Portable & Handheld Instruments
UNI-T UT171 Series – True RMS Multimeters
- AC+DC measurement
- Peak hold
- Rechargeable battery
- VFC low-pass filtering
- USB/Bluetooth communication
UNI-T UT196 Series – True RMS Professional Multimeter – Solar Pro
- True RMS
- Measure up to DC 1700V and AC 1500V for high voltage applications such as solar array, wind, and other power utility maintenance
- Analog bar
- Frequency response: 45Hz~1kHz
- IP65 protection
UNI-T UT202BT/UT202T Series – Smart AC Clamp Meters
- Button-design clamp meter
- One-hand operation and easy to use
- True RMS / 9999 counts
- Jaw opening: 28mm
- 600V AC/DC voltage measurement
- 600A AC current measurement
- Dual display: V+HZ and A+HZ
- Bright backlight / Flashlight
- Non-contact voltage (NCV)
- CAT III 600V
UNI-T UT210 Series – Mini Clamp Meters
- Ergonomic and lightweight
- Auto range, 2~3 times/s sampling rate
- LCD backlight, data hold
- Auto power off, low battery indication
UNI-T UT256 Series – True RMS Fork Meter
- True-RMS
- Jaw opening: 10mm
- Zero function
- Data hold
- Relative mode
- NCV
- CAT III 600V
UNI-T UT33+/UT131 Series – Palm Size Multimeters
- Clear LCD display
- Comfortable protective cover, with test lead hanging groove
- 2 meters drop test, precision protection
- Loud buzzer sound
- Ergonomic design
UNI-T UT385 Series – Laser Power Meter
- Precise laser sensor
- LCD screen for clear readings
- Data storage function
- Threshold alarm function
- Selectable and customizable wavelengths
- Low power consumption
- Split design with retractable spring wire
UNI-T UT505 Series – Handheld Insulation Resistance Testers
- Analog bar graph
- True RMS
- DARPI/Timing measurement
- Comparison measurement
- Auto fuse check (UT505B)
- High voltage output alarm
- Auto discharge
- Continuity buzzer
- 99-group data storage
NEO Messtechnik PQA 8000 – Mobile Power Quality Analyzer
The NEO PQA8000 reflects our understanding of power grid applications of today – the most complete and reliable mobile Analyzer you will find on the market. Multi-Touch, 4 hours mobile operation and complying with Power Quality Standards and Grid Codes your measurement application requires. Class A Power Quality Analyzer for measurements and analyses way beyond EN50160.
The only instruments in the world measuring Supraharmonic currents and voltages up to 500 kHz.
NEO Messtechnik PQA 7000 – Mobile Power Quality Analyzer
The NEO PQA7000 is the complete package mobile power quality analyzer. Featuring Multi-Touch, 6 hours mobile operation and complying with Power Quality Standards and Grid Codes your measurement application requires. Class A Power Quality Analyzer for measurements and analyses way beyond EN50160.
Yokogawa TX10 Digital Thermometers
TX10 Series offers thermocouple thermometers that support K, J, E and T type thermocouples.
There are three models available:
- 1-channel single-function
- 1-channel multi-function
- 2-channel multi-function models.
AEMC CA7024 – Fault Mapper Model
- Hand-held
- Detects opens & shorts
- Measure cable length up to 6000 ft (2000m)
- Automatic cable impedance compensation
AEMC CA7027 – Fault Mapper Pro
- Identify and locate faults on power & communication cables, given access to one end only
- Measures cable length and indicates the length and distance to cable faults to a range of 9 ft (3 m) to 19,000 ft (6000m)
- Works with virtually any type of cable
AEMC CA7028 – Wire Mapper Pro
- Indicates all common wiring faults including split pairs, shorts, opens, reversed pairs and crossed wires
- Unique graphical and digital display of fault information and length
- Indicates distances to opens and shorts and identifies locations
- Built-in tone generator for tracing and locating cables
AEMC DTR Model 8510 – Digital Transformer Ratiometer
Digital transformer ratiometer for on-site testing of power, potential, and current transformers. Measures primary to secondary turns ratio, polarity, and excitation current. Automatically self-calibrates and checks for open windings/connections/circuit breakers, short circuits (excess excitation current), incorrect test lead placement, and reverse polarity.
AEMC Model 1015 – Megohmmeter
Performs insulation resistance testing at 500V and 1000V, and resistance measurements up to 1000Ω. Megohm log scale graduated from 0.1 to 1000MΩ. Ohm scale is linear with a range from 0 to 10Ω. Can be used for a broad range of plant and field service applications and is designed for use in harsh environments.
AEMC Model 1060 – Megohmmeter
Measures insulation resistance to 4000GΩ (4TΩ). Test results include DAR, PI, capacitance, voltage measurement, and duration of test. Memory function enables storage of test results. RS-232 interface allows connection to a computer running DataView® for configuring the instrument and downloading test results and generating reports.
AEMC Model 1950 – Thermal Imaging IR Camera
- Focus free imaging, automatic brightness control
- 320 x 240 pixel 2.8” color display
- Exceptional 13 hour battery life < 3ms
- Captures thermal & digital images simultaneously
- Programmable trigger & cursor, configurable emissivity table
AEMC Model 407 – Clamp-On Meter
- 1000V CAT IV Rated
- UL 94 VI flame retardant self-extinguishing
- 10,000-count blue electroluminescent backlit display
- Measures up to 1000VAC (1400V peak), 1000VDC and AC+DC with resolution to 10mV
- Measures W, VA, var and PF for single- and three-phase balanced systems
- Measures single- and three-phase power (real, reactive and apparent) up to 3MW with resolution to 1W
- Measures frequency to 20kHz with 0.1Hz resolution
- Auto selects AC or DC measurement
- True InRush® current measurement with 100mS capture
- Measures harmonics up to the 25th
- Records up to 1000 measurements
- Bluetooth communication (communicates up to 30ft)
- Includes FREE DataView® software for
download and report generation - Jaw opening up to 1.89″ (48mm) (400 series)
AEMC Model 503 – Clamp-On Meter
- Compact size – fits into your pocket
- 400AAC current measurements
- 600VAC volts measurements
- Resistance measurements to 400Ω
- Continuity with beeper below 35Ω
- Hold function to “freeze” readings
- Large easy-to-read 4000-count display
- 42-segment bargraph
- Includes test leads and a soft carrying pouch
AEMC Model 5050 – Megohmmeter
Displays test voltage, insulation resistance, and leakage current during the test; and capacitance and discharge voltage present at the test leads at the conclusion of the test. Features include automatic calculation and presentation of the Dielectric Absorption Ratio (DAR) and Polarization Index (PI).
AEMC Model 5060 – Megohmmeter
Displays test voltage, insulation resistance, and leakage current during the test; and capacitance and discharge voltage present at the test leads at the conclusion of the test. Features include automatic calculation and presentation of the Dielectric Absorption Ratio (DAR) and Polarization Index (PI). RS-232 interface allows connection to a computer running DataView® for configuring the instrument, and downloading test results and generating reports.
AEMC Model 5070 – Megohmmeter
Fully automated 5000V graphical insulation tester. Selectable and programmable test voltage (40 to 5100V). Programmable temperature correction of resistance readings. Allows programming up to three step voltage profiles, each containing up to five steps. RS-232 interface allows connection to a computer running DataView® for configuring the instrument and downloading test results and generating reports.
AEMC Model 512 – Clamp-On Meter
- Standard size, full function Clamp-on meter
- 1000AAC current measurements
- 750VAC/1000VDC volt measurements
- True RMS measurements
- Resistance measurement to 4000Ω
- Continuity with beeper below 40Ω
- Frequency measurements from V and A
- Diode test
- 1ms Peak function for fast capture of signals
- Hold function to “freeze” readings
- Push-button for easy ADC zeroing
- Large easy-to-read 4000-count display
- 42-segment analog bargraph
- Includes test leads and soft carrying pouch
AEMC Model 514 – Clamp-On Meter
- Standard size, full function Clamp-on meter
- 1000AAC current measurements
- 750VAC/1000VDC volt measurements
- True RMS meassurements
- Resistance measurement to 4000Ω
- Continuity with beeper below 40Ω
- Frequency measurements from V and A
- Diode test
- 1ms Peak function for fast capture of signals
- Ideal for inrush measurement
- Hold function to “freeze” readings
- Push-button for easy ADC zeroing
- Large easy-to-read 4000-count display
- 42-segment analog bargraph
- Includes test leads and soft carrying pouch
AEMC Model 607 – Clamp-On Meter
- 1000V CAT IV Rated
- UL 94 VI flame retardant self-extinguishing
- 10,000-count blue electroluminescent backlit display
- Measures up to 1000VAC (1400V peak), 1000VDC and AC+DC with resolution to 10mV
- Measures up to 2000AAC and 3000AAC
- Measures W, VA, var and PF for single- and three-phase balanced systems
- Measures single- and three-phase power (real, reactive and apparent) up to 3MW with resolution to 1W
- Measures frequency to 20kHz with 0.1Hz resolution
- Auto selects AC or DC measurement
- True InRush® current measurement with 100mS capture
- Measures harmonics up to the 25th
- Records up to 1000 measurements
- Bluetooth communication (communicates up to 30ft)
- Includes FREE DataView® software for
download and report generation - Jaw opening up to 2.36″ (60mm) (600 series)
Monarch Nova-Strobe Stroboscope
The Monarch Nova‐Strobe LED family of rugged industrial stroboscopes provide an extremely bright, uniform light output for performing stop motion diagnostic inspection and RPM measurements. The twelve LED light source is extremely efficient which means long battery life and continuous cool operation. A wide operating range of 30‐500,000 flashes per minute covers all applications.
Monarch Nova-Pro Stroboscope/Tachometer
The Nova-Pro™ is a series of powerful portable visual inspection and speed measurement tools. We have combined all the features of our hand held LED stroboscopes together with a full function laser tachometer to create a compact, ergonomic and extremely powerful two in one predictive maintenance tool. The stroboscope light source is made up of twelve LED’s which are extraordinarily bright yet extremely efficient allowing cool continuous operation and long lasting rechargeable battery. Continuous operation is also possible with the optional AC adapter.
AEMC Model 6240 – Micro-Ohmmeter
Four-lead Kelvin tester measures very low resistance from 1µΩ to 400Ω with resolutions to 1µΩ. Selectable test currents of 10A, 1A, 100mA, and 10mA, with a polarity reversal function. Tests both resistive and inductive material, and stores up to 99 measurements. Includes DataView® for configuring the instrument, downloading data, and generating reports.
AEMC Model 6255 – Micro-Ohmmeter
Four-lead Kelvin tester measures very low resistance from 1µΩ to 2500Ω with results within 0.05%. Three test modes are available; resistive (instantaneous test), inductive (continuous test), and auto (repetitive test). Stores up to 1500 measurements. Includes DataView® for configuring the instrument, downloading data, and generating reports.
AEMC Model 6292 – Micro-Ohmmeter
Microprocessor-controlled tester measures resistance up to 1Ω with a resolution of 0.1µΩ, using test currents up to 200A. Features optimized filters and protection for measurements in electrical substations. Designed for measuring very low contact resistances of high voltage circuit breakers, switches, busbars, and other units. Includes DataView® for configuring the instrument, downloading data, and generating reports.
AEMC Model 6501 – Megohmmeter
Performs resistance testing to 500kΩ and continuity testing to 100Ω. Hand-cranked operation provides a steady DC voltage output across the entire range for consistently reliable readings. Designed for a broad range of plant and field service applications, including acceptance testing and preventive maintenance of wiring, cables, switchgear, and motors.
AEMC Model 6503 – Megohmmeter
Provides three test voltages for insulation resistance testing: 250V, 500V and 1000V. Test voltages are generated in full across the entire measurement range. Hand-cranked operation provides a steady DC voltage output across the entire range for consistently reliable readings. Designed for a broad range of plant and field service applications, including acceptance testing and preventive maintenance of wiring, cables, switchgear, and motors.
AEMC Model 6522 – Megohmmeter
Insulation and continuity tester featuring three test voltages (250V, 500V, and 1000V) for insulation resistance testing up to 40GΩ, and continuity tests at 200mA. Timed Test Mode enables insulation testing up to 40 minutes. Supports optional Remote Probe accessory. Complies with International Insulation Testing Standards including IEC/EN 61557.
AEMC Model 6524 – Megohmmeter
Multi-function tester for measuring insulation resistance up to 200GΩ, with test voltages of 50V, 100V, 250V, 500V, and 1000V. Automatically calculates DAR and PI ratios. Provides Timed Test Mode for tests up to 40 minutes. Also measures resistance, continuity, frequency, and voltage. Includes memory for storing up to 300 measurements. Complies with International Insulation Testing Standards including IEC/EN 61557, and is rated 600V CAT IV.
AEMC Model 6526 – Megohmmeter
Multi-function tester for measuring insulation resistance up to 200GΩ, with test voltages of 50V, 100V, 250V, 500V, and 1000V. Also measures resistance, capacitance, continuity, frequency, and voltage. Includes memory for storing up to 1300 measurements. Bluetooth allows connection to a computer running DataView®. Complies with International Insulation Testing Standards including IEC/EN 61557, and is rated 600V CAT IV.
AEMC Model 6532 – Megohmmeter
Multi-function tester for measuring insulation resistance up to 20GΩ, with test voltages of 50V and 100V. Also measures resistance, capacitance, continuity, frequency, line length, and voltage. Includes memory for storing up to 1300 measurements. Bluetooth allows connection to a computer running DataView®. Complies with International Insulation Testing Standards including IEC/EN 61557, and is rated 600V CAT IV.
AEMC Model 6534 – Megohmmeter
Multi-function tester for measuring insulation resistance up to 50GΩ, with test voltages of 10V, 25V, 100V, 250V, and 500V. Also measures resistance, continuity, and voltage. Includes memory for storing up to 1300 measurements. Bluetooth allows connection to a computer running DataView®. Complies with International Insulation Testing Standards including IEC/EN 61557, and is rated 600V CAT IV.
AEMC Model 6608 – Phase & Motor Rotation Meter
- Phase and motor rotation indicators
- Color-coded leads (red, black, blue) and alligator clips (black)
- Simple operation
- Line supplied – no battery
- 600V CAT III rated and CE Mark
AEMC Model 6609 – Phase & Motor Rotation Meter
- Phase and motor rotation indicators
- Color-coded leads (red, black, blue) and alligator clips (black)
- Simple operation
- 600V CAT III rated and CE Mark
AEMC Model 6610 – Phase & Motor Rotation Meter
- Voltage sensing detector clips (no metal contact points)
- Operating voltage: 75 to 1000VAC
- Frequency range: 45 to 65Hz
- Phase rotation LED indicators (ABC or BAC)
- Bright LED indication Live or Open Phase (A, B, C)
- Includes three attached color-coded test leads with non-metallic alligator sensor clips for easy connection to the device under test
- Low battery indicator
- Back cover includes a magnet feature that can mount the instrument onto any metal cabinet panel for easy measurement
- EN61010-1; 1000V CAT III; 600V CAT IV
AEMC Model 670 – Clamp-On Meter
- Standard size, full function clamp-on meter
- 1000AAC current measurements
- 1400VDC volt measurements
- TRMS measurements
- Resistance measurement to 10,000Ω
- Continuity with beeper below 35Ω
- Frequency measurements from V and A
- 1ms Peak function for fast capture of signals
- Hold function to “freeze” readings
- Designed to measure Amps and Volts at the same time
- Push-button for easy ADC zeroing
- Large easy-to-read 9999-count backlit display Includes test leads and soft carrying case
- Auto-ranging
AEMC Model 675 – Clamp-On Meter
- Standard size, full function clamp-on meter
- 1000AAC current measurements
- 1000Aac/dc currentmeasurements
- 1400VDC volt measurements
- TRMS measurements
- Resistance measurement to 10,000Ω
- Continuity with beeper below 35Ω
- Frequency measurements from V and A
- 1ms Peak function for fast capture of signals
- Hold function to “freeze” readings
- Designed to measure Amps and Volts at the same time
- Push-button for easy ADC zeroing
- Large easy-to-read 9999-count backlit display Includes test leads and soft carrying case
- Auto-ranging
AEMC Model 8505 – Quick Tester Transformer Ratiometer
Hand-held instrument for performing quick, basic integrity tests on transformers and capacitors. Verifies transformer winding continuity without requiring full transformer ratio test. Simple, single-button operation with built-in fuse protection.
AEMC Model ALS-1 – AC Line Splitter
- Avoids splitting lines, makes reading current easy
- Increases sensitivity of clamp-on probes and clamp-on meters ten times in X10 mode
- Direct reading X1 mode
- Voltmeter input jacks
- Integral ground conductor
- 120V, 15A capacity
AEMC Model CA1725 – Tachometer
- Measurements up to 100,000rpm
- Extensive programming possibilities
- Digital display with analog bargraph
- Stores up to 4000 measurements results
AEMC Model CA1727 – Tachometer
- Measurements up to 100,000rpm
- Extensive programming possibilities
- Digital display with analog bargraph
- Stores up to 4000 measurements results
- USB interface & TachoGraph software
AEMC Model CA811 – Lightmeter
- Easy one-hand operation
- Designed to measure a wide range of lighting types
- Removable sensor for remote reading
- Measures in footcandles (fc) or lux
- Cosine corrected
- HOLD function
- MAX function
- 2000-count backlit LCD
- CIE photoptic (human eye) response
- Lightweight and compact
- Removable protective sensor cover
- Includes rugged, shockproof, protective, dirt resistant holster
AEMC Model CA813 – Lightmeter
- Easy one-hand operation
- Designed to measure a wide range of lighting types
- Removable sensor for remote reading
- Measures in footcandles (fc) or lux
- Cosine corrected
- HOLD function
- PEAK function
- 2000-count backlit LCD
- CIE photoptic (human eye) response
- Lightweight and compact
- Removable protective sensor cover
- Includes rugged, shockproof, protective, dirt resistant holster
AEMC Model CA832 – Sound Level Meter
- Easy one-hand operation
- Measures sound according to the sensitivity of the human ear
- MAX function
- Three measurement range from 35 to 130dB
- Accuracy ±1.5dB
- Two time weighting curves: slow (550ms) and fast (55ms)
- Two frequency weighting curves: A and C
- Auxiliary output for recording
- Tripod mountable
- 2000-count backlit LCD
- Lightweight and compact
- Includes rugged, shockproof, protective, dirt resistant holster
AEMC Model CA846 – Thermo-Hygrometer
- Easy one-hand operation
- Measures temperature in °F and °C
- Accurate NTC sensor
- Quick response RH sensor
- MAX and HOLD functions
- 2000-count backlit LCD
- Lightweight and compact
- Removable protective sensor cover
- Includes rugged, shockproof, protective, dirt resistant holster
AEMC PowerPad III Model 8333 – Power Quality Analyzer
The PowerPad® III Model 8333 is a three-phase power quality analyzer that is easy-to-use, compact and shock resistant. It enables technicians and engineers to measure and carry out diagnostics and power quality work on single- or three-phase networks. Three current and four voltage input terminals are provided. It is IEC 61000-4-30 Class B and safety rated to 600V CAT IV.
AEMC PowerPad III Model 8336 – Power Quality Analyzer
The PowerPad® III Model 8336 is a three-phase power quality analyzer that is easy-to-use, compact and shock resistant. It enables technicians and engineers to measure and carry out diagnostics and power quality work on one-, two- or three- phase networks. Five voltage and four current inputs are provided. It is IEC 61000-4-30 Class B and safety rated to 600V CAT IV.
NEO Messtechnik PV Master – Solar Photovoltaic Inspection
The NEO PV Master products ensure quick and reliable inspection and evaluation of solar plants including a fully-automatic AI based system diagnostic. Up to 24 input channels with a rating of up to 1600V DC together with the smart IV-curve diagnostic function allows simultaneous evaluation of multiple PV strings and complete PV arrays.
Yokogawa 30032A – Clamp-on Tester
- Leakage current measurement range from 3mA to 60A
- Diameter of measurable conductor: 40 mm max.
- Easier and clear display
Yokogawa CA310 – Process Calibrator
- Basic Accuracy: 0.015% (Source&Meas. accuracy of Voltage mA)
- 20 mA SIMULATE (SINK) function
- Simultaneously supplies 24 V loop power and measure output signal with high accuracy
- HART/BRAIN comm. resistance (250Ω) embedded
- Sub display displays span% of the source value
- Corresponds to various types of source pattern (Step sweep/ Linear sweep/ Manual step/ Span check)
- Sources by 25% step automatically from 0% to 100% of span
- Sources by 25% step manually from 0% to 100% of span.
- Simple operation, easy to use
- Rotary switch range selector
- Linear Sweep Function
- Lightweight, compact body
- Span Check Function
Yokogawa CA320 – Process Calibrator
- Basic accuracy: 0.5°C (Typical of TC type K)
*Including accuracy of internal RJC - Sub display displays value of voltage source and span%
- Corresponds to 16 types of TC standard
(JIS/IEC/DIN/ASTM/GOST R) - Corresponds to various types of source pattern
(Step sweep/ Linear sweep/ Manual step/ Span check) - Corresponds to other TC types by mV source function
- Measures TC sensor output as a thermometer
Yokogawa CA330 – Process Calibrator
- Basic accuracy: 0.3°C (Typical of PT100)
- Corresponds to 14 types of RTD standard (JIS/IEC/GOST R)
- Sub display displays value of resistance source and span%
- Corresponds to various types of source pattern
(Step sweep/ Linear sweep/ Manual step/ Span check) - Corresponds to 2,3,4 wire. Realizes RTD simulation
- Measures output of RTD sensor as a thermometer
- Sources by 25% step automatically from 0% to 100% of span
- Sources by 25% step manually from 0% to 100% of span.
- Simple operation, easy to use
- Rotary switch range selector
- Linear Sweep Function
- Lightweight, compact body
- Span Check Function
Yokogawa CA450 – Process Multimeter
- Display: 5-digit LCD (7 segment)
- Loop power and 4-20 mA
- Generation function
- DC mA 0.05%/30.000 mA
Yokogawa CA500 – Multi-Function Process Calibrator
- Sources and measures DC voltage, DC current, RTD, TC, resistance, frequency and pulse signals
- Corresponds to 17 types of TC standard (JIS/IEC/DIN/ASTM/GOST R)
- Corresponds to 14 types of RTD standard (JIS/IEC/GOST R)
- Linear sweep function: Continuously Source from 0% to 100%
- Step sweep function: Change output in a staircase (step) pattern by specifying the number of steps. (The number of steps can be set from 2 to 20)
- Program sweep function: Users can set the desired output value (%) and number of steps. (10 steps for CA500, 20 steps for CA550)
Yokogawa CA700 – Precision Pressure Calibrator
- High Accuracy and Long Stability: Achieves the highest accuracy in the portable class
- Basic accuracy: Pressure (measurement) / 0.01% rdg. Current/voltage (source/measurement) / 0.015% rdg
- Rangeability – Achieves the highest resolution and widest range in the portable class
- User Support – Strong support for field calibration and maintenance work
- Calibration procedures of pressure transmitters and pressure switches are embedded
- IP54 dustproof and waterproof robust case enables use in harsh environments
- Three high-performance hand pump models for different pressure ranges are available
Yokogawa CA71 – Multifunction Calibrator
- Source and measure operations can be performed at the same time
(Select from the following source signal and measurement signal options: voltage, current, resistance, thermocouple (TC), resistance temperature detector (RTD),frequency, pulse) - AC voltages, including supply voltage, can be measured
- Divided output (n/m) function, Auto-step function, Sweep function, Memory function and Communication function are available
- 20 mA SINK Function
- 4−20 mA Step Function
- Equivalent Output of TC/RTD and Built-in Reference Junction Compensation Sensor
- Generation and Measurement of Pulse Generation and Measurement of Voltage Pulse and Contact Pulse
- Pulse Cycle Function
- CPM (count/min), CPH (count/hour) Function
- Memory Function: can handle a maximum of 50 sets of data by means of its built-in memory
Yokogawa CL120 – Mini Clamp-on Testers
- 3 1/2 digit LCD display
- 20A range: 2.0%+7dgt (50 to 1kHz) accuracy
- 200A range: 3.0%+10dgt (40 to 1kHz) accuracy
- Exclusive model for AC current measurement with current ranges up to 200AAC
- Lightweight and compact design
- Measures conductors up to 24mm in diameter
- Data Hold function
- Mean value display
- Approved for conformity to safety standards EN61010-1,EN61010-2-032 (CAT. III 300 V)
Yokogawa CL150 – Clamp-on Testers
- AC current measurement with current ranges up to 2000A
- AC/DC voltage and resistance measurements
- 54mm in diameter of measurable conductor
- Mean value display
- DC output function
- Data hold function
- Sleep function
- Approved for conformity to safety standards EN61010-1,
- EN61010-2-031, EN61010-2-032 (CAT. m 600 V, CAT. II1000 V)
Yokogawa CL155 – Clamp-on Testers
- AC current measurement with current ranges up to 2000A
- AC/DC voltage and resistance measurements
- True RMS display
- 54mm in diameter of measurable conductor
- DC output function
- Data hold function
- Sleep function
- Approved for conformity to safety standards EN61010-1, EN61010-2-031, EN61010-2-032 (CAT. HI 600 V, CAT. II1000 V)
Yokogawa CL220 – Clamp-on Testers
- AC/DC current measurements with current ranges up to 300A
- 24mm in diameter of measurable conductor
- Light weight & compact design
- Mean value display
- Sleep function
- Approved for conformity to safety standards EN61010-1, EN61010-2-032 (CAT. III 300 V)
Yokogawa CL235 – Clamp-on Testers
- True RMS display
- AC/DC current measurements with current ranges up to 600A for
- AC and 1000A for DC
- AC/DC voltage, resistance and frequency measurements 33mm in diameter of measurable conductor
- Sleep function
- Data hold function
- Approved for conformity to safety standards EN61010-1,EN61010-2-031, EN61010-2-032 (CAT. III 600 V)
Yokogawa CL250 – Clamp-on Testers
- AC/DC current measurements with current ranges up to 2000A
- AC/DC voltage and resistance measurements
- DC output
- 55mm in diameter of measurable conductor
- Mean value display
- Sleep function
- Data hold function
- Approved for conformity to safety standards EN61010-1, EN61010-2-031, EN61010-2-032 (CAT. III 600 V, CAT. II 1000 V)
Yokogawa CL255 – Clamp-on Testers
- True RMS display
- AC/DC current measurements with current ranges up to 2000A
- AC/DC voltage and resistance measurements
- DC output
- 55mm in diameter of measurable conductor
- Sleep function
- Data hold function
- Approved for conformity to safety standards EN61010-1,EN61010-2-031, EN61010-2-032 (CAT. III 600 V, CAT. II 1000 V)
Yokogawa CL320 – Clamp-on Testers
- Leakage current measurement with current range from 20mA to 200A
- Light weight and compact design
- Manual range switching and auto power-off functions
- 24mm in diameter of measurable conductor
- Mean value display
- Auto power-off
- Manual range switching
- Approved for conformity to safety standards EN61010-1, EN61010-2-032(CAT. III 300 V)
Yokogawa CL340 – Clamp-on Testers
- Leakage current measurement with current range from 40mA to 400A
- Light weight and compact design
- Manual range switching and auto power-off functions
- 40mm in diameter of measurable conductor
- Mean value display
- Auto power-off
- Manual range switching
- Approved for conformity to safety standards EN61010-1, EN61010-2-032(CAT. III 300 V)
Yokogawa CL345 – Clamp-on Testers
- Leakage current measurement with current range from 40mA to 400A
- Manual range switching and auto power-off functions
- 40mm in diameter of measurable conductor
- True RMS display
- Auto power-off
- Manual range switching
- Approved for conformity to safety standards EN61010-2-032 (CAT. III 300 V)
Yokogawa CL360 – Clamp-on Testers
- Leakage current measurement with current range from 200mA to 1000A
- AC and DC output
- 68mm in diameter of measurable conductor
- Approved for conformity to safety standards EN 61010-1, EN 61010-2-032 (CAT III 300 V)
Yokogawa CW10 – Clamp-on Power Meter
- AC / DC Power up to 600 kW, AC / DC Voltage max. 1000 V, AC / DC Current max. 600 A
- True RMS for AC
- Harmonics 1st to 25th order
- Power fluctuation using the ACA Inrush and Peak hold functions
- Frequency, Resistance, Continuity, Diode check, Power factor
- Up to 9999 counts, approx. 37mm max. diameter of measurable conductor (the jaw opens approx. 45mm max.)
- CATIV 600V and CATIII 1000V compliant for safety
- Backlight on the display area turns on and a white LED automatically illuminates the front of jaw when clamping
- Non-contact Voltage Detection (Red LED lights up on detection)
- Easy Operation with the Navigator key
- Low Pass Filter, Phase Detection, AC / DC Auto Sense
Yokogawa CL420 – Clamp-on Process Meter
- 0.2% Accuracy, 0.01mA Resolution
- Dual Display
- LED Torch Light, Backlight Display
- Analog Output Available
Yokogawa EY200 – Digital Earth Tester
- Designed to safety standard IEC 61557
- Reference to IEC 60529: Degrees of protection provided by enclosures (IP54). Measurement can be made even under adverse weather conditions
- Large, easy-to-read LCD digital display 1999-count digital reading
- 2P Test leads (for simplified measurement) has a structure that both the safety alligator clip and the test probe are available
- Warns when earth resistance of auxiliary earth spikes exceeds the permissible limit
- Convenient carrying soft bag for accessories etc.
- 3-Pole Earth Resistance Measurement (Precise Measurement)
- Earth Resistance: 2000Ω LSD: 0.01 to 1Ω Earth Voltage: 200V
Yokogawa MY600 – Digital Insulation Tester
- Featuring enhanced measurement response times of 0.5 seconds and new functionallity for PASS/FAIL Judgement and Polarization Index and Dielectirc Absoprtion Ratio testing
- Ability to log up to a 1000 data points to internal memory for offline analysis to a PC
- Automatic LED backlight when working in remote areas with low visibility
- Large voltage generation and resistance measurement ranges to suit a wide variety of insulaiton types
- Basic voltage measurement accuracy of +/- 1% of reading and resistance measurement of +/- 2% of reading with the ability to measure up to 4000 MΩ
- Power off function that minimizes idle time and conserves battery life
- Built-in auto-ranging for improved resolution at lower resistance levels
- IP40 Protection Grade for enhanced ruggedness in harsh enviornments
Yokogawa TY520 – Digital Multimeter
- High Precision
- Basic accuracy 0.09%
- True RMS measurement
- Ensured Field Site Safety
- Safety shutters preventing erroneous insertion of leads
- New Functions for Yokogawa Middle Class DMMs
- Current direct reading function by current clamp sensor (optional)
- Low-pass Filter (LPF)
- Logging-mode memory for 1600 data
- USB communication (Optional communication package)
- Closed Case Calibration
- 3-year Warranty
Yokogawa TY530 – Digital Multimeter
- High Precision
- Basic accuracy 0.09%
- True RMS measurement
- Ensured Field Site Safety
- Safety shutters for preventing erroneous insertion of test leads
- New Functions for Yokogawa Middle Class DMMs
- Current direct reading function – using clamp sensor (optional)
- Low-pass Filter (LPF)
- Logging-mode memory for 1600 data
- USB communication (Optional communication package)
- Closed Case Calibration
- 3-year Warranty
Yokogawa TY710 – Digital Multimeter
- Bandwidth: 20 kHz
- Basic accuracy 0.020%
- True RMS measurement
- New Functions for Electronic and Industrial Use
- Simultaneous measurement and display of DC and AC
- Switchable RMS/MEAN detection
- Low-pass Filter (LPF)
- AC50mV range
- Full Support for Data Management
- A large-capacity logging-mode memory (1,000 data)
- USB communication, application software
- 3-year Warranty
Yokogawa CW500 – Power Quality Analyzer
- Power line and Input Channel: 3 CH Voltage, 4 CH for Current Clamp Probe
- Capture irregularities in your power system such as voltage sags, dips, swells and log them conveniently to RAM or an SD card
- Log up to 50th orders of harmonics
- Vector display for convenient tracking of voltage/current phase relationships
- Quickly and easily shift between setting up the unit or viewing logged variables and waveforms
Yokogawa TY720 – Digital Multimeter
- Bandwidth: 100 kHz
- Basic accuracy 0.020%
- True RMS measurement
- New Functions for Electronic and Industrial Use
- Simultaneous measurement and display of DC and AC
- Switchable RMS/MEAN detection
- Low-pass Filter (LPF)
- AC50mV range
- Lo-Power resistance measurement
- Full Support for Data Management
- USB communication, application software
- A large-capacity logging-mode memory (10,000 data)
- 3-year Warranty
