Portable & Handheld Instruments
Siglent SHS1000X – Handheld Oscilloscope
- Isolation voltage: CATIII 600 Vrms, CATII 1000 Vrms
- Combines oscilloscope, serial trigger and decoder, spectrum analysis, data logger, and multimeter functions into a convenient and portable design
- Available in 100 MHz or 200 MHz bandwidth models
- Sample rate: 1 GSa/s (single-channel) or 500 MSa/s (two-channels)
- Record length: Up to 12 Mpts
- Includes hardware-based true RMS multimeter
- IP51 dust/water resistance certified
Siglent SHS800X – Handheld Oscilloscope
- Combines oscilloscope, serial trigger and decoder, spectrum analysis, data logger, and multimeter functions in a portable design
- Available in 100 MHz or 200 MHz bandwidth models
- Sampling rate: 1 GSa/s (single-channel) or 500 MSa/s (two-channels)
- Record length: Up to 12 Mpts
- Allows waveform recording for up to 22 hours
- IP51 dust/water resistance certified
NEO Messtechnik PQA 8000 – Mobile Power Quality Analyzer
The NEO PQA8000 reflects our understanding of power grid applications of today – the most complete and reliable mobile Analyzer you will find on the market. Multi-Touch, 4 hours mobile operation and complying with Power Quality Standards and Grid Codes your measurement application requires. Class A Power Quality Analyzer for measurements and analyses way beyond EN50160.
The only instruments in the world measuring Supraharmonic currents and voltages up to 500 kHz.
Request a demo
NEO Messtechnik PQA 7000 – Mobile Power Quality Analyzer
The NEO PQA7000 is the complete package mobile power quality analyzer. Featuring Multi-Touch, 6 hours mobile operation and complying with Power Quality Standards and Grid Codes your measurement application requires. Class A Power Quality Analyzer for measurements and analyses way beyond EN50160.
Yokogawa TX10 Digital Thermometers
TX10 Series offers thermocouple thermometers that support K, J, E and T type thermocouples.
There are three models available:
- 1-channel single-function
- 1-channel multi-function
- 2-channel multi-function models.
NEO Messtechnik PV Master – Solar Photovoltaic Inspection
The NEO PV Master products ensure quick and reliable inspection and evaluation of solar plants including a fully-automatic AI based system diagnostic. Up to 24 input channels with a rating of up to 1600V DC together with the smart IV-curve diagnostic function allows simultaneous evaluation of multiple PV strings and complete PV arrays.
Yokogawa 30032A – Clamp-on Tester
- Leakage current measurement range from 3mA to 60A
- Diameter of measurable conductor: 40 mm max.
- Easier and clear display
Yokogawa CA310 – Process Calibrator
- Basic Accuracy: 0.015% (Source&Meas. accuracy of Voltage mA)
- 20 mA SIMULATE (SINK) function
- Simultaneously supplies 24 V loop power and measure output signal with high accuracy
- HART/BRAIN comm. resistance (250Ω) embedded
- Sub display displays span% of the source value
- Corresponds to various types of source pattern (Step sweep/ Linear sweep/ Manual step/ Span check)
- Sources by 25% step automatically from 0% to 100% of span
- Sources by 25% step manually from 0% to 100% of span.
- Simple operation, easy to use
- Rotary switch range selector
- Linear Sweep Function
- Lightweight, compact body
- Span Check Function
Yokogawa CA320 – Process Calibrator
- Basic accuracy: 0.5°C (Typical of TC type K)
*Including accuracy of internal RJC - Sub display displays value of voltage source and span%
- Corresponds to 16 types of TC standard
(JIS/IEC/DIN/ASTM/GOST R) - Corresponds to various types of source pattern
(Step sweep/ Linear sweep/ Manual step/ Span check) - Corresponds to other TC types by mV source function
- Measures TC sensor output as a thermometer
Yokogawa CA330 – Process Calibrator
- Basic accuracy: 0.3°C (Typical of PT100)
- Corresponds to 14 types of RTD standard (JIS/IEC/GOST R)
- Sub display displays value of resistance source and span%
- Corresponds to various types of source pattern
(Step sweep/ Linear sweep/ Manual step/ Span check) - Corresponds to 2,3,4 wire. Realizes RTD simulation
- Measures output of RTD sensor as a thermometer
- Sources by 25% step automatically from 0% to 100% of span
- Sources by 25% step manually from 0% to 100% of span.
- Simple operation, easy to use
- Rotary switch range selector
- Linear Sweep Function
- Lightweight, compact body
- Span Check Function
Yokogawa CA450 – Process Multimeter
- Display: 5-digit LCD (7 segment)
- Loop power and 4-20 mA
- Generation function
- DC mA 0.05%/30.000 mA
Yokogawa CA500 – Multi-Function Process Calibrator
- Sources and measures DC voltage, DC current, RTD, TC, resistance, frequency and pulse signals
- Corresponds to 17 types of TC standard (JIS/IEC/DIN/ASTM/GOST R)
- Corresponds to 14 types of RTD standard (JIS/IEC/GOST R)
- Linear sweep function: Continuously Source from 0% to 100%
- Step sweep function: Change output in a staircase (step) pattern by specifying the number of steps. (The number of steps can be set from 2 to 20)
- Program sweep function: Users can set the desired output value (%) and number of steps. (10 steps for CA500, 20 steps for CA550)
Yokogawa CA700 – Precision Pressure Calibrator
- High Accuracy and Long Stability: Achieves the highest accuracy in the portable class
- Basic accuracy: Pressure (measurement) / 0.01% rdg. Current/voltage (source/measurement) / 0.015% rdg
- Rangeability – Achieves the highest resolution and widest range in the portable class
- User Support – Strong support for field calibration and maintenance work
- Calibration procedures of pressure transmitters and pressure switches are embedded
- IP54 dustproof and waterproof robust case enables use in harsh environments
- Three high-performance hand pump models for different pressure ranges are available
Yokogawa CA71 – Multifunction Calibrator
- Source and measure operations can be performed at the same time
(Select from the following source signal and measurement signal options: voltage, current, resistance, thermocouple (TC), resistance temperature detector (RTD),frequency, pulse) - AC voltages, including supply voltage, can be measured
- Divided output (n/m) function, Auto-step function, Sweep function, Memory function and Communication function are available
- 20 mA SINK Function
- 4−20 mA Step Function
- Equivalent Output of TC/RTD and Built-in Reference Junction Compensation Sensor
- Generation and Measurement of Pulse Generation and Measurement of Voltage Pulse and Contact Pulse
- Pulse Cycle Function
- CPM (count/min), CPH (count/hour) Function
- Memory Function: can handle a maximum of 50 sets of data by means of its built-in memory
Yokogawa CL120 – Mini Clamp-on Testers
- 3 1/2 digit LCD display
- 20A range: 2.0%+7dgt (50 to 1kHz) accuracy
- 200A range: 3.0%+10dgt (40 to 1kHz) accuracy
- Exclusive model for AC current measurement with current ranges up to 200AAC
- Lightweight and compact design
- Measures conductors up to 24mm in diameter
- Data Hold function
- Mean value display
- Approved for conformity to safety standards EN61010-1,EN61010-2-032 (CAT. III 300 V)
Yokogawa CL150 – Clamp-on Testers
- AC current measurement with current ranges up to 2000A
- AC/DC voltage and resistance measurements
- 54mm in diameter of measurable conductor
- Mean value display
- DC output function
- Data hold function
- Sleep function
- Approved for conformity to safety standards EN61010-1,
- EN61010-2-031, EN61010-2-032 (CAT. m 600 V, CAT. II1000 V)
Yokogawa CL155 – Clamp-on Testers
- AC current measurement with current ranges up to 2000A
- AC/DC voltage and resistance measurements
- True RMS display
- 54mm in diameter of measurable conductor
- DC output function
- Data hold function
- Sleep function
- Approved for conformity to safety standards EN61010-1, EN61010-2-031, EN61010-2-032 (CAT. HI 600 V, CAT. II1000 V)
Yokogawa CL220 – Clamp-on Testers
- AC/DC current measurements with current ranges up to 300A
- 24mm in diameter of measurable conductor
- Light weight & compact design
- Mean value display
- Sleep function
- Approved for conformity to safety standards EN61010-1, EN61010-2-032 (CAT. III 300 V)
Yokogawa CL235 – Clamp-on Testers
- True RMS display
- AC/DC current measurements with current ranges up to 600A for
- AC and 1000A for DC
- AC/DC voltage, resistance and frequency measurements 33mm in diameter of measurable conductor
- Sleep function
- Data hold function
- Approved for conformity to safety standards EN61010-1,EN61010-2-031, EN61010-2-032 (CAT. III 600 V)
Yokogawa CL250 – Clamp-on Testers
- AC/DC current measurements with current ranges up to 2000A
- AC/DC voltage and resistance measurements
- DC output
- 55mm in diameter of measurable conductor
- Mean value display
- Sleep function
- Data hold function
- Approved for conformity to safety standards EN61010-1, EN61010-2-031, EN61010-2-032 (CAT. III 600 V, CAT. II 1000 V)
Yokogawa CL255 – Clamp-on Testers
- True RMS display
- AC/DC current measurements with current ranges up to 2000A
- AC/DC voltage and resistance measurements
- DC output
- 55mm in diameter of measurable conductor
- Sleep function
- Data hold function
- Approved for conformity to safety standards EN61010-1,EN61010-2-031, EN61010-2-032 (CAT. III 600 V, CAT. II 1000 V)
Yokogawa CL320 – Clamp-on Testers
- Leakage current measurement with current range from 20mA to 200A
- Light weight and compact design
- Manual range switching and auto power-off functions
- 24mm in diameter of measurable conductor
- Mean value display
- Auto power-off
- Manual range switching
- Approved for conformity to safety standards EN61010-1, EN61010-2-032(CAT. III 300 V)
Yokogawa CL340 – Clamp-on Testers
- Leakage current measurement with current range from 40mA to 400A
- Light weight and compact design
- Manual range switching and auto power-off functions
- 40mm in diameter of measurable conductor
- Mean value display
- Auto power-off
- Manual range switching
- Approved for conformity to safety standards EN61010-1, EN61010-2-032(CAT. III 300 V)
Yokogawa CL345 – Clamp-on Testers
- Leakage current measurement with current range from 40mA to 400A
- Manual range switching and auto power-off functions
- 40mm in diameter of measurable conductor
- True RMS display
- Auto power-off
- Manual range switching
- Approved for conformity to safety standards EN61010-2-032 (CAT. III 300 V)
Yokogawa CL360 – Clamp-on Testers
- Leakage current measurement with current range from 200mA to 1000A
- AC and DC output
- 68mm in diameter of measurable conductor
- Approved for conformity to safety standards EN 61010-1, EN 61010-2-032 (CAT III 300 V)
Yokogawa CW10 – Clamp-on Power Meter
- AC / DC Power up to 600 kW, AC / DC Voltage max. 1000 V, AC / DC Current max. 600 A
- True RMS for AC
- Harmonics 1st to 25th order
- Power fluctuation using the ACA Inrush and Peak hold functions
- Frequency, Resistance, Continuity, Diode check, Power factor
- Up to 9999 counts, approx. 37mm max. diameter of measurable conductor (the jaw opens approx. 45mm max.)
- CATIV 600V and CATIII 1000V compliant for safety
- Backlight on the display area turns on and a white LED automatically illuminates the front of jaw when clamping
- Non-contact Voltage Detection (Red LED lights up on detection)
- Easy Operation with the Navigator key
- Low Pass Filter, Phase Detection, AC / DC Auto Sense
Yokogawa CL420 – Clamp-on Process Meter
- 0.2% Accuracy, 0.01mA Resolution
- Dual Display
- LED Torch Light, Backlight Display
- Analog Output Available
Yokogawa CT1000S – AC/DC Split Core Current Sensor
This AC/DC split core current sensor is designed to measure large DC and AC currents in applications like electric vehicles, renewable energy systems, inverters, and motors. It enables high-current measurements by clamping around existing current connections. Featuring a voltage output, this sensor is compatible with power analyzers (WT series and PX8000) and waveform measurement instruments (ScopeCorders and DLM series), making it a versatile tool for various high-current measurement needs.
Yokogawa EY200 – Digital Earth Tester
- Designed to safety standard IEC 61557
- Reference to IEC 60529: Degrees of protection provided by enclosures (IP54). Measurement can be made even under adverse weather conditions
- Large, easy-to-read LCD digital display 1999-count digital reading
- 2P Test leads (for simplified measurement) has a structure that both the safety alligator clip and the test probe are available
- Warns when earth resistance of auxiliary earth spikes exceeds the permissible limit
- Convenient carrying soft bag for accessories etc.
- 3-Pole Earth Resistance Measurement (Precise Measurement)
- Earth Resistance: 2000Ω LSD: 0.01 to 1Ω Earth Voltage: 200V
Yokogawa MY600 – Digital Insulation Tester
- Featuring enhanced measurement response times of 0.5 seconds and new functionallity for PASS/FAIL Judgement and Polarization Index and Dielectirc Absoprtion Ratio testing
- Ability to log up to a 1000 data points to internal memory for offline analysis to a PC
- Automatic LED backlight when working in remote areas with low visibility
- Large voltage generation and resistance measurement ranges to suit a wide variety of insulaiton types
- Basic voltage measurement accuracy of +/- 1% of reading and resistance measurement of +/- 2% of reading with the ability to measure up to 4000 MΩ
- Power off function that minimizes idle time and conserves battery life
- Built-in auto-ranging for improved resolution at lower resistance levels
- IP40 Protection Grade for enhanced ruggedness in harsh enviornments
