Shop
Eagle Signal A103 – Time Totalizer
The A103 Elapsed Time Indicators provide a range of capabilities unequaled in products of similar size and cost. A single model can be programmed to display in seconds, minutes, hours, or hours: minutes: seconds. The A103 series also includes matching indicators for count totalization and rate metering, as well as models with a preset output for control by count or time.
Eagle Signal BRE – Reset Timer
The BRE Series enclosed construction with front facing dial and knob. The BRE Series timer has a heavy duty terminal block, with 9 screw terminals that will readily accept 16 gauge wire commonly used in industrial circuit wiring.
Eagle Signal CT4 Series – CYCL-TIME Percentage Timer
The NEW CYCL-TIME™ Percent Timer Series is an accurate, economical, enclosed percentage timer designed for use in applications where a repetitive “on” time
of a fixed cycle needs to be variable. This timer series is ideally suited for irrigation controls, chemical feeding, programmed temperature, electric heaters, ovens, motor controls and lubrication systems.
Eagle Signal DG100 Series – Solid State Timer
The DG100 is a solid state timer housed in a 1/8 DIN, molded NORYL® case. The timer uses CMOS integrated circuits for the timing function. The DG100 series timer is available in 16 time ranges from 3.5 seconds to 30 hours. The DG200 series timer is a microprocessor based, four digit reset timer housed in a 1/8 DIN style enclosure. There are four time ranges from 99.99 seconds to 99 hours and 99 minutes.
Rigol DS70000 StationMax Series – Digital Oscilloscopes with Real‐Time Spectrum Analysis
Rigol’s DS70000 series combines 5 instruments into 1: including a digital oscilloscope, spectrum analyzer, digital voltmeter, high precision frequency counter and totalizer, and protocol analyzer.
- 15.6 ” capacitive multi-touch flip screen/gesture enabled operation
- Bandwidth: 3 GHz – 5 GHz
- Maximum Sample Rate: 20 GSa/s
- Maximum Memory Depth: 2 Gpts
- Maximum Waveform Capture Rate: ≥1,000,000 wfms/s
- Vertical Resolution: 8-16 bits
- 4 analog channels, 1 EXT channel input
Veeder-Root 7443 – General Purpose Totalizer
The perfect totalizer for a wide range of industrial applications. Precision internal working parts are supported and protected by its die-cast frame and heavy duty enclosure. Available with popular AC and DC voltage ranges, mounting styles, and reset features.
Veeder-Root 7790 & 7791 – Miniature Electro-Mechanical Totalizer
The 7790 Series is a non-reset totalizer that delivers excellent performance and reliability characteristics for a minimal price. The 7791 Series includes a push-bar reset feature. These totalizers have a compact size and five or six digit indication.
Veeder-Root 7999-MITE – Electronic Totalizer
The 7999 MITE Series is a versatile family of LCD totalizers that includes unidirectional and bidirectional models. Based on the latest CMOS circuitry, they feature a long-life internal power source, high count-speed capability, and eight digit liquid crystal display. The bidirectional MITE totalizer provides count/direction operation – one input receives count pulses, while a second input controls counting direction.
Veeder-Root DZ100 MINIFLEX – Electronic Predetermining Counter
The DZ100 is a solid state counter which uses CMOS integrated circuits for the counting function. Counter output action occurs when the count total, indicated by front mounted thumbwheel switches, is reached. Solid state counter housed in a 1/8 DIN molded NORYL® case.
Monarch illumiNova Fixed Mount LED Stroboscope
The illumiNova fixed mount LED stroboscopic inspection systems are designed for continuous use in high speed applications requiring crisp, clear, stop motion quality inspection. The extraordinarily bright LED’s provide an ultra uniform white spectrum light. Available in a six inch model or one foot lengths up to 8 feet, with 3 different lens options to ensure you will have light coverage for any job. The powerful on board intuitive digital controller allows the user to quickly set flash rates, flash duration, brightness levels and many other advanced features. Flash rates can also be triggered remotely using machine mounted sensors connected directly to illumiNova’s digital input or use the optional remote controller to extend the operating distance up to 100 feet.
Rigol DS1000Z Series – Mixed Signal Oscilloscopes
- 50MHz to 200MHz Bandwidth, 2-4 channels
- 1GSa/s Real-time Sample Rate
- 24Mpts Memory Depth
Monarch P5-11 Proximity Sensor
1-60,000 RPM. The P5-11 Proximity Sensor is a rugged industrial 2 wire probe style inductive sensor. It can be used 0.2 inches (5mm) from a 0.5 inch (12mm) metallic target such as a bolt head or shaft locking key.
Monarch PS-12 Proximity Sensor
1-24,000 RPM. The PS-12 Proximity Sensor is a rugged industrial 3-wire probe-style inductive sensor. It can be used up to 0.15 inch (4 mm) from a 0.5 inch (12 mm) metallic target such as a bolt head or shaft locking key. Includes a red LED on-target indicator.
Monarch RLS Rugged Laser Sensor
We’ve taken our hugely popular Remote Optical Laser Sensor (ROLS) and packaged it in a Rugged 316L SS IP67 rated enclosure. Although optical speed sensors require atmospheres that are clean and free of mist, steam, dirt, oil and other contaminants in order to function properly there are times when contamination can occur accidentally. The RLS utilizes a water tight M12 connector that facilitates easy removal for cleaning. With an operating range of up to 25 feet, the RLS can be used in applications where close proximity isn’t convenient or safe. The laser light source makes setup incredibly easy.
NEO Messtechnik PQA 8000 – Mobile Power Quality Analyzer
The NEO PQA8000 reflects our understanding of power grid applications of today – the most complete and reliable mobile Analyzer you will find on the market. Multi-Touch, 4 hours mobile operation and complying with Power Quality Standards and Grid Codes your measurement application requires. Class A Power Quality Analyzer for measurements and analyses way beyond EN50160.
The only instruments in the world measuring Supraharmonic currents and voltages up to 500 kHz.
NEO Messtechnik PQA 7000 – Mobile Power Quality Analyzer
The NEO PQA7000 is the complete package mobile power quality analyzer. Featuring Multi-Touch, 6 hours mobile operation and complying with Power Quality Standards and Grid Codes your measurement application requires. Class A Power Quality Analyzer for measurements and analyses way beyond EN50160.
NEO Messtechnik PQM 100 – Power Quality Monitor
PQM-100 is based on a modular architecture, allowing combinations of one CPU module and up to 6 selected input modules into one device. The input modules are providing input signal isolation, filtering and A/D conversion. The CPU module is equipped with FPGA real-time controller for the calculation of all parameters and to provide all interfaces and data storage.
NEO Messtechnik PQM 200 – Power Quality Monitor
The PQM-200 is a computer-based Power Quality Monitor with up to 48 input channels. It combines functionalities of a Power Quality Monitor, Disturbance Recorder, Power Fault Recorder, Transient Recorder, Phasor Measurement Unit (PMU) and high precision energy meter. The input modules are fully-isolated (isolation voltage 6kV) and provide a synchronized sampling rate of 144 kS/s per channel and 24-bit resolution. An Automatic Anti-Aliasing filter together with extremely low-noise ensures signal quality and signal processing.
NEO Messtechnik PQM SCADA – Power Quality Management Software
PQM-SCADA is the enterprise management software for Power Quality Analyzers and Disturbance Recorders. It is an easy-to-use software solution that allows the user to visualize live-data, historical data or reports. The multi-screen capability gives the user the ability to design their own visualization screens including the use of multiple monitors.
User-management with different access and security levels is integrated, including the option for your customers to view limited data.
Yokogawa AB-40 106 Series – Synchroscope
- 4.5″ size
- Water resistant construction
- Slow-Fast scale
Yokogawa TX10 Digital Thermometers
TX10 Series offers thermocouple thermometers that support K, J, E and T type thermocouples.
There are three models available:
- 1-channel single-function
- 1-channel multi-function
- 2-channel multi-function models.
Hoyt HST-90 Series – Rectangular Analog Panel Meters
3.5″ Rectangular AC or DC Analog Panel Meters
- White dial
- 90 degree arc
- Black lettering
- Black Airplane Pointer
- Surface mount
- 1/4-28 Input Terminals
- Plastic case
- Pivot & jewel
- Equivalent to Yokogawa Big Look Series
Hoyt HST-70 Series – Rectangular Analog Panel Meters
2.5″ Rectangular AC or DC Analog Panel Meters
- White dial
- 90 degree arc
- Black lettering
- Black airplane pointer
- Surface mount
- 3-stud 4-40
- 1/14-28 input terminals
- Plastic case
- Pivot & jewel
- Equivalent to Yokogawa Big Look Series
Hoyt HST-98 Series – Rectangular Analog Panel Meters
3.5″ Rectangular AC or DC Analog Panel Meters
- White dial
- 90 degree arc
- Black lettering
- Black Knife Edge Pointer
- Surface mount
- #10 Input Terminals
- Plastic case
- Pivot & jewel
- Equivalent to Yokogawa Horizon Series
Hoyt HST-78 Series – Rectangular Analog Panel Meters
2.5″ Rectangular AC or DC Analog Panel Meters
- White dial
- 90 degree arc
- Black lettering
- Black Knife Edge Pointer
- Surface mount
- 4-Stud 4-40
- #10 Input Terminals
- Plastic case
- Pivot & jewel
- Equivalent to Yokogawa Horizon Series
Hoyt HLS-80 Series – Switchboard Analog Panel Meters
3.25″ AC Switchboard Analog Panel Meters
- White Dial
- 250 Degree Arc
- Black Lettering
- Black Airplane Pointer
- Surface Mount
- 4-Stud 4-40
- Input Terminal Strip
- Plastic Case
- Pivot & Jewel
Hoyt HLS-110 Series – Switchboard Analog Panel Meters
4.5″ Switchboard Analog Panel Meters
- White Dial
- 250 Degree Arc
- Black Lettering
- Black Airplane Pointer
- Surface Mount
- 4-Stud 4-40
- Input Terminal Strip
- Plastic Case
- Pivot & Jewel
Hoyt HLS-110 SYNC Series – Digital Synchroscope
- Standard 4.5-inch switchboard case
- Input voltage: 110V AC, 120V AC or 240V AC
- Front panel mount
- 3 bi-colored LED indicators for “SYNC”, “GEN” and “BUS”
- 24 LEDs in a circle display the phase angle and the frequency differences between 2 networks
- 360° indication
- 12 o’clock position LED is bi-colored
Hoyt HLS-110A SYNC Series – Analog Synchroscope
- Standard 4.5-inch switchboard case
- Input voltage: 120V AC or 240V AC
- Frequency Range: 50Hz or 60Hz
- Scale: SLOW / FAST
- Indication: Moring pointer
- 360° indication
- Metal Case
Hoyt HLS-96 SYNC Series – Digital Synchroscope
- Square shape panel 96 x 96mm
- Input voltage: 110V AC, 120V AC or 240V AC
- 3 bi-colored LED indicators for “SYNC”, “GEN” and “BUS”
- 24 LEDs in a circle display the phase angle and the frequency differences between 2 networks
- 360° indication
- 12 o’clock position LED is bi-colored
- PC window, ABS resin frame, PC case
Hoyt HLS-96A SYNC Series – Analog Synchroscope
- Square shape panel 96 x 96mm
- Input voltage: 120V AC or 240V AC
- Frequency Range: 60Hz or 70Hz
- Scale: SLOW / FAST
- Indication: Moring pointer
- 360° indication
- PC window, ABS resin frame, PC case
Bauser Round Faced Elapsed Time Meters
7-digit Bauser counters with small dimensions for AC and DC operations. They are even suited for heavy applications on utility vehicles. Even for this application a protection class of IP65 (front) is offered.
Bauser Square Faced Elapsed Time Meters
Bauser counters have small dimensions and can be used in AC and DC operations. They are even suited for heavy applications on utility vehicles. Even for this application a protection class of IP65 (front) is offered.
Accuenergy Acuvim II – High Performance Power Meters
The Accuenergy Acuvim II is an advanced power and energy meter designed for industrial and commercial applications. With its accurate measurement technology and comprehensive monitoring capabilities, it provides real-time data on voltage, current, power, energy, and harmonics. The user-friendly interface and multiple communication protocols make it easy to integrate into existing systems, while the built-in data logging and power quality analysis features enhance energy management and system optimization. The Acuvim II is a reliable and durable solution that helps businesses monitor and control their electrical parameters efficiently, ultimately improving energy efficiency and reducing costs.
Accuenergy Acuvim IIBN – BACnet Power Meter
- Revenue Grade 0.2 class accuracy
- Built-in BACnet-IP Protocol for integration with BAS and other monitoring and control systems
- BTL Listed for Smart Sensor (B-SS) and BACnet Smart Actuator (B-SA)
- Built-in mobile-friendly web server for real-time meter reading and configuration
- Secure access to meter via HTTPs encrypted webpage
Accuenergy AcuDC 240 Series – DC Power Meters
- Backlight on-board LCD display
- Optional MODBUS RTU communications
- Optional digital and analog I/O
- Optional relay output
- Optional data logging
- Get optional alarm notification
- Standard DIN size for easy installation
Accuenergy Acuvim-L – Economical Power Meters
- Six different models for different applications
- NEMA 4 rated tough and watertight design
- 3-Line LCD display with backlight
- Multiple current transformer options
- Class leading 5-year warranty
- Built-in MODBUS RTU (some models)
- Optional digital/analog I/O or PROFIBUS (some models)
- Optional DIN rail mount transducer (some models)
Accuenergy Acurev 1310 Series – Utility Revenue Grade Accuracy
- Utility Revenue Grade Accuracy – IEC 62053-22 0.5s Class / ANSI C12.20 0.5 Class
- Multiple CT Input Options compatible with any CT: 5A/1A, 333mV, Flexible Rogowski Coil, 80/100/200mA
- 4 Channel current input including neutral current measurement
- Residual current measurement available
- 10-690Vac direct voltage input, fits all voltage rating system with one model
- RS-485 port built-in with Modbus-RTU and BACnet MS/TP, standard integration with most systems
- Standard Din-rail mount for ease-of-installation
- Compatible with both 50Hz and 60Hz systems
- Built-in energy pulse output and alarm output
- Optional relay output for alarm and remote control
- Tamper-proof design approved for revenue applications
Accuenergy AcuRev 2000 Series – Revenue Approved Power Meters
- 18 channels for 18 single phase or 6 three phase circuits
- Revenue grade standard ANSI C12.20 class 0.5 and IEC 62053-22 class 0.5s
- External current transformers for retrofit applications
- Optional Direct Current input for new installation
- Built-in MODBUS RTU via RS485 for integration
- Built-in data logging for historical recording
- Over/under limit alarms for demand control
- Support protocols Modbus-TCP/IP, SMTP, HTTP/HTTPS Post, FTP & SNTP
- Support 15-second interval datalogging and data post
- Supports FTP server built-in for datalogging storage and retrieval
- Support SNMP V2 and SNMP trap
- Built-in Ethernet and WiFi communication
- Secure and encrypted HTTPs Webserver for meter reading and configuration
- Two-tier user management system to provide efficient monitoring and access
- Optional free cloud-based metering data storage
Accuenergy AcuCT 5A – Split Core Current Transformers
- 0.5% accuracy from 10%-120% of rated current
- 100A to 5000A measurement range
- Industrial standard 5A secondary output
- Optional 1A output
- Accessory kits included for mounting in multiple locations
- UL recognized
Accuenergy AcuRev 2100 Series – Revenue Approved Multi-Circuit Submeter
- Revenue Grade: ANSI C12.20 0.5 class & IEC 62053-22 class 0.5s
- Measure 18 single-phase or 6 polyphase circuits simultaneously
- 8MB memory standard. WEB2 option adds 8GB of non-volatile memory for storing energy & power quality data
- Combines easy remote meter access with industry-leading security features
- Modbus-RTU ready. WEB2 option adds support for multiple industrial protocols & interfaces such as Modbus, BACnet, WiFi, and dual Ethernet
- SnapOn CT technology reduces polarity errors as well as installation & maintenance times
- 5 year warranty
Accuenergy AcuCT Flex – Flexible Rogowski Coil Current Transformers
- High accuracy for demanding applications
- Wide frequency range means excellent choice for harmonics and power quality
- Wide current input range from 5A – 50,000A AC
- Choice of 16″, 24″, 36″ or 47″ length
- No additional power supply needed when used with Acuvim II Series meters
- Fully customizable selection of flexible CT
Accuenergy AcuCT Hinged – Split Core Current Transformers
- Quick & simple installation with hinged clip
- Safe mV secondary output
- 5A – 600A AC current input range
- 0.5% accuracy from 10-120% of rated current
- UL recognized
Accuenergy AcuCT mV – Split Core Current Transformers
- Conventional 333 mV split-core CT
- Safe mV secondary output
- 0.5% accuracy from 10-120% of rated current
- 20A – 5000A AC current input range
- UL recognized
Accuenergy AcuCT R – Split Core Current Transformer
- 5A – 5000A AC current input range
- Revenue grade accuracy IEC 60044-1 0.5s class
- UL listed for XOBA UL2808 standard, CSA C22.2 No. 61010-1
- Push-open mechanism makes the installation quick and simple
- Multiple voltage or current secondary output options including 5A and 333mVMultiple mounting options with included accessories
- Multiple window shapes and sizes for multiple applications
Accuenergy AcuCT S113 – Solid Core Current Transformers
- 1% Class Accuracy
- 1.2In RF
- 50Hz-60Hz Rated Frequency
- ≤±1.0% Ratio Error
- ≤60 Phase Error
- 5-120% Measurement Range
- 500V / 100 MΩ min insulation resistance
Accuenergy AcuCT S77 – Solid Core Current Transformers
- 0.15 class accuracy
- 10 kV impulse insulation (BIL)
- 50 MΩ insulation resistance
- 18 AWG UL 1015 Lead Wire
- Measurement Canada Approved
Accuenergy AcuPanel 9100 Series – Pre-Wired Meters in Enclosure
- Factory pre-wired for fast, reliable installation
- Factory pre-configuration eliminates meter programming on-site
- Required accessory components all pre-installed
- Self-powered panel meter enclosure does not require separate power supply
- Durable enclosures provide high tolerance for external force
