• Eagle Signal Controls

Counters
HP5 Series- CYCL-FLEX® Reset Timer

The high quality timer that has become an industry standard… knob setpoint, cycle progress pointer, pilot light, and patented plug-in housing
Eagle Signal Controls HP5 Reset Timer Series

Features

  • 16 standard time ranges from 5 seconds to 60 hours
  • Knob adjustable time ranges – progress pointer for each
  • Highly visible, calibrated dials (7.85 inch circumference)
  • Easily read and well-spaced calibrations
  • Red progress pointer displays remaining time interval
  • Pilot light indicates when timer motor is energized
  • Standard timers supplied with "power on" clutch operation
  • Optional reverse action clutch will not reset on power failure
  • 15 terminal ABS (UL rated 94V-0) molded housing has high impact resistance and will not support combustion

Description

The HP5 CYCL-FLEX® series timer is a high quality, synchronous motor driven reset timer housed in the standard CYCL-FLEX® plug-in housing.

Application of power to terminals 1, 2, and 11 energizes the clutch coil, closes contacts 9-10 and 6-8, and starts the timing period. At time out, contacts 4-3 close, 11-12 open, and the motor stops. The timer will remain in this condition until power is removed from the clutch coil.

IIII [+] Read More

Contacts 6-7-8 and 9-10-C are instantaneous contacts and operate with the application of power to the clutch coil. Contacts 3-4-5 and 11-12-A operate at time out with contacts 3-4-5 operating prior to contacts

 
  • Literature
  • Specifications

Literature and Technical Information

pdf icon

Analog Electro-mechanical Reset Timer

HP5 Series

++ HP5 Series, Percentage Timers| Brochure (58 kB)
++ HP5 Series, Manual | (105 kB)
HP5 Digital Reset Counters / Timers
 
Display: Analog Dial & Knob
Reset Time:: 1/2 second at max. setting
Power On Response: 28 ms average pull-in 17 ms average drop-out
Time Ranges:
Sym Dial Range
17 5 Sec. 5 30 Min.
15 10 Sec. 6 60 Min.
14 15 Sec. 7 150 Min.
0 30 Sec. 8 5 Hr.
01 60 Sec. 9 10 Hr.
02 150 Sec. 10 30 Hr.
03 5 Min. 11 60 Hr.
04 10 Min.    
18 15 Min.    
Voltage & Frequency:
Sym Dial Range
A6 120V, /60 Hz
B6 240V, 60Hz
Output Rating:
120VAC 10 amps, resistive, 120 VAC
240VAC 5 amps, resistive, 240 VAC
Environmental
Operating Temp.: 0° to 140°F (-18° to +60°C)
Burden: Motor: 2.45 VA, 120 VAC
Clutch: 10.5 VA
Vibration: Unaffected by 2.5G sinusoidal vibration magnitudes in both directions of three perpendicular mounting axes imposed from 10 to 900 Hz
Weight: 2 lb. 14 oz.
Approvals: UL Recognition E61735
UL Recognition 71726 (Feature 92 only)
CSA Certification LR26861
CSA Certification (Feature 92 only)
FM Approval 15030
RoHS
Dimensions: 96.82 mm x 107.95 mm, 146.05 mm deep