Yokogawa MT210/MT210F Precision Digital Manometers

space
MT210
Characteristics:
  • High accuracy: ±0.01%, with a maximum allowable input of 500 kPa (130 kPa-range model)
  • A wide range of pressures, from a low differential pressure of 1 kPa to a high gauge pressure of 3000 kPa
  • Select from three measurement modes: normal speed, medium speed, and high speed (MT210F series)
  • D/A conversion output, comparator output, and external trigger input (optional)
  • GP-IB and RS-232 interfaces l12-V DC power supply lBattery operation (optional)
Product Description:
space
The MT210/210F series of digital manometers, combine YOKOGAWA’s best pressure measurement technologies, offers excellent accuracy, reliable operation, and a variety of applications. These measuring tools provide the perfect field and lab solutions for a wide range of technologies.
Features :
High performance and reliable operation
  • High performance, high resolution The MT210/210F series features high performance, and a high, basic accuracy of ±0.01% thanks to the YOKOGAWA-original silicon resonant sensor.
  • High allowable input pressure The maximum allowable input pressure is as high as 500 kPa (such as in the 130 kPa-range model). Now you don’t have to worry about sensor breakdown due to overrange pressure input.
  • Traceable to Japanese and US national standards In addition to Japanese national standards (National Research Laboratory of Metrology under the Agency of Industrial Science and Technology), we are prepared to provide services for traceability to the US national standard NIST.
  • Minimal effect of temperature changes The silicon resonant sensor is highly immune to environmental discrepancies such as temperature changes.
  • A variety of measurement objectives
    • Supports high-speed measurement The MT210F series has been added to our range or pressure measuring instruments in order to support high-speed measurements. These measurements, such as the observation of transient-response characteristics, include relatively fast pressure changes.
    • A wide range of models You can choose a model to fit your application from models with different pressure types/gauges and absolute and differential pressures. Also choose among models with pressure ranges from the low differential pressure of 1 kPa to the gauge pressure of 3000 kPa.
    • Applicable to both gases and liquids Never be bothered by the labor of switching between models. The MT210/210F series can measure both gases and liquids. With the new differential-pressure models you can measure liquids that you couldn’t measure before with the MT110-series differential-pressure models
  • Ease of systemization
  • D/A conversion output The D/A-converted signal of a measured value is output through an external terminal. This feature permits you to easily send data to your measurement system or recorder
Observation examples of D/A conversation output
  • Differences due to the measurement mode, where the normal-speed waveform is when the Moving-average option is turned off
  • Close-up of output waveform (with the dynamic mode enabled)
  • Comparator output and external trigger input Use these I/O functions to set the upper and lower limits, judge the measured value, and output the result through an external terminal. What’s more, you can apply a start-of-measurement trigger using a falling edge of an external trigger signal. These features will help automate your production/inspection lines of pressure-related products.
  • GP-IB and RS-232 interfaces This feature lets you read measured values into your PC or set measurement conditions from the PC. Communication is still possible even when the MT210/210F series are operated on batteries or the DC power source.
  • Support of field use
  • 12-V DC power supply The MT210/210F operate on a 12-V DC power supply. This feature is useful for in-vehicle tests. Operation on Ni-Cd battery pack
  • Operation on Ni-Cd battery pack The MT210/210F series, which come standard with a built-in battery charger, can continuously operate on an optional Ni-Cd battery pack for approximately 10 hours.
  • Assured compatibility with earlier models
  • Inheritance of performance from MT110 Series The MT210/210F series feature additional functions such as support of high-speed measurement, while inheriting the basic performance from their predecessor, the MT110.
  • Common communication commands The MT210/210F series share the GP-IB and RS-232 communication protocols with their predecessor, the MT110. No modifications to the communication protocols are necessary when expanding a system that uses the earlier series or when replacing the series.
pdf_pic Downloads:General Specifications
Applications:
spaceUsing the MT210 as a pressure standardCalibrating & inspecting pressure sensors, pressure gauges, or blood pressure meters in a production lineCalibrating & inspecting aircraft instrumentation (altimeters / speedometers)Measuring pressure loss in radiatorsMeasuring differential pressures for clean rooms or benchesMonitoring pressure in a performance test of electronic components under low atmospheric pressureMeasuring the volume of airflow of air-conditionersMeasuring the wind speed of hair dryersMeasuring the amount of airflow of air cleaners
space
Other applications include:
space
Calibrating and inspecting flowmeters; measuring working pressure of pneumatic actuators; measuring pressure in a production/inspection line of valves; controlling the atmospheric pressure of standards rooms; monitoring the pressure of dead-weight pressure gauges; measuring the suction and exhaust pressures of an engine; measuring the static pressure of an engine cooling fan; measuring pressure in wind-tunnel experiments; measuring the pressure of refrigerator coolants; measuring the amount of airflow of ventilating fans; measuring the amount of airflow and static pressure of cooling fans and more.
weblink
base
mail web