AcuRev 1310

 
MESH The AcuRev 1310 DIN Rail meter combines high performance with ease of integration to provide a cost-effective power and energy monitoring solution. Featuring a built-in LCD display designed to simplify setup and local reading of meter data. While the Modbus-RTU and pulse output communication allows seamless integration with data acquisition systems.
 

Features

  • Utility Revenue Grade Accuracy – IEC 62053-22 0.5s Class / ANSI C12.20 0.5 Class
  • Multiple CT Input Options compatible with any CT: 5A/1A, 333mV, Flexible Rogowski Coil, 80/100/200mA
  • 4 Channel current input including neutral current measurement
  • Residual current measurement available
  • 10-690Vac direct voltage input, fits all voltage rating system with one model
  • RS-485 port built-in with Modbus-RTU, standard integration with most systems
  • Standard Din-rail mount for ease-of-installation
  • Compatible with both 50Hz and 60Hz systems
  • Built-in energy pulse output and alarm output
  • Optional relay output for alarm and remote control
  • Tamper-proof design approved for revenue applications
 

Universal Rating

 
Voltage: Measuring from 10V to 400VL-N 690VL-L that works with most voltage ratings without a Potential Transformer. Potential transformer ratio configuration supported for high voltage systems where PT is used.
 
Frequency: Automatically adapt to 50Hz and 60Hz system without compromising the accuracy, which simplifies design and eliminates international OEM frequency issues.
space
1310 With AcuMesh
 
The AcuMesh wireless RS485 network solution completely eliminates the need for RS485 communication wiring. Each device, or group of devices can directly connect to an AcuMesh transceiver, and the job is done. The AcuMesh transceiver transparently runs with any protocol and transmits data and commands wirelessly within a network. The AcuMesh communicates from salve to master, from sensors and meters to data acquisition servers and gateways cost effectively and with minimal challenge.
space
MESH

AcuMesh-K

Standalone transceiver, includes whip antenna and power supply.
space
 
 
 
 
 
 
MESH

AXM-Mesh

AcuMesh module that plugs in Acuvim II series meter directly, include magnetic mount antenna with 3-meter extension cable.
space
 
 
 
 
 
MESH

Antenna-2db-3m-s

Magnetic mount antenna with 3 meter extension cable. Including optional adhesive base cup.
space
 
 
 
 
 
MESH

Antenna-2db-Whip

Whip Antenna that connects with AcuMesh transceiver (AcuMesh-K) or AcuMesh Module(AXM-Mesh)
 
 
 
 
 
Go to Accuenergy site
 
 
 
 
 
 
 
 

Specifications:

 
Transceiver AXM-Mesh Module
Connection: RS485 screw terminal, USB mini-B(power supply or configuration) Attached to Acuvim II Power Meter
Data Rate: 9600 bps
RF Properties
Operating Frequency Band: 902 to 928 MHz (900 MHz ISM Band)
Spread Spectrum: Frequency hopping
Number of Channels: 64
Transmit Power Output: 24 dBm (250 MW)
Receiver Sensitivity: -101 dBm
Indoor/Urban Range: Up to 1000′ (305 m)
Outdoor RF line-of-sight Range: up to 4 miles (6.5 km) with 2.1 dB dipole antennas
RF Data Range: Up to 200 kb/s
Antenna
Impedance: 50 ohm unbalance
Network and Security
Supported Network Topologies: Mesh, point-to-point, point-to-multipoint, peer-to-peer
Addressing Options: Personal Area Network Identifier (PAN ID) and 64-bit MAC add addresses
Encryption: 128 bit Encryption Standard (AES)
Power Requirements: Power supply included Directly powered by meter
Power Supply: 100-240Vac 47-63Hz N/A
Receive current 60 ma(@9V) N/A
Transmit current: 140 mA(@9V) N/A
Physical Properties
Size: 4.5 x 2.75 x 1.125 in. (11.4 x 7.0 x 2.9 cm) N/A
Weight: 150g N/A
Operating Temperature: -40 to 85°C (Industrial)
 

Applications:

 
  • Retrofit metering in existing buildings
  • Metering in campus
  • Metering in commercial buildings
  • Multi-tenant billing and submetering
  • Renewable energy array, string and inverter metering
  • Industrial facilities metering
  • Data acquisition from entire infrastructure