Showing 1–8 of 41 results

Texmate DI-50E & DI-50T Tiger Series – Programmable Meter Controllers

  • 1/8 DIN, 5 Digit Display Controllers
  • Red, green, or superbright red 7-segment, 0.56” high LEDs with full support for seven segment alphanumeric text.
  • Modular construction
  • Front panel controls
  • Up to 4 input channels

Texmate DL-40 Leopard Series – Digital Panel Meters

Notice: This product has been discontinued.
Replaced by: DL-40JANUS
  • 96x48mm
  • 4 Digit LED display
  • Three-button programming from the front panel
  • Three front panel selectable ranges.
  • Four-level brightness control of digital display, and setpoint LEDs.
  • Three programmable setpoints.
  • Relay activation can be selected to occur above (HI) or below (LO) each setpoint.
  • Hysteresis setting for all three setpoints. Delay on make and delay on break for SP1 and SP2.
  • Peak and Valley. View and Reset.

Texmate DL-40JANUS Leopard Series – Digital Panel Meters

  • 96x48mm
  • 4 Digit LED display
  • Three-button programming from the front panel
  • Three front panel selectable ranges.
  • Four-level brightness control of digital display, and setpoint LEDs.
  • Three programmable setpoints.
  • Relay activation can be selected to occur above (HI) or below (LO) each setpoint.
  • Hysteresis setting for all three setpoints. Delay on make and delay on break for SP1 and SP2.
  • Peak and Valley. View and Reset.

Texmate DX-35 Lynx Series – Modular Digital Meters

  • 96×48 mm
  • 3 1/2 Digit, Red, Green or Super Bright Red (optn).
  • 0.56″ or 0.8” high LEDs
  • Range –1999 to 1999 counts.
  • Modular input cards
  • Versatile low cost indicator

Texmate BL-40 Leopard Series – Digital Relay Meters

  • 96x24mm Low Profile
  • 4 Digit Display
  • Three-button programming from the front panel
  • Three front panel selectable ranges
  • Four-level brightness control of digital display, and setpoint LEDs
  • Three programmable setpoints
  • Relay activation can be selected to occur above (HI) or below (LO) each setpoint
  • Hysteresis setting for all three setpoints. Delay on make and delay on break for SP1 and SP2
  • Peak and Valley. View and Reset
  • Auto-sensing AC/DC Power Supply. For Voltages Between 85-265VAC/95-300VAC (PS1) or 15-48VAC/10-72VDC
  • One 9 amp form C and one 4 amp form A relay, or up to three 4 amp form A relays are available

Texmate BL-B51D40 Leopard Series – Bargraph Meters

  • 24x96mm size
  • 4 Digit LED display
  • The bargraph can display, full scale, any desired portion of the digital reading.
  • Bargraph center zero function.
  • Four programmable setpoints.
  • Setpoint 1 has delay-on-make and delay-on-break plus a special “pump on pump off” mode that creates a Hysteresis Band between SP1 and SP2.
  • Relay activation can selected to occur above or below (Lo) each setpoint.
  • Digital display blanking.
  • Decimal point setting.
  • Four-level brightness control of the bargraph digital display.

Texmate BN Series – Compact Digital Meter

  • 3 1/2 or 4 1/2 Digit display
  • Slim case
  • Pin for pin functional replacement for the Newport model 215
  • Compact 96x24mm case with non-isolated 5VDC power
  • Short depth case – just 2.83 inches (72mm) behind the panel.
  • Four user-selectable ranges of 200mV, 2V, 20V and 200V

Texmate BX-35 Lynx Series – Modular Digital Meters

  • 96×24 mm
  • 3 1/2 Digit , 0.56”Red, Green or Super Bright Red (optn).
  • Range –1999 to 1999 counts.
  • Modular input cards
  • Versatile low cost indicator