Yokogawa AQ6360 – Telecom Optical Spectrum Analyzers

  • Wavelength range: 1200 to 1650 nm
  • Wavelength resolution: 0.1 to 2 nm
  • High wavelength accuracy: ±0.02 nm
  • High dynamic range: 55 dB
  • Wide measurement range: +20 to −80 dBm

Yokogawa AQ6370E – Telecom Optical Spectrum Analyzers

  • Wavelength Range: 600 nm to 1700 nm
  • Wavelength Accuracy: ±0.008 nm (typical)
  • Wavelength Resolution: 0.02 nm
  • Close-in Dynamic Range: 78 dB (typical)
  • Level Range: +20 to -90 dBm
  • Up to 2x faster measurement with SMSR mode
  • Sharper spectrum measurement with HCDR mode
  • Large touchscreen LCD for easy operation and data visualization

Yokogawa WT5000 – Precision Power Analyzers

  • Sample Rate: 10 MS/s
  • Power Bandwidth: 1 MHz
  • Resolution: 18 bit
  • Elements: 1-7
  • Accuracy: 0.03%
  • 10.1″ touchscreen

Request a demo

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    Yokogawa 2553A – Precision DC Calibrator

    • Intuitive operation: Dials and switches are provided for each digit and function, and traditional 7-segment LEDs provide clear visibility
    • High resolution: 5.5 digits ±120000 count output resolution
    • DC Voltage: ±10 mV to ±30 V
    • DC Current: ±1 mA to ±100 mA
    • Voltage accuracy: +/- 75 ppm
    • Current accuracy: +/- 120 ppm
    • Temperature calibration: 10 types of thermocouples including K, T, E, and J types
    • User-defined thermocouple and RTD (PT1000) calibration: Generates various types of thermocouple and RTD by extrapolating the relation between voltage and temperature

    Yokogawa LS3300 – AC Power Calibrator

    • High Accuracy:
      • AC Voltage: ±350 ppm
      • AC Current: ±450 ppm
      • AC Power: ±450 ppm
    • Phase Accuracy: ±0.03˚ at 50/60 Hz
    • High Stability:
      • AC voltage: ±50 ppm/h
      • AC current: ±50 ppm/h
      • AC power: ±100 ppm/h
    • Wide Generation Range:
      • AC voltage: 10 mV to 1250 V
      • AC current: 0.3 mA to 62.5 A
      • Frequency: 40 to 1200 Hz

    Yokogawa 2558A – Precision AC Standard

    • Intuitive operation: Dials and switches are provided for each digit and function, and traditional 7-segment LEDs provide clear visibility
    • 6 voltage ranges (100 m/1/10/100/300/1000 V)
    • 4 current ranges (100 m/1/10/50 A)
    • Sweep (Voltage/Current/Frequency)
    • Output Divider: Linearity tests can be simply performed by dividing the output into steps. For example, a setting of 4 will generate steps of 25, 50, 75 and 100% of the set output value.
    • % Deviation readout
    • Common current output terminals: The same output terminals are used for all current ranges. Test times are therefore reduced by avoiding the need to change the wiring for meters which have different ranges.
    • Wide frequency range-: 40 to 1000 Hz (Frequency accuracy : ±50 ppm)

    Request a demo

      This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

      Yokogawa 2560A – Precision DC Calibrator

      • Intuitive operation: Dials and switches are provided for each digit and function, and traditional 7-segment LEDs provide clear visibility
      • High resolution: 5.5 digits ±120000 count output resolution
      • Accuracy:
        • DC voltage: ±50 ppm
        • DC current: ±70 ppm
      • Resolution:
        • 5.5 digits, ±120000 count display
        • 6.5 digits, ±1200000 count display – high res.
      • Direct readout of the deviation
      • Digital display of output
      • Output Divider
      • Sweep: With a flick of a switch, the output can be swept within the source range with sweep times of 8, 16, 32 or 64 seconds.
      • High stability
        • DC voltage: ±10 ppm/h
        • DC current: ±20 ppm/h

      Yokogawa 30032A – Clamp-on Tester

      • Leakage current measurement range from 3mA to 60A
      • Diameter of measurable conductor: 40 mm max.
      • Easier and clear display

      Yokogawa AQ1100 – Multi-function Optical Loss Test Sets

      • 5.7 inch color LCD for easy viewing
      • Multi-core fiber measurement with a pair set
      • Optional PING Test function and Visible light Source
      • Optical Power Meter Selections
        • Standard: +10 to -70dBm
        • High power: +27 to -50dBm
        • PON : 1490/1550nm Parallel measurement
      • Light Sources (3 models)
        • SM1310/1550nm
        • SM1310/1550/1625nmMM850/1300nm and SM1310

      Yokogawa AQ2170/2170H – Portable Optical Power Meters

      • AQ2170 – +10 dBm max. power (Standard)
      • AQ2170H – +26 dBm max. power (High Power)
      • Up to 7 working wavelengths
      • Compact and lightweight
      • Versatile data storage and transfer large memory capacity stores up to 999 measurement results
      • Auto switching of measurement wavelength