Electro-Meters offers a wide catalog of meter relays and controllers that provide you with the solution you need for your electronic equipment. A meter relay uses a switched output to control a process or operate an external device. We offer a variety of panel meters and controllers to perform today’s control applications, including temperature displays, digital panel meters, and bargraph meters. We offer models from the Hsian Cheng Electric Corporation, Texmate, and Yokogawa lines of products, with digital panel meters that are cULus approved. If you need any assistance in finding the right meter relay or controller for your needs, contact our team of experts at Electro-Meters today.

Showing all 25 results

Texmate DI-602AE & DI-602AT5C Tiger Series – Programmable Meter Controllers

  • 96x48mm
  • 6 Digit x 2 Display Digital Controllers
  • Red, green, or superbright red 7-segment, 0.56” high LEDs with full support for seven segment alphanumeric text.
  • Range: -199999 to 999999
  • Modular construction
  • Front panel controls
  • Up to 4 “smart” input channels

Texmate DI-50E & DI-50T Tiger Series – Programmable Meter Controllers

  • 96x48mm
  • 5 Digit Display Controllers
  • Red, green, or superbright red 7-segment, 0.56” high LEDs with full support for seven segment alphanumeric text
  • Range: -19999 to 99999 counts
  • Modular construction
  • Front panel controls
  • Up to 4 “smart” input channels

Texmate DL-40JANUS Leopard Series – Digital Panel Meters

  • 96x48mm
  • 4 Digit LED display
  • Range: -1999 to 9999
  • Three-button programming from the front panel
  • Three front panel selectable ranges.
  • Four-level brightness control of digital display, and setpoint LEDs.
  • Three programmable setpoints.
  • Relay activation can be selected to occur above (HI) or below (LO) each setpoint.
  • Hysteresis setting for all three setpoints. Delay on make and delay on break for SP1 and SP2.
  • Peak and Valley. View and Reset.

Hsiang Cheng SMDA – DC Current Meter Relays

  • Multi-turn Potentiometer setting
  • Dual Hi & Lo setting
  • Wide input parameters & ranges
  • Output with adjustable time delayer
  • 4 digits up to 9999 counts

Hsiang Cheng SMDV – Voltage Meter Relays

  • Multi-turn Potentiometer setting
  • Dual Hi & Lo setting
  • Wide input parameters & ranges
  • Output with adjustable time delayer
  • 4 digits up to 9999 counts

Hsiang Cheng SME – DC Process Relay Meters

  • Multi-turn Potentiometer setting
  • Dual Hi & Lo setting
  • Wide input parameters & ranges
  • Output with adjustable time delayer
  • 4 digits up to 9999 counts

Hsiang Cheng SMT – Temperature Relay Meters

  • Multi-turn Potentiometer setting
  • Dual Hi & Lo setting
  • Wide input parameters & ranges
  • Output with adjustable time delay
  • 4 digits up to 9999 counts

Hsiang Cheng SMV – AC Voltage Meter Relays

  • Multi-turn Potentiometer setting
  • Dual Hi & Lo setting
  • Wide input parameters & ranges
  • Output with adjustable time delayer
  • 4 digits up to 9999 counts

Texmate BL-40 Leopard Series – Digital Relay Meters

  • 96x24mm
  • 4 Digit Display
  • Range: -1999 to 9999
  • Three-button programming from the front panel
  • Three front panel selectable ranges
  • Four-level brightness control of digital display, and setpoint LEDs
  • Three programmable setpoints
  • Relay activation can be selected to occur above (HI) or below (LO) each setpoint
  • Hysteresis setting for all three setpoints. Delay on make and delay on break for SP1 and SP2
  • Peak and Valley. View and Reset
  • Auto-sensing AC/DC Power Supply. For Voltages Between 85-265VAC/95-300VAC (PS1) or 15-48VAC/10-72VDC
  • One 9 amp form C and one 4 amp form A relay, or up to three 4 amp form A relays are available

Texmate BL-B51D40 Leopard Series – Bargraph Meters

  • 96x24mm
  • Range: -1999 to 9999
  • 4 Digit LED display
  • 51 segment bargraph
  • Bargraph center zero function.
  • Four programmable setpoints.
  • Setpoint 1 has delay-on-make and delay-on-break plus a special “pump on pump off” mode that creates a Hysteresis Band between SP1 and SP2.
  • Relay activation can selected to occur above or below (Lo) each setpoint.
  • Digital display blanking.
  • Decimal point setting.
  • Four-level brightness control of the bargraph digital display.

Texmate DI-503E & DI-503T Tiger Series – Programmable Meter Controller

  • 96x48mm
  • 5 Digit x3 Display Controllers
  • 3 displays with red, green, or superbright red 7-segment, 0.31” high LEDs
  • Range: -19999 to 99999 counts
  • Modular construction
  • Front panel controls
  • Up to 4 “smart” input channels

Texmate DI-50EAN6 & DI-50TAN6 Tiger Series – Programmable Meter Controllers

  • 96x48mm
  • 5 Digit Display Controllers
  • Red, green, or super-bright red 7-segment, 0.31” high LEDs with full support for seven segment alphanumeric text.
  • Range: -19999 to 99999 counts
  • 6 light bar annunciators to illuminate application specific text.
  • Modular construction
  • Front panel controls

Texmate DI-50EB51 & DI-50TB51 Tiger Series – Programmable Meter Controllers

  • 96x48mm
  • 5-digit Display Controllers
  • Red or green 7-segment, 0.31” high LEDs with full support for seven segment alphanumeric text.
  • Range: -19999 to 99999 counts
  • 6 LED setpoint annunciators
  • 51 segment bargraph
  • Modular construction

Texmate DI-60AE & DI-60AT5C Tiger Series – Programmable Meter Controllers

  • 96x48mm
  • 6-Digit Alphanumeric Display Controllers
  • Red, green, or superbright red 7-segment, 0.56” high LEDs with full support for seven segment alphanumeric text.
  • Range: -199999 to 999999
  • Modular construction
  • Front panel controls
  • Up to 4 “smart” input channels

Texmate DI-60XE & DI-60XT Tiger Series – Programmable Meter Controllers

  • 96x48mm
  • 6-Digit LCD Controllers
  • 7-segment, 0.56” high LCD with full support for seven segment alphanumeric text.
  • Range: -199999 to 999999
  • Modular construction
  • Front panel controls
  • Up to 4 “smart” input channels

Texmate DI-802XAE & DI-802XAT Tiger Series – Programmable Meter Controllers

  • 96x48mm
  • 8-Digit LCD Controllers x 2 5.5mm Displays
  • Modular construction
  • Range: -9999999 to 99999999
  • Front panel controls
  • Up to 4 “smart” input channels

Texmate DL-40RPM Leopard Series – Speed Measuring Digital Panel Meters

  • 96x48mm
  • 4 Digit LED display
  • Three-button programming from the front panel
    (UP, DOWN and PROGRAM buttons).
  • Three front panel selectable ranges.
  • Front panel selectable four-level brightness control of digital display, and setpoint LEDs.
  • Four programmable setpoints.
  • Relay activation can be selected to occur above (HI) or below (LO) each setpoint.
  • Hysteresis setting for all three setpoints. Delay on make and delay on break for SP1 and SP2.
  • Peak and Valley. View and Reset.
  • Optional plug-in relay or SSR Output Modules

Texmate FI-B101D50E & FI-B101D50T Tiger Series – Programmable Meter Controllers

  • 144x36mm
  • 7-segment, 8mm high LEDs with full support for alphanumeric text
  • 101 segment red, green or tricolor bargraph can display signal from any four channels or the result of a processed input signal
  • 6 LED annunciators
  • Range: -19999 to 99999

Texmate FL-B101D40 Leopard Series – Bargraph Meters

  • 144x36mm
  • 101 Segments
  • 4 Digit 0.32″ LEDs
  • Range: -1999 to 9999
  • The bargraph can display, full scale, any desired portion of the digital reading.
  • Bargraph center zero function.
  • Four programmable setpoints with adjustable Hysteresis.
  • Setpoint 1 has delay-on-make and delay-on-break plus a special “pump on pump off” mode that creates a Software Features Hysteresis Band between SP1 and SP2.
  • Relay activation can be selected to occur above (hi) or below (Lo) each setpoint.
  • Digital display blanking.
  • Decimal point setting.
  • Four-level brightness control accessed by the button and adjusted by the button.

Texmate FL-B101Q Leopard Series – Bargraph Meters

  • 144×36 mm
  • 101 segment bargraph
  • Bargraph center zero function.
  • Four programmable setpoints.
  • Relays activation can be selected to occur above (HI) or below (LO) each setpoint.
  • Decimal point setting.

Texmate FL-B202Q Leopard Series – Bargraph Meters

  • 144×36 mm
  • The two 101 segment bargraph can be independently scaled.
  • Bargraph center zero function.
  • Four programmable setpoints.
  • Relays activation can be selected to occur above (HI) or below (LO) each setpoint.
  • Decimal point setting.

Texmate GI-50E & GI-50T Tiger Series – Programmable Meter Controllers

  • 144x72mm
  • 5-Digit Controllers
  • Red, green, or superbright red 7-segment, 1” high LEDs
  • Range: -19999 to 99999
  • Modular construction
  • Front panel controls
  • Up to 4 “smart” input channels

Texmate GI-50EB101 & GI-50TB101 Tiger Series – Programmable Meter Controllers

  • 144x72mm
  • 5 Digit Controllers
  • 101 segment bargraph
  • Red, green, or superbright red 7-segment, 0.56” high LEDs with full support for seven segment alphanumeric text.
  • Range: -19999 to 99999
  • Modular construction
  • Front panel controls
  • Up to 4 “smart” input channels

Texmate PL-B101D40 Leopard Series – Bargraph Meters

  • 144×24 mm
  • 101 segments
  • 4 Digit Display
  • Range: -1999 to 9999
  • The bargraph can display, full scale, any desired portion of the digital reading.
  • Bargraph center zero function.
  • Four programmable setpoints with adjustable Hysteresis.
  • Setpoint 1 has delay-on-make and delay-on-break plus a special “pump on pump off” mode that creates a Software Features Hysteresis Band between SP1 and SP2.
  • Relay activation can be selected to occur above (hi) or below (Lo) each setpoint.
  • Digital display blanking.
  • Decimal point setting.
  • Four-level brightness control accessed by the button and adjusted by the button.

Yokogawa UM33A – Digital Indicator with Alarms

  • Up to 9 Alarm outputs
  • Input correction function (PV bias, Polygonal Line approximation, Polygonal line bias)
  • A 14-segment, active (PV display color changing function) color LCD display. A five-digit, high-resolution display with alphabet capability
  • Programmable function keys
  • 65 mm depth The small depth enables the mounting in small panel
  • Dedicated LL50A Parameter Setting Software (sold separately)
  • Quick setting function Setting only the minimum necessary parameters for operation is possible
  • Communications
    • RS-485 (Modbus/RTU, peer to peer, coordinated, PC-Link)
    • Ladder