Showing all 7 results

APM EL Series – DC Electronic Load

APM’s EL Series is a high-power density, programmable DC electronic load with three voltage ranges 200V/600V/1200V. It supports CV, CC, CR, and CP, as well as CV+CC, CV+CR, and CR+CC operating modes. Two or more loads can be connected in mater/slave parallel mode to provide more power or current capacity. RS232/RS485 and USB communication interfaces are built-in, while LAN & GPIB communication cards are optional. The EL Series can be applied to battery discharge, DC charging station, and power electronics testing.

  • Power: 600-26400 W
  • Voltage: 200-1200 V
  • Current: 40-2880 A

APM SP-300 Series – Single Phase AC Power Supply

APM’s SP-300 Series AC Source is a single phase, multifunctional power supply able to output DC, AC and DC+AC, as well as measure electrical parameters precisely. The touch screen allows for complete, easy operation from the front of the unit, and USB data import/export. It is able to analog output normal or abnormal power input for electrical device testing. The SP Series features high speed DSP+CPLD control, high frequency PWM technology, active PFC design, and up to an 85% conversion efficiency.

  • Power: 600-5000 W
  • Voltage: 150-300 V
  • Current: 2.8-46 A

APM SPS-300 Series – Three Phase AC Power Supply

APM’s SPS-300 Series AC Source is a 3-phase programmable AC power supply with high power density. Featuring high speed DSP+CPLD control, high frequency PWM technology, and active PFC design, the SPS-300 series is able to provide stable DC/AC output power, as well as 3-phase/1-phase output power. The touch screen allows for complete, easy operation from the front of the unit. The SPS-300 Series is applicable in multiple testing applications including electrical, lighting, and aviation.

  • Power: 1200-20000 W
  • Voltage: 300 V
  • Current: 5.04-165.6 A

APM SP 1U Series – Programmable DC Power Supply

APM’s SP Series 1U programmable DC power supplies have many features including: high precision and resolution, 0.05 % voltage accuracy, 0.1 % current accuracy, 0.1 mV voltage resolution, 0.2 mA current resolution, high efficiency, low ripple and noise, and multiple communication interfaces, which allows for a more flexible and easy-to-use power supply.

  • Power: 600-1600 W
  • Voltage: 20-200 V
  • Current: 7.5-60 A

APM SP 2U Series – Programmable DC Power Supply

APM’s SP Series 2U programmable DC power supplies have many features including: high precision and resolution, 0.05 % voltage accuracy, 0.1 % current accuracy, 0.1 mV voltage resolution, 0.2 mA current resolution, high efficiency, low ripple and noise, and multiple communication interfaces, which allows for a more flexible and easy-to-use power supply.

  • Power: 1000-4000 W
  • Voltage: 32-800 V
  • Current: 7.5-200 A

APM SP 3U Series – Programmable DC Power Supply

APM’s high power, programmable DC power supply series adopts high frequency isolation and active PFC design, which allows the unit to achieve high efficiency at any output point. An optional built-in electronic load feature enables the unit to function as a two-quadrant power supply. Integrated smart 3-stage charging algorithm simulation is suitable for the most common types of batteries on the market. Users can select standard automotive power network voltage curves to do the DUT performance test directly, according to the demand. List and Step modes can be used for auto sequence output.

  • Power: 6000-18000 W
  • Voltage: 80-2250 V
  • Current: 21-600 A

APM SP 6U Series – Programmable DC Power Supply

APM’s high power, programmable DC power supply series adopts high frequency isolation and active PFC design, which allows the unit to achieve high efficiency at any output point. An optional built-in electronic load feature enables the unit to function as a two-quadrant power supply. Integrated smart 3-stage charging algorithm simulation is suitable for the most common types of batteries on the market. Users can select standard automotive power network voltage curves to do the DUT performance test directly, according to the demand. List and Step modes can be used for auto sequence output.

  • Power: 24000-36000 W
  • Voltage: 80-1500 V
  • Current: 42-1200 A