Showing 1–20 of 74 results

NEO Messtechnik PQA 8000 – Mobile Power Quality Analyzer

The NEO PQA8000 reflects our understanding of power grid applications of today – the most complete and reliable mobile Analyzer you will find on the market. Multi-Touch, 4 hours mobile operation and complying with Power Quality Standards and Grid Codes your measurement application requires. Class A Power Quality Analyzer for measurements and analyses way beyond EN50160.

The only instruments in the world measuring Supraharmonic currents and voltages up to 500 kHz.

NEO Messtechnik PQA 7000 – Mobile Power Quality Analyzer

The NEO PQA7000 is the complete package mobile power quality analyzer. Featuring Multi-Touch, 6 hours mobile operation and complying with Power Quality Standards and Grid Codes your measurement application requires. Class A Power Quality Analyzer for measurements and analyses way beyond EN50160.

Yokogawa TX10 Digital Thermometers

TX10 Series offers thermocouple thermometers that support K, J, E and T type thermocouples.

There are three models available:

  • 1-channel single-function
  • 1-channel multi-function
  • 2-channel multi-function models.

AEMC CA7024 – Fault Mapper Model

  • Hand-held
  • Detects opens & shorts
  • Measure cable length up to 6000 ft (2000m)
  • Automatic cable impedance compensation

AEMC CA7027 – Fault Mapper Pro

  • Identify and locate faults on power & communication cables, given access to one end only
  • Measures cable length and indicates the length and distance to cable faults to a range of 9 ft (3 m) to 19,000 ft (6000m)
  • Works with virtually any type of cable

AEMC CA7028 – Wire Mapper Pro

  • Indicates all common wiring faults including split pairs, shorts, opens, reversed pairs and crossed wires
  • Unique graphical and digital display of fault information and length
  • Indicates distances to opens and shorts and identifies locations
  • Built-in tone generator for tracing and locating cables

AEMC DTR Model 8510 – Digital Transformer Ratiometer

Digital transformer ratiometer for on-site testing of power, potential, and current transformers. Measures primary to secondary turns ratio, polarity, and excitation current. Automatically self-calibrates and checks for open windings/connections/circuit breakers, short circuits (excess excitation current), incorrect test lead placement, and reverse polarity.

AEMC Model 1015 – Megohmmeter

Performs insulation resistance testing at 500V and 1000V, and resistance measurements up to 1000Ω. Megohm log scale graduated from 0.1 to 1000MΩ. Ohm scale is linear with a range from 0 to 10Ω. Can be used for a broad range of plant and field service applications and is designed for use in harsh environments.

AEMC Model 1060 – Megohmmeter

Measures insulation resistance to 4000GΩ (4TΩ). Test results include DAR, PI, capacitance, voltage measurement, and duration of test. Memory function enables storage of test results. RS-232 interface allows connection to a computer running DataView® for configuring the instrument and downloading test results and generating reports.

AEMC Model 1950 – Thermal Imaging IR Camera

  • Focus free imaging, automatic brightness control
  • 320 x 240 pixel 2.8” color display
  • Exceptional 13 hour battery life < 3ms
  • Captures thermal & digital images simultaneously
  • Programmable trigger & cursor, configurable emissivity table

AEMC Model 407 – Clamp-On Meter

  • 1000V CAT IV Rated
  • UL 94 VI flame retardant self-extinguishing
  • 10,000-count blue electroluminescent backlit display
  • Measures up to 1000VAC (1400V peak), 1000VDC and AC+DC with resolution to 10mV
  • Measures W, VA, var and PF for single- and three-phase balanced systems
  • Measures single- and three-phase power (real, reactive and apparent) up to 3MW with resolution to 1W
  • Measures frequency to 20kHz with 0.1Hz resolution
  • Auto selects AC or DC measurement
  • True InRush® current measurement with 100mS capture
  • Measures harmonics up to the 25th
  • Records up to 1000 measurements
  • Bluetooth communication (communicates up to 30ft)
  • Includes FREE DataView® software for
    download and report generation
  • Jaw opening up to 1.89″ (48mm) (400 series)

AEMC Model 503 – Clamp-On Meter

  • Compact size – fits into your pocket
  • 400AAC current measurements
  • 600VAC volts measurements
  • Resistance measurements to 400Ω
  • Continuity with beeper below 35Ω
  • Hold function to “freeze” readings
  • Large easy-to-read 4000-count display
  • 42-segment bargraph
  • Includes test leads and a soft carrying pouch

AEMC Model 5050 – Megohmmeter

Displays test voltage, insulation resistance, and leakage current during the test; and capacitance and discharge voltage present at the test leads at the conclusion of the test. Features include automatic calculation and presentation of the Dielectric Absorption Ratio (DAR) and Polarization Index (PI).

AEMC Model 5060 – Megohmmeter

Displays test voltage, insulation resistance, and leakage current during the test; and capacitance and discharge voltage present at the test leads at the conclusion of the test. Features include automatic calculation and presentation of the Dielectric Absorption Ratio (DAR) and Polarization Index (PI). RS-232 interface allows connection to a computer running DataView® for configuring the instrument, and downloading test results and generating reports.

AEMC Model 5070 – Megohmmeter

Fully automated 5000V graphical insulation tester. Selectable and programmable test voltage (40 to 5100V). Programmable temperature correction of resistance readings. Allows programming up to three step voltage profiles, each containing up to five steps. RS-232 interface allows connection to a computer running DataView® for configuring the instrument and downloading test results and generating reports.

AEMC Model 512 – Clamp-On Meter

  • Standard size, full function Clamp-on meter
  • 1000AAC current measurements
  • 750VAC/1000VDC volt measurements
  • True RMS measurements
  • Resistance measurement to 4000Ω
  • Continuity with beeper below 40Ω
  • Frequency measurements from V and A
  • Diode test
  • 1ms Peak function for fast capture of signals
  • Hold function to “freeze” readings
  • Push-button for easy ADC zeroing
  • Large easy-to-read 4000-count display
  • 42-segment analog bargraph
  • Includes test leads and soft carrying pouch

AEMC Model 514 – Clamp-On Meter

  • Standard size, full function Clamp-on meter
  • 1000AAC current measurements
  • 750VAC/1000VDC volt measurements
  • True RMS meassurements
  • Resistance measurement to 4000Ω
  • Continuity with beeper below 40Ω
  • Frequency measurements from V and A
  • Diode test
  • 1ms Peak function for fast capture of signals
  • Ideal for inrush measurement
  • Hold function to “freeze” readings
  • Push-button for easy ADC zeroing
  • Large easy-to-read 4000-count display
  • 42-segment analog bargraph
  • Includes test leads and soft carrying pouch

AEMC Model 607 – Clamp-On Meter

  • 1000V CAT IV Rated
  • UL 94 VI flame retardant self-extinguishing
  • 10,000-count blue electroluminescent backlit display
  • Measures up to 1000VAC (1400V peak), 1000VDC and AC+DC with resolution to 10mV
  • Measures up to 2000AAC and 3000AAC
  • Measures W, VA, var and PF for single- and three-phase balanced systems
  • Measures single- and three-phase power (real, reactive and apparent) up to 3MW with resolution to 1W
  • Measures frequency to 20kHz with 0.1Hz resolution
  • Auto selects AC or DC measurement
  • True InRush® current measurement with 100mS capture
  • Measures harmonics up to the 25th
  • Records up to 1000 measurements
  • Bluetooth communication (communicates up to 30ft)
  • Includes FREE DataView® software for
    download and report generation
  • Jaw opening up to 2.36″ (60mm) (600 series)

Monarch Nova-Strobe Stroboscope

The Monarch Nova‐Strobe LED family of rugged industrial stroboscopes provide an extremely bright, uniform light output for performing stop motion diagnostic inspection and RPM measurements. The twelve LED light source is extremely efficient which means long battery life and continuous cool operation. A wide operating range of 30‐500,000 flashes per minute covers all applications.

Monarch Nova-Pro Stroboscope/Tachometer

The Nova-Pro™ is a series of powerful portable visual inspection and speed measurement tools. We have combined all the features of our hand held LED stroboscopes together with a full function laser tachometer to create a compact, ergonomic and extremely powerful two in one predictive maintenance tool. The stroboscope light source is made up of twelve LED’s which are extraordinarily bright yet extremely efficient allowing cool continuous operation and long lasting rechargeable battery. Continuous operation is also possible with the optional AC adapter.