Digital Panel Meters
Jewell Instruments 2000 Series – Digital Panel Meters
- 4 digit readout, full scale 1999 display
- 1/2″ high digits on a high contrast LCD
- Auto-polarity (-) displayed
- Splash and hose proof meeting NEMA 4, NEMA 12, and IPC 55 standards
Jewell Instruments BL Series – Digital Panel Meters
- Ideal for line monitoring
- Value priced
- Low power consumption
- Input signal can be used to power meters
- 3 1/2 digit readout, full scale 1999 display
- 1/2″ high digits on a high contrast LCD
- Auto-polarity (-) displayed
- User selectable decimal points
- Choice of ±200mV, ±2V, 20V, ±200V, 5 , 50 AAC, Thermocouple, RTD or Frequency
- Choice of 10. 15, 20, , 32 VDC or 115VAC and 240VAC power options
Jewell Instruments DW Series – Digital Panel Meters
- Easy to read with large display and wide viewing angles
- No additional wires makes installation faster and easier
- Automatic polarity indication
- Custom nomenclature optional
Sifam Tinsley Alpha 20 – Multifunction Power Meter
- Measures important electrical parameters in 3 phase 4 Wire and 3 phase 3 Wire Networks
- True RMS measurement – measures distorted waveform up to 15th harmonic
- Limit Switch control (optional)
- 3 Line 4 Digits ultra bright LED Display (up to 9999)
- On site Programmable CT/PT Ratios
- User selectable CT Secondary 1A/5A
- User selectable PT Secondary from 100 VLL to 500 VLL
- Storage of MIN / MAX values
Sifam Tinsley Alpha 30 – Multifunction Power Meter
- Measures important electrical parameters in 3 phase 4 Wire and 3 phase 3 Wire Networks
- MODBUS (RS-485) Communication (optional)
- Pulse/Limit Switch output (optional)
- 3 Line 4 Digits ultra bright LED Display (up to 9999)
- On-site Programmable CT/PT Ratios
- User selectable CT Secondary 1A/5A
- Measurement & Display of RPM, Run hours, On hours, No. of interruption
Texmate BL-40 Leopard Series – Digital Relay Meters
- 96x24mm
- 4 Digit Display
- Range: -1999 to 9999
- Three-button programming from the front panel
- Three front panel selectable ranges
- Four-level brightness control of digital display, and setpoint LEDs
- Three programmable setpoints
- Relay activation can be selected to occur above (HI) or below (LO) each setpoint
- Hysteresis setting for all three setpoints. Delay on make and delay on break for SP1 and SP2
- Peak and Valley. View and Reset
- Auto-sensing AC/DC Power Supply. For Voltages Between 85-265VAC/95-300VAC (PS1) or 15-48VAC/10-72VDC
- One 9 amp form C and one 4 amp form A relay, or up to three 4 amp form A relays are available
Texmate BL-B51D40 Leopard Series – Bargraph Meters
- 96x24mm
- Range: -1999 to 9999
- 4 Digit LED display
- 51 segment bargraph
- Bargraph center zero function.
- Four programmable setpoints.
- Setpoint 1 has delay-on-make and delay-on-break plus a special “pump on pump off” mode that creates a Hysteresis Band between SP1 and SP2.
- Relay activation can selected to occur above or below (Lo) each setpoint.
- Digital display blanking.
- Decimal point setting.
- Four-level brightness control of the bargraph digital display.
Texmate BN Series – Compact Digital Meter
- 96x24mm
- 3 1/2 or 4 1/2 Digit display
- Slim case
- Pin for pin functional replacement for the Newport model 215
- Short depth case – just 2.83 inches (72mm) behind the panel.
- Four user-selectable ranges of 200mV, 2V, 20V and 200V
Texmate BX-35 Lynx Series – Modular Digital Meters
- 96×24 mm
- 3 1/2 Digit , 0.56”Red, Green or Super Bright Red (optn).
- Range: -1999 to 1999 counts.
- Modular input cards
- Versatile low cost indicator
Texmate BX-45 Lynx Series – Modular Digital Meters
- 96×24 mm
- 4 1/2 Digit , 0.56”Red, Green or Super Bright Red (optn).
- Range: -19999 to 19999 counts.
- Modular input cards
- 16 bit dual slope
- Versatile low cost indicator
