Current and voltage probes allow the current and voltage to be measured without direct contact with the electrical system. This allows measurement to be done without disconnecting the electrical system.

Showing 1–8 of 15 results

AEMC JM800 Series – AC Current Probes

  • Current output: up to 3000AAC (continuous cycle for the full temperature range)
  • designed for use on DMMs, power and harmonic, meters, recorders or instruments with AC current ranges

AEMC K Series – DC/AC MicroProbes

  • Measures extremely low level DC from 100uA
  • Outputs signal proportional to total current (DC+AC)
  • Low noise
  • Ultra-compact size and non-contact clamp-on convenience
  • Simple plug-in operation
  • Designed for use with digital multimeters and oscilloscopes
  • No range or mode (AC/DC) switching required
  • CE mark

AEMC LM Series – AC Current Probes

  • Clamping diameter 0.63″ (16mm)
  • Measurement range from 0.1 to 200 Amps
  • Over range up to 350 Amps continuous
  • 1ma/A output (model LM102)
  • 1mv/A output (model LM103)
  • Clothes pin design allows access to tight places
  • Frequency response from 48 to 10kHz
  • Arrow marker clearly assist in proper orientation for power measurement applications

AEMC MD Series – AC Current Probes

  • 600A range with mA or mV output
  • Unique hook-shaped jaws that enable the user to “pry” into or “hook” onto cables
  • Maximum conductor size is 2 x 500kcmil
  • Works as a traditional current transformer with ratio of 1000:1
  • AC/DC outputs available

AEMC MH60 – AC/DC Current Probe

  • Clamping diameter 1.02″ (26mm)
  • Measurement range from 0.5 to 140 Amps AC, 100 Amps Dc
  • Measure AC+DC signals
  • 10mV/A output
  • Automatic compensation for earth’s magnetic influence
  • Battery power (8 hour battery life) or USB continuous
  • Frequency response from DC to 1 MHz
  • Selectable 3 or 30kHz filter selection
  • Push button zero adjust
  • LED indicators for power, overload and filter selection
  • UL 94 V2 self-extinguishing case material

AEMC MiniFlex Series – Flexible Sensors

  • Measure from 0.5 to 3000Arms
  • Accuracy 1% of Reading +- from 0.2 to 0.25A
  • TRMS measurements when connected to a TRMS instrument
  • No core saturation or damage if overloaded
  • Low phase shift for power measurements
  • Measures only AC
  • High frequency models available for oscilloscopes
  • Excellent linearity
  • CE Mark

AEMC MN Series – AC Current Probes

  • “Clothes pin” shape makes them ideal for use in tight areas, such as breaker panels, controller panels, or outlets
  • Jaw opening accommodates conductors up to 0.39″ diameter
  • Measurements from 1mA to 150AAC
  • Designed for DMMs, loggers, recorders, and oscilloscopes

AEMC MN100 Series – AC Current Probes

  • Measurement range of 1mA to 150AAC
  • Jaw opening of 0.78″
  • Accommodates conductors up to 0.47″ in diameter
  • Ergonomic design and easy operation
  • Compact size accommodates hard to reach locations
  • Low phase shift for power measurements
  • Available with mV or mA output signals
  • Constructed with UL94VO flame retardant material
  • Designed for DMMs, recorders, loggers, and oscilloscopes