Showing 11–20 of 21 results

Conax TGM/MTGM Series – High Temperature Wire Compression Seal Feedthrough

TG assemblies with high-temperature fiberglass-insulated thermocouple wire are specially designed for applications where the sensor wire is exposed to process temperatures reaching up to 1400°F (760°C). This assembly is particularly targeted for use with vacuum and/or inert gas back-filled furnaces with vessel wall temperatures up to 200°F (93.3°C) and pressures not exceeding 300 psi.

Conax TGF/MTGF Series – High Temperature Wire Compression Seal Feedthrough

TG assemblies with fiberglass-insulated thermocouple wire are specially designed for applications where the sensor wire is exposed to process temperatures reaching up to 900°F (482°C). This assembly is particularly targeted for use with vacuum and/or inert gas back-filled furnaces with vessel wall temperatures up to 200°F (93.3°C) and pressures not exceeding 300 psi.

Conax TG-24/MTG-24 Series – Instrumentation Wire Compression Seal Feedthrough

This assembly consists of a Conax Technologies manufactured TG Feedthrough provided with a sealant and 24 AWG solid insulated thermocouple grade wires or copper wires. The feedthrough is furnished with 24″ of wire on each side. Longer wire lengths can be furnished as required.

Conax EGT Series – Power Compression Seal Feedthrough

  • Electrode Teflon Sealing Gland
  • Seals 1 Electrode or Element
  • For Gas or Non-Conductive Liquid
  • Stainless Steel Reusable Fitting

Conax FCA Series – Fiber Cable Assembly

  • Transmission Loss: Less than 0.3db typical (not including connectors).
  • Temperature Rating: -4°F to +185°F (-20°C to +85°C). Higher temperature models are available in some configurations. Please consult factory.

Conax FSA Series – Fiber Optic Feedthrough

  • Helium Leak Rate: 1 x 10-6 scc/sec typical
  • Transmission Loss: Less than 0.3db typical (not including connectors)
  • Pressure Rating: 1000 PSIg (70 bar) standard, up to 3000 (207 bar) PSIg optional
  • Temperature Rating: -4°F to +185°F (-20°C to +85°C). Higher temperature models are available in some configurations. Please consult factory.

Conax HEGPK Series – Power Compressions Seal Feedthrough

  • Seals one electrode, conductor or element
  • Temperature Range: Vacuum to 7,700 PSIg (531 bar)
  • Voltage 8000 VDC
  • Amperage to 200 amps
  • Supplied with or without conductor

Conax HPEG Series – Power Compression Seal Feedthrough

  • Each unit has a stepped electrode. Larger diameter of electrode is on the body side.
  • Electrode is copper (CU), stainless steel (SS) and nickel (NI)
  • Voltage rating 2000VDC
  • Body material is 316SS, ASTM 479
  • SST nuts and washers for NI and SS, brass for CU
  • All prices include a pressure test at 68°F