Showing 21–30 of 50 results

ITECH IT6000D Series – High Power Programmable DC Power Supplies

IT6000D Series has wide range of applications and a single unit provides power range of 5kW to 144kW, current up to 2040A, as well as voltage up to 2250V. IT6000D also provides multi built-in communication interfaces to simplify and accelerate the testing development. The compact 3U design saves rack space. Multi units of the same model can be paralleled easily to have higher power and the maximum power can reach up to 1.152 MW.

ITECH IT6100 Series – Programmable DC Power Supplies

IT6100 series assure you accurate measurements with 0.1mV/0.1mA high resolution and high accuracy. With high-speed List mode output and voltage rise speed up to 20ms, it can independently edit and perform the default voltage waveform to meet the high-speed test needs. IT6100 series has built-in 5 1/2 digital voltmeter and milliohm meter, which can measure additional signals. IT6100 series supports SCPI communication protocol, GPIB/USB/RS232 interfaces are optional for customers.

ITECH IT6300 Series – Triple Output DC Power Supplies

IT6300 series is high-performance programmable triple channel DC power supply, each output voltage and current can be set from 0 to maximum rated output. This series provides series connection, parallel connection and synchronous functions of channels which offer multi-purpose solutions for customers test. IT6300 series is with high resolution 1mV / 1mA and remote sense function, which make the test more accurate. With built-in standard USB / RS232 / GPIB communication interface, IT6300 series greatly enhance the communication speed, and customers also can adjust the digital step value by using the cursor to to facilitate the operation.

Buy Online

ITECH IT6700 Series – Economical DC Power Supplies

IT6700 series economical power supplies have the widest voltage and current utilizations. One power supply can replace multiple other power supplies and be widely used in various testing situations. With a capacity of 100W, voltage output of 60V, current output of 5A, they can control voltage and current change rates automatically. The power ratio can be up to 3 times. For instance, one IT6720 with up to 60 V and 5 A can substitute several previous models, allowing cost savings over the cost of multiple units.

Buy Online

ITECH IT6700H Series – High Voltage DC Power Supplies

IT6700H series high-voltage DC power supplies has a maximum output power of 3000W, adjustable voltage 0-1200V and current 0-10A. IT6700H series provide list mode, built-in RS232 / USB / GPIB communication interface, rich SCPI instructions to facilitate the setup of automated test platforms. IT6700H can accurately follow the battery charge and discharge process, widely used in battery fluctuation simulation test, battery charger, high voltage ultra high speed diode, electrolytic capacitor, electromechanical control field and ATE test system which need to use high voltage and low current DC power supply.

ITECH IT6800 Series – Programmable DC Power Supplies

IT6800 series programmable power supplies (18V-150V / 72W-216W) are small in size but have high power output, and 10mV, 10mA resolution, supports RS232 / GPIB / USB communication interface.

Buy Online

ITECH IT6900 Series – Wide-Range Programmable DC Power Supplies

IT6900A series wide range programmable power supply have built-in standard RS232, USB, GPIB, RS485 and analog interface, support SCPI protocol, facilitate remote control, industrial PLC control and the formation of intelligent test platform. Remote compensation terminals avoid the problem of inaccurate testing caused by voltage drop on the wire. Low ripple, low noise and built-in digital voltmeter make IT6900A easy to do external measurement. IT6900A can be widely applied in DC-DC power supply module, battery charging and sensors and other test areas.

Buy Online

APM SP 1U Series – Programmable DC Power Supply

APM’s SP Series 1U programmable DC power supplies have many features including: high precision and resolution, 0.05 % voltage accuracy, 0.1 % current accuracy, 0.1 mV voltage resolution, 0.2 mA current resolution, high efficiency, low ripple and noise, and multiple communication interfaces, which allows for a more flexible and easy-to-use power supply.

  • Power: 600-1600 W
  • Voltage: 20-200 V
  • Current: 7.5-60 A

APM SP 2U Series – Programmable DC Power Supply

APM’s SP Series 2U programmable DC power supplies have many features including: high precision and resolution, 0.05 % voltage accuracy, 0.1 % current accuracy, 0.1 mV voltage resolution, 0.2 mA current resolution, high efficiency, low ripple and noise, and multiple communication interfaces, which allows for a more flexible and easy-to-use power supply.

  • Power: 1000-4000 W
  • Voltage: 32-800 V
  • Current: 7.5-200 A

APM SP 3U Series – Programmable DC Power Supply

APM’s high power, programmable DC power supply series adopts high frequency isolation and active PFC design, which allows the unit to achieve high efficiency at any output point. An optional built-in electronic load feature enables the unit to function as a two-quadrant power supply. Integrated smart 3-stage charging algorithm simulation is suitable for the most common types of batteries on the market. Users can select standard automotive power network voltage curves to do the DUT performance test directly, according to the demand. List and Step modes can be used for auto sequence output.

  • Power: 6000-18000 W
  • Voltage: 80-2250 V
  • Current: 21-600 A