Basic accuracy 0.020%
- True RMS measurement
- New Functions for Electronic and Industrial Use
- Simultaneous measurement and display of DC and AC
- Switchable RMS/MEAN detection
- Low-pass Filter (LPF)
- AC50mV range
- Full Support for Data Management
- A large-capacity logging-mode memory (1,000 data)
- USB communication, application software
- 3-year Warranty
Yokogawa CW500 – Power Quality Analyzer
- Power line and Input Channel: 3 CH Voltage, 4 CH for Current Clamp Probe
- Capture irregularities in your power system such as voltage sags, dips, swells and log them conveniently to RAM or an SD card
- Log up to 50th orders of harmonics
- Vector display for convenient tracking of voltage/current phase relationships
- Quickly and easily shift between setting up the unit or viewing logged variables and waveforms
Yokogawa TY720 – Digital Multimeter
- Bandwidth: 100 kHz
- Basic accuracy 0.020%
- True RMS measurement
- New Functions for Electronic and Industrial Use
- Simultaneous measurement and display of DC and AC
- Switchable RMS/MEAN detection
- Low-pass Filter (LPF)
- AC50mV range
- Lo-Power resistance measurement
- Full Support for Data Management
- USB communication, application software
- A large-capacity logging-mode memory (10,000 data)
- 3-year Warranty
Yokogawa UM33A – Digital Indicator with Alarms
- Up to 9 Alarm outputs
- Input correction function (PV bias, Polygonal Line approximation, Polygonal line bias)
- A 14-segment, active (PV display color changing function) color LCD display. A five-digit, high-resolution display with alphabet capability
- Programmable function keys
- 65 mm depth The small depth enables the mounting in small panel
- Dedicated LL50A Parameter Setting Software (sold separately)
- Quick setting function Setting only the minimum necessary parameters for operation is possible
- Communications
- RS-485 (Modbus/RTU, peer to peer, coordinated, PC-Link)
- Ladder
Yokogawa UP35A – Advanced Programmable Controllers
- A 14-segment, active (PV display color changing function) color LCD display, Two five-digit, high-resolution displays are possible
- Up to 4 program patterns with 40 segments per pattern
- Maximum Analog Inputs: 1
- Maximum Analog Outputs: 2
- Maximum Digital Inputs: 8
- Maximum Digital Outputs: 8
- Maximum Control Modes: 1
- Ladder Sequence control (up to 300 steps)
- Supports serial communication – RS-485 Modbus/TCP protocol, Ethernet, open networks (CC-Link, PROFIBUS-DP, DeviceNet)
Yokogawa UP55A – Advanced Programmable Controllers
- A 14-segment, active (PV display color changing function) color LCD display, Two five-digit, high-resolution displays are possible
- Up to 30 program patterns with 99 segments per pattern
- Maximum Analog Inputs: 4
- Maximum Analog Outputs: 3
- Maximum Digital Inputs: 9
- Maximum Digital Outputs: 18
- Maximum Control Modes: 5
- Ladder Sequence control (up to 500 steps)
- Supports serial communication – RS-485 Modbus/TCP protocol, Ethernet, open networks (CC-Link, PROFIBUS-DP, DeviceNet)
Yokogawa UT32A – Advanced Application Indicating Controllers
- A 14-segment, active (PV display color changing function) color LCD display, Two five-digit, high-resolution displays are possible
- Maximum Analog Inputs: 1
- Maximum Analog Outputs: 2
- Maximum Digital Inputs: 4
- Maximum Digital Outputs: 5
- Maximum Control Modes: 1
- Ladder sequence capacity up to 300 steps
- Supports serial communication – RS-485 Modbus/TCP protocol
Yokogawa UT35A – Advanced Application Indicating Controllers
- A 14-segment, active (PV display color changing function) color LCD display, Two five-digit, high-resolution displays are possible
- Maximum Analog Inputs: 1
- Maximum Analog Outputs: 2
- Maximum Digital Inputs: 7
- Maximum Digital Outputs: 8
- Maximum Control Modes: 1
- Ladder sequence capacity up to 300 steps
- Supports serial communication – RS-485 Modbus/TCP protocol, Ethernet, open networks (CC-Link, PROFIBUS-DP, DeviceNet)
Yokogawa UT35A-L – Limit Control Type Digital Indicating Controllers
- A 14-segment, active (PV display color changing function) color LCD display, Two five-digit, high-resolution displays are possible
- Control type : high limit or low limit
- 3 Alarm outputs
- Supports RS-485, Ethernet
Yokogawa UT52A – Advanced Application Indicating Controllers
- A 14-segment, active (PV display color changing function) color LCD display, Two five-digit, high-resolution displays are possible
- Maximum Analog Inputs: 2
- Maximum Analog Outputs: 3
- Maximum Digital Inputs: 5
- Maximum Digital Outputs: 5
- Maximum Control Modes: 8
- Ladder sequence capacity up to 500 steps
- Supports RS-485
Yokogawa UT55A – Advanced Application Indicating Controllers
- A 14-segment, active (PV display color changing function) color LCD display, Two five-digit, high-resolution displays are possible
- Maximum Analog Inputs: 4
- Maximum Analog Outputs: 3
- Maximum Digital Inputs: 9
- Maximum Digital Outputs: 18
- Maximum Control Modes: 8
- Ladder sequence capacity up to 500 steps
- Supports RS-485, Ethernet, open networks (CC-Link, PROFIBUS-DP, DeviceNet)
Yokogawa UT75A – Advanced Application Indicating Controllers
- A 14-segment, active (PV display color changing function) color LCD display, Two five-digit, high-resolution displays are possible
- Maximum Analog Inputs: 4
- Maximum Analog Outputs: 3
- Maximum Digital Inputs: 8
- Maximum Digital Outputs: 8
- Maximum Control Modes: 9
- Ladder sequence capacity up to 1,000 steps
- Supports RS-485, Ethernet, open networks (CC-Link, PROFIBUS-DP, DeviceNet)
Yokogawa WT1800E – High Performance Power Analyzer
- Sample Rate: 2MS/s
- Power Bandwidth: 0.1Hz-1 MHz
- Resolution: 16 bit
- Elements: 1-6
- Accuracy: 0.05%
- 8.4″ TFT LCD monitor
Yokogawa WT300E – Compact Power Analyzer
- Sample Rate: 100 kS/s
- Power Bandwidth: 0.1 Hz-100 kHz
- Resolution: 16 bit
- Elements: 1-3
- Accuracy: 0.15%
Yokogawa GA10 Data Logging Software
GA10 is PC-based data logging application software for monitoring and recording by connecting devices distributed in a factory or on the premises via Ethernet network. The centralization of PCs will improve the efficiency of monitoring and recording operations and reduce the burden.
- Collecting data can be prepared in 3 steps
- Unified monitoring using custom screens tailored to uses
- Cost-savings through demand monitoring