Siglent
Siglent SAP4000P Power Rail Probe
- Bandwidth 4 GHz
- Low frequency resistance 20 kΩ
- High frequency resistance 50 Ω
- Offset voltage range ±24 V
- Attenuation ratio 1.1:1
- Dynamic range ±600 mV
Siglent SAP5000D High Bandwidth Differential Active Probe
- Bandwidth: DC to over 5 GHz
- Single-ended input resistance: 10 kΩ
- Differential input resistance: 20 kΩ
- Gain: ÷10
- Differential input capacitance: 400 fF
- Input dynamic range: ±2.5 V
- Offset voltage setting range: ±12 V
- SAPBus interface for power and communication
Siglent SDG1000X – Arbitrary Waveform Generator
- Dual-channel design with bandwidth up to 60 MHz and amplitude up to 20 Vpp
- 150 MSa/s sampling rate, 14-bit vertical resolution, and 16 kpts waveform length
- Innovative EasyPulse technology reduces jitter in Pulse waveforms, offering wide range and extremely high precision in pulse width and rise/fall times adjustment
- Innovative TrueArb technology supports user-defined waveforms from 2 to 16 kpts and user-defined sample rate from 1 μSa/s to 30 MSa/s
Siglent SDG2000X – Arbitrary Waveform Generator
- Dual-channel design with a maximum bandwidth of 120 MHz
- Achieves a maximum output amplitude of 20 Vpp, ensuring high fidelity output with an 80 dB dynamic range
- Features a high-performance sampling system with a 1.2 GSa/s sampling rate and 16-bit vertical resolution, preserving waveform details
- Innovative TrueArb technology supports user-defined waveforms from 8 to 8 Mpts and user-defined sample rates from 1 μSa/s to 75 MSa/s
- Equipped with a large Touch Screen Display for convenient operation
- Enables easy combination of waveforms through a single output, including noise and arbitrary waveforms
Siglent SDG3000X – Arbitrary Waveform Generator
- Maximum output amplitude 20 Vpp
- Rich analog and digital modulation functions: AM, DSB-SC, FM, PM, FSK, ASK, PSK and PWM
- Sweep and Burst functions
- Harmonic function
- Waveform Combining function
- 196 built-in arbitrary waveforms
- Built-in WebServer supports instrument control via web browser
- 7-inch display touch screen
Siglent SDG6000X – Arbitrary Waveform Generator
- Dual-Channel design with a maximum bandwidth of 500 MHz
- Achieves a maximum output amplitude of 20 Vpp, ensuring high fidelity output with an 80 dB dynamic range
- Features a high-performance sampling system with a sampling rate of 2.4 GSa/s and 16-bit vertical resolution
- Incorporates EasyPulse circuitry to reduce jitter and enhance pulsed performance
- Optional capability to generate baseband and IF IQ modulated waveforms
Siglent SDG7000A – Arbitrary Waveform Generator
- Dual-channel differential/single-ended output, 16-bit LVDS/LVTTL digital bus outputs (optional)
- High-performance sampling system with 5 GSa/s sample rate and 14-bit vertical resolution
- 1 GHz maximum bandwidth
- Generates arbitrary waveform with sample rates of 0.01 Sa/s ~ 2.5 GSa/s
- Memory depth of 512 Mpts
- Segmented editing/playback functions
- Generates vector signals with up to 500 MS/s symbol rate
Request a demo
Siglent SDG800 – Arbitrary Waveform Generator
- Advanced DDS technology, 125 MSa/s sampling rate, 14-bit vertical resolution
- Single channel output, 5 standard waveforms, 46 built-in arbitrary waveforms (including DC)
- Complete modulation functions: AM, DSB-AM, FM, PM, FSK, ASK, PWM, linear/logarithmic sweep, and burst
Siglent SDL1000X/X-E Programmable DC Electronic Load
- Four static modes and Dynamic mode: CC/CV/CR/CP
- Minimum readback resolution: 0.1 mV, 0.1 mA
- Adjustable current rise time range: 0.001 A/us to 2.5 A/us
Siglent SDS1000CML+ – Digital Oscilloscope
- Models available in 100 MHz bandwidth
- Real-time sampling rate up to 1 GSa/s, Equivalent-time sampling rate up to 50 GSa/s
- Memory Depth up to 2 Mpts
- Trigger types: Edge, Pulse, Video, Slope, Alternate
- Waveform math functions: Addition (+), Subtraction (-), Multiplication (*), Division (/), and FFT
- 6-digit frequency counter
Siglent SDS1000DL+ – Digital Oscilloscope
- Models available in 50 MHz bandwidth
- Real-time sampling rate up to 500 MSa/s, Equivalent-time sampling rate up to 50 GSa/s
- Memory Depth up to 32 kpts
- Trigger types: Edge, Pulse, Video, Slope, Alternate
- Waveform math functions: Addition (+), Subtraction (-), Multiplication (*), Division (/), FFT
- 6-digit frequency counter
Siglent SDS1000X HD – Digital Oscilloscope
- Bandwidth up to 200 MHz
- 12-bit high resolution
- Real-time sampling rates of up to 2 GSa/s
- Record length up to 100 Mpts
- Capture waveforms at an impressive rate of up to 500,000 wfm/s
- 10.1″ touch display
- 2/4 analog channels and 16 digital channels
Buy Online
Request a demo
Siglent SDS1000X-E – Digital Oscilloscope
- Available in 100 and 200 MHz bandwidth models
- 2 or 4 analog channels; optional 16 logic/MSO available on 4-channel configuration only
- Real-time sampling rate up to 1 GSa/s
- Math co-processor enhances front panel operation
- Waveform capture rate up to 100,000 wfm/s (normal mode) and 400,000 wfm/s (sequence mode)
- Record length extends up to 14 Mpts with 1 Mpt FFT
- Includes on-screen Bode plot and web-browser control (standard on 4-channel configuration only)
Siglent SDS1000X-U – Digital Oscilloscope
- Bandwidth: 100 MHz
- Real-time sampling rate: Up to 1 GSa/s
- Record length: Up to 14 Mpts
- Serial bus triggering and decoder support for protocols I2C, SPI, UART, CAN, LIN
- Advanced measurements on full memory (14 Mpts)
- Large 7-inch TFT-LCD display with 800 * 480 resolution
Siglent SDS2000X HD – Digital Oscilloscope
- Bandwidth up to 350 MHz (upgradable to 500 MHz)
- 12-bit high resolution
- Real-time sampling rates of up to 2 GSa/s
- Record length up to 200 Mpts
- Capture waveforms at an impressive rate of up to 500,000 wfm/s
- 10.1″ touch display
- 4 analog channels and 16 digital channels
Siglent SDS2000X Plus – Digital Oscilloscope
- Available models: 100 MHz, 200 MHz, and 350 MHz (upgradeable to 500 MHz)
- Real-time sampling rate: Up to 2 GSa/s
- Record length: Up to 200 Mpts
- Serial bus triggering and decoder: Supports I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S, and MIL-STD-1553B
- Features 10-bit mode, Vertical, and Horizontal Zoom
- Capacitive touch screen: Supports multi-touch gestures
Siglent SDS2000X-E – Digital Oscilloscope
- Models available in 200MHz and 350MHz bandwidth
- Real-time sampling rate reaches up to 2 GSa/s
- Utilizes the latest SPO technology
- Waveform capture rate: 110,000 wfm/s (normal mode) and 400,000 wfm/s (sequence mode)
- Supports 256-level intensity grading and color display modes
- Equipped with a 7-inch TFT-LCD display and 10 one-button menus
- Record length extends up to 28 Mpts
- Features a digital trigger system
- Includes Bode plot functionality
Siglent SDS3000X HD – Digital Oscilloscope
- Bandwidth up to 1 GHz
- 12-bit high resolution
- Real-time sampling rates of up to 4 GSa/s
- Record length up to 400 Mpts
- Capture waveforms at an impressive rate of up to 890,000 wfm/s
- 10.1″ touch display
- 4 analog channels and 16 digital channels
Siglent SDS5000X – Digital Oscilloscope
- Bandwidth up to 1 GHz
- Real-time sampling rates of up to 5 GSa/s
- Record length up to 250 Mpts
- Capture waveforms at an impressive rate of up to 500,000 wfm/s
- 10.1″ touch display
- 2/4 analog channels and 16 digital channels
Siglent SDS6000A – High-Speed Digital Oscilloscope
- Bandwidth up to 2 GHz, featuring a 8-bit ADC resolution
- Real-time sampling rates of up to 5 GSa/s
- Record length up to 500 Mpts
- Capture waveforms at an impressive rate of up to 750,000 wfm/s
- 12.1″ touch display
- 4 analog channels and 16 digital channels
Siglent SDS6000L – Low Profile Digital Oscilloscope
- Bandwidth up to 2 GHz
- Real-time sampling rates of up to 5 GSa/s
- Record length up to 500 Mpts
- Capture waveforms at an impressive rate of up to 750,000 wfm/s
- 8/4 analog channels and 16 digital channels
Siglent SDS7000A – High-Speed Digital Oscilloscope
- Bandwidth up to 4 GHz, featuring a 12-bit ADC resolution
- Real-time sampling rates of up to 20 GSa/s
- Record length up to 1 Gpts
- Capture waveforms at an impressive rate of up to 1,000,000 wfm/s
- 15.6″ touch display
- 4 analog channels and 16 digital channels
Request a demo
Siglent SDS800X HD – Digital Oscilloscope
- Bandwidth up to 200 MHz
- 12-bit high resolution
- Real-time sampling rates of up to 2 GSa/s
- Record length up to 100 Mpts
- Capture waveforms at an impressive rate of up to 500,000 wfm/s
- 7″ touch display
- 2/4 analog channels and 16 digital channels
Siglent SHA850A Handheld Spectrum & Vector Analyzer
- Standard Spectrum Analyzer (SA) and Cable and Antenna Tester (CAT) modes, with optional Vector Network Analyzer (VNA) mode
- Frequency Range: 9 kHz to 7.5 GHz
- Displayed Average Noise Level (Typ.): -165 dBm/Hz
- Single-Sideband (SSB) Phase Noise (Typ.): -104 dBc/Hz @1 GHz, 10 kHz offset
- Typical Dynamic Range in VNA mode: 114 dB
- Measurement Options: Channel power, Adjacent Channel Power Ratio (ACPR), Harmonics, and Third Order Intercept (TOI)
- Features: Standard preamplifier, 8.4” touch screen, up to 4 hours of working time
- Additional Capability: GPS location and logging
Siglent SHN900A Portable Vector Network Analyzer
- 2 port S-parameters, Time Domain, and Pulse Measurements
- Standard VNA and cable test mode with optional SA mode
- Frequency Range: 30 kHz~26.5 GHz
- Range of IFBW: 10 Hz~3 MHz
- Dynamic Range: 110 dB (typ.)
- Handheld instrument with 4 hour battery life and standard bias-Tee
- Standard GPS, Time and Location Information Saving
- Enhanced TDR with eye diagram simulation option
Siglent SHS1000X – Handheld Oscilloscope
- Isolation voltage: CATIII 600 Vrms, CATII 1000 Vrms
- Combines oscilloscope, serial trigger and decoder, spectrum analysis, data logger, and multimeter functions into a convenient and portable design
- Available in 100 MHz or 200 MHz bandwidth models
- Sample rate: 1 GSa/s (single-channel) or 500 MSa/s (two-channels)
- Record length: Up to 12 Mpts
- Includes hardware-based true RMS multimeter
- IP51 dust/water resistance certified
Siglent SHS800X – Handheld Oscilloscope
- Combines oscilloscope, serial trigger and decoder, spectrum analysis, data logger, and multimeter functions in a portable design
- Available in 100 MHz or 200 MHz bandwidth models
- Sampling rate: 1 GSa/s (single-channel) or 500 MSa/s (two-channels)
- Record length: Up to 12 Mpts
- Allows waveform recording for up to 22 hours
- IP51 dust/water resistance certified
Siglent SNA5000A Vector Network Analyzer
- Frequency Range: 9 kHz – 8.5 GHz and 100 kHz – 26.5 GHz
- Frequency Resolution: 1 Hz
- Output Level Setting Range: -55 dBm to +10 dBm
- Dynamic Range: 125 dB
- Supported Ports: 2/4 ports for S-parameters, Balance Measurements, and Time Domain Analysis
- Measurement Capabilities: Q-factor, bandwidth, and Insertion Loss
- Power Source Calibration Compatibility: Compatible with R&S NRPxxA/AN and Keysight U2000A/B series USB power meters
- ECal Kits Compatibility: Compatible with ECal kits from several manufacturers
Request a demo
Siglent SNA6000A Vector Network Analyzer
- Frequency Range: 100 kHz – 13.5 GHz and 100 kHz – 26.5 GHz
- Frequency Resolution: 1 Hz
- Output Level Setting Range: -55 dBm to +10 dBm
- Dynamic Range: 135 dB
- Supported Ports: 2/4 ports for S-parameters, Balance Measurements, and Time Domain Analysis
- Measurement Types: Scattering parameter measurement, differential parameter measurement, receiver measurement, time-domain parameter analysis, limit test, ripple test, impedance conversion, fixture simulation, adapter removal/insertion, spectrum analysis frequency offset, scalar mixer measurement, pulse measurement, Material Measurement
- ECal Kits Compatibility: Compatible with ECal kits from several manufacturers
- 12.1″ touch screen
Siglent SPD1000X Programmable DC Power Supply
-
Single channel high-precision programmable voltage output:
- SPD1168X: 16 V / 8 A, total power up to 128 W
- SPD1305X: 30 V / 5 A, total power up to 150 W
- Stable, reliable, Low ripple and noise: ≤ 350 uVrms/3 mVpp; < 2 mArms
- Fast transient response time: < 50 μs
- 5-digit Voltage, 4-digit Current Display, Minimum Resolution: 1 mV / 1 mA
- 2.8-inch true color TFT-LCD 240×320 display
- 2 types of output modes: Two-wire output mode, 4-wire compensation output mode, Max. compensation 1 V
Siglent SPD3303C Programmable DC Power Supply
- 3 independent high precision outputs: Two 32 V / 3.2 A, One 2.5 V / 3.3 V / & 5 V / 3.2 A, totaling 220 W power
- 4-digit voltage and 3-digit current display, with minimum resolution of 10 mV and 10 mA
- Three output modes available: independent, series, and parallel
- Compatible design for 100/120/220/230 V power grids, catering to various power requirements
Siglent SPD3303X / SPD3303X-E Programmable DC Power Supply
- 3 independently controlled and isolated outputs: Two 32 V/3.2 A, one 2.5 V / 3.3 V / 5 V / 3.2 A × 1, totaling 220 W
- Voltage displayed with 5 digits, current with 4 digits, Minimum Resolution: 1 mV/1 mA (SPD3303X)
- Timing function for programmed output steps
- 4.3-inch true color TFT-LCD display with resolution of 480 x 272
- 3 types of output modes: independent, series (max 60 V), and parallel (max 6.4 A)
Siglent SPD4000X – Programmable Linear DC Power Supply
- Four independent outputs
- Rated output power: 240W, 285W, 400W
- 5-digit voltage and current display with a minimum resolution of 1mV and 1mA
- Clear graphical interface with waveform and timer display modes
- Supports remote voltage compensation sense function
Siglent SPS5000X Wide Range Programmable Switching DC Power Supply
- Rated Output Voltage: 40V, 50V, 80V, 160V
- Rated Output Power: 180W, 360W, 720W, 1080W
- Wide range of output voltage and current, providing high efficiency power supply
- Selection between CV and CC priority modes for better protection of equipment under test
- Load transient recovery time (Load change from 50~100%): <1ms
- Adjustable slew rate of output voltage and current
- Setting and readback resolution: 1 mV, 1 mA
Siglent SSA3000X – Spectrum Analyzer
- All-Digital IF Technology
- Frequency Range from 9 kHz to 2.1/3.2 GHz
- -161 dBm/Hz Displayed Average Noise Level (Typ.)
- -98 dBc/Hz @10 kHz Offset Phase Noise (1 GHz, Typ.)
- Total Amplitude Accuracy < 0.7 dB
- 1 Hz Minimum Resolution Bandwidth (RBW)
- Tracking generator (TG) is currently included at no charge
Siglent SSA3000X Plus – Spectrum Analyzer
- Frequency Range: 9 kHz to 1.5 GHz / 2.1 GHz / 3.2 GHz / 7.5 GHz
- Displayed Average Noise Level (Typ.): -165 dBm/Hz
- Offset Phase Noise (Typ.): -98 dBc/Hz @10 kHz Offset (1 GHz)
- Total Amplitude Accuracy: < 0.7 dB
- Screen: 10.1-inch Multi-Touch
- Input Support: Mouse and Keyboard
- Remote Control: Web Browser Remote Control on PC and Mobile Terminals
- File Operation: Supported
Siglent SSA3000X-R – Real-Time Spectrum Analyzer
- Spectrum Analyzer Frequency Range from 9 kHz up to 3.2 GHz / 5.0 GHz / 7.5 GHz
- Now with VNA and DTF functions, free!
- -165 dBm/Hz Displayed Average Noise Level (Typ.)
- -98 dBc/Hz.@10 kHz Offset Phase Noise (1 GHz, Typ.)
- Level Measurement Uncertainty < 0.7 dB (Typ.)
- Up to 40 MHz Real Time Analysis Bandwidth
- Web Browser Remote Control on PC and Mobile Terminals and File Operation
Siglent SSA5000A – Spectrum Analyzer
- Frequency Range from 9 kHz up to 13.6 /26.5 GHz
- -165 dBm/Hz Displayed Average Noise Level (Typ.)
- -105 dBc/Hz@1 GHz,10 kHz offset SSB Phase Noise (Typ.)
- 25 MHz/40 MHz Realtime Spectrum Analysis Bandwidth
- Analog Modulation Analysis and Vector Digital Modulation Analysis
- Channel power, ACPR, OBW, Harmonics, and TOI measurement option
- Web Browser for easy Remote Control over LAN
Siglent SSG3000X – RF Signal Generator
- Frequency ranging from 2.1 GHz to 3.2 GHz
- Peak output level reaching up to +20 dBm on average
- Output level spanning from -110 dBm to +13 dBm
- Precise level accuracy of ≤0.7 dB on average
- Support for standard AM, FM, PM, and pulse modulation
- Option for Pulse Train Generator included
Siglent SSG5000A – RF Signal Generator
- Frequency range extends up to 13.6 GHz / 20 GHz
- Offers a frequency setting resolution of 0.001 Hz
- Level setting range spans from -130 dBm to 25 dBm
- Typical Phase Noise is -120 dBc/Hz @ 1 GHz, 20 kHz offset
- Typical Level error is ≤ 0.7 dB
- Supports standard AM, FM, PM, and pulse modulation
- Option for single pulse, double pulse, and pulse train generator available
Siglent SSG5000X – RF Signal Generator
- Frequency up to 4 GHz/6 GHz
- 0.001 Hz frequency setting resolution
- Maximum output power up to +26 dBm (typ.)
- Phase Noise: -120 dBc/ Hz @ 1 GHz, 20 kHz offset (typ.)
- Single pulse, double pulse and pulse train generator (option)
Siglent SSG6000A – Microwave Analog Signal Generator
- Advanced DDS technology, 125 MSa/s sampling rate, 14-bit vertical resolution
- Single channel output, 5 standard waveforms, 46 built-in arbitrary waveforms (including DC)
- Complete modulation functions: AM, DSB-AM, FM, PM, FSK, ASK, PWM, linear/logarithmic sweep, and burst
Siglent SSU5000A Mechanical Switch
- Maximum frequency: 18 GHz / 26.5 GHz / 50 GHz
- Configurations: 1 to 4 SPDT switches or 1 to 2 SP6T switch configurations
- SCPI Controllable via VISA and EasySSU software
- USB Connectivity
- Size: W×H×D=153×62.4×137.5mm
- RF connector: SMA female or 2.4mm female
Siglent SSU5000A Switch Matrix
- Maximum Frequency Options: 9 GHz / 26.5 GHz
- Maximum Number of Input Ports: 4
- Maximum Number of Output Ports: 24
- RF Connector: 3.5mm female
- Supports a simplified multi-port calibration algorithm
- Interface Options: LAN, USB Device, Direct Control (in), Direct Control (out)
Siglent SVA1000X – Spectrum & Vector Analyzer
- Vector Network Analysis: Now included as standard, covering frequencies from 100 kHz to 3.2 / 7.5 GHz
- Distance-to-fault: Optional feature
- Spectrum Analyzer mode: Frequency range extends from 9 kHz to 1.5 / 3.2 / 7.5 GHz
- Displayed Average Noise Level (Typ.): -156 dBm/Hz / -161 dBm/Hz / -165 dBm/Hz
- Offset Phase Noise (Typ.): -99 dBc/Hz @10 kHz Offset (1 GHz)
- Minimum Resolution Bandwidth (RBW): 1 Hz
Siglent SDM4065A Series – Digital Multimeter
- Real 6½ digits readings resolution (2,200,000 counts)
- Up to 50k rdgs/s of measurement speed
- 512 MB RAM, capable of saving up to 2M readings for caching
- Equipped with EasyDMM-X host computer control and sampling software
- 5-inch true color TFT-LCD display
