Eagle Signal Controls
Test and Measurement Instrumentation
- Timers & Totalizers
 |
 |
- Time Totalizers/ Elapsed Time Meters
- Reset Timer
- Programmable Timers
- Single Function Timers
- Count Totalizers
- Position Indicators
- Preset Counters
- Rate Meters
//www.danaherspecialtyproducts.com/Eagle_Signal/Products_and_Solutions/.com
- Timers
- Totalizer | Elapsed Time Meters
- Reset Timers
- Programmable
- Percent Timers
Veeder-Root [1/8DIN] C628 Series, Digital Timers and Elapsed Time Meters
The C628 Elapsed Timer has a definable set value at which an output will activate. The unit can be programmed to operate in a cumulative or single input function mode. Measures time in: in seconds, minutes, hours, minutes & seconds, or hours & minutes, counting up or down.
A103 Series [72 x 36 mm] , Digital Time Totalizers and Elapsed Time Meters
Field programmable c/w Up or Down timing and Interval or ON-delay operation. The A103 series also includes matching indicators for count-totalizing, timing, and rate metering, as well as preset-counters and Elapsed Time Meter models with a preset output for control
HK Series, Analog , Electro-mechanical Time Totalizers
Totalizes running time of electrically operated equipment…synchronous motor driven models for the display of hours, minutes, or seconds (Six digit-wheels)
HP5 CYCL-FLEX® Reset Timer
The HP5 CYCL-FLEX® series timer is a high quality, synchronous motor driven reset timer housed in the standard CYCL-FLEX® plug-in housing.
191 Series- AB4 MANUFLEX Digital Electro-mechanical Reset Time Meters
The Model 191 is a push-button start, motor driven timer with cycle progress pointer, double make-double break snap action switch and is used to energize a load for a preset time period.
Veeder-Root [1/8DIN] C628 Digital Reset Timers
1/8 DIN, timers with large LED display that changes color based on process status, such as, exceeding the count preset, providing an instant visual response to an alarm situation
B506 [1/16DIN] Digital Repeat Cycle, Standard Cycle and Performance Timers
Simple to set up and operate, the B506 utilizes an intuitive button-perdigit method for setpoint input and easy to follow scroll through menus for programming. IP65 rated front panel and a high degree of noise immunity
B856 [1/16DIN] Series- Multi-Function Programmable Time Meters
Easily programmable Digital Timers that perform any standard timing operation: On-Delay/Standard Start, Off-Delay/Reverse Start, Interval/One-Shot, Symmetrical Repeat Cycle, Delay-Interval
SX4 Series- Dual Output series and Dual Setpoint Series
The SX460 is a dual output timer with two independently programmable, timing interval setpoints.
B886 Series- Multi-Function Analog Time Meters
Low cost timing solution. Simple operation by turning a dial. Selectable time ranges provide preset times ranging from 0.06 seconds to 10 hours. Configurable to operate in On-Delay, Off-Delay, Interval, or Repeat Cycle timing modes.
CX200 Series- Multi-Function Programmable Cycle Time Meters
Time or count operation, time range, and standard or reverse start operation. Time or count setpoint and progress is displayed on the front of the unit by a 4 1/2 digit liquid crystal display with .5 inch digits
HQ4 Series- Adjustable timing as a percentage of overall cycle
The HQ4 series 48 percentage timer is an accurate, economical, enclosed percentage timer designed for use in applications where a repetitive ON time of a fixed cycle needs to be variable.
HQ9 Series- Adjustable timing as a percentage of overall cycle
The HQ9 offers accurate, efficient control for many industrial applications. These include motion control, electric heaters, ovens, program temperature controls, chemical feeding, and lubrication systems