Texmate Model PL-B101D40

3/32 DIN, 101-Segment Bargraph Relay Meters

Texmate PL-B101D40 Bargraph Relay Meters
Characteristics :
  • The bargraph can display, full scale, any desired portion of the digital reading.
  • Bargraph center zero function.
  • Four programmable setpoints.
  • Setpoint 1 has delay-onmake and delay-on-break plus a special “pump on pump off” mode that creates a Hysteresis Band between Software Features SP1 and SP2.
  • Relay activation can be selected to occur above (hi) or below (Lo) each setpoint.
  • Digital display blanking.
  • Decimal point setting.
  • Four-level brightness control of the bargraph and digital display.
Product Description:
Red, 101 segment bargraph, with a 4-digit LED digital display for monitoring, measurement, and control applications, mounted in a 24×144 case.
General Features:
  • External transmitters or signal conditioners can be eliminated by direct connection of the sensor output to more than 38 Plug-in Input Signal Conditioners that include:
AC/DC Current Pressure Resistance
AC/DC Voltage Process Temperature
Load Cell Prototype 4 to 20 mA
  • 24 V DC excitation is available to power external transmitters and 5 or 10 V DC excitation is available for resistance bridge type sensors such as Load Cells and Pressure Transducers.
  • A red, 101 segment high brightness bargraph.
  • Red 4-digit LED display with a range of 1999 to 9999 (12000 counts).
  • Front panel LED annunciators provide indication of setpoint status.
  • Two 10 Amp Form C, and two 5 Amp Form A relays available.
  • Auto-sensing AC/DC power supply. For voltages between 85-265 V AC/95-370 V DC (PS1).
  • Provision to connect an external programming lockout switch.
  • Provision for external DIM switch to reduce the brightest display setting by 50%.
  • Automatic intelligent averaging smooths noisy signals, while providing a fast display response to real level changes.
  • More than 38 different Plug-in I-Series Modular Input Signal Conditioners are approved for Texmate’s Leopard Family of meters.
Specifications :
Display: 4 digit 0.27″ Red LED display (std).
Display Color: Red
Digital Display Range: -1999 to 9999 counts.
Bargraph: 101 segment, red vertical (std),
Annunciators: 4 red LEDs on front panel; one per setpoint.
Positive Overrange: Bargraph and top segments of digital display flash.
Negative Overrange: First segment of bargraph and bottom segments of digital display flash.
A/D Converter: 14 bit single slope
Accuracy: ±(0.05% of reading + 2 counts)
Temp. Coeff.: 100 ppm/°C (Typical)
Warm up time:: 2 minutes.
Conversion Rate: 3 to 16 conversions per second
Relay Output: Two 5A form A and two 10A Form C relays
Analog Output : Isolated 16 bit user scalable mA or V
OIC (mA out) 4-20 mA @ 0 to 500Ω max loop resistance
OIV (volts out) 0-10 V DC @ 500 Ω or higher resistance
Power Supply: AC/DC Auto sensing wide range supply
PS1 (std): 85-265 VAC / 95-370 VDC @ 2.5W max 4.2W
PS2 18-48 VAC / 10-72 VDC @ 2.5W max 4.2W
Operating Temp.: 0 to 60 °C
Storage Temp: –20 °C to 70 °C.
Relative Humidity: 95% (non condensing)
Case Dimensions: 3/32 DIN, Bezel: 24x144mm (0.95”x5.69”),Depth behind bezel 128.6 mm (5.08″), Plus 14 mm (0.55”) for connector.
Weight: 9.5 oz., 12 oz when packed