Showing 25–48 of 941 results

Siglent SDS5000X – Digital Oscilloscope

  • Bandwidth up to 1 GHz
  • Real-time sampling rates of up to 5 GSa/s
  • Record length up to 250 Mpts
  • Capture waveforms at an impressive rate of up to 500,000 wfm/s
  • 10.1″ touch display
  • 2/4 analog channels and 16 digital channels

Siglent SDS6000A – High-Speed Digital Oscilloscope

  • Bandwidth up to 2 GHz, featuring a 8-bit ADC resolution
  • Real-time sampling rates of up to 5 GSa/s
  • Record length up to 500 Mpts
  • Capture waveforms at an impressive rate of up to 750,000 wfm/s
  • 12.1″ touch display
  • 4 analog channels and 16 digital channels

Siglent SDS6000L – Low Profile Digital Oscilloscope

  • Bandwidth up to 2 GHz
  • Real-time sampling rates of up to 5 GSa/s
  • Record length up to 500 Mpts
  • Capture waveforms at an impressive rate of up to 750,000 wfm/s
  • 8/4 analog channels and 16 digital channels

Siglent SDS7000A – High-Speed Digital Oscilloscope

  • Bandwidth up to 4 GHz, featuring a 12-bit ADC resolution
  • Real-time sampling rates of up to 20 GSa/s
  • Record length up to 1 Gpts
  • Capture waveforms at an impressive rate of up to 1,000,000 wfm/s
  • 15.6″ touch display
  • 4 analog channels and 16 digital channels

Siglent SDS800X HD – Digital Oscilloscope

  • Bandwidth up to 200 MHz
  • 12-bit high resolution
  • Real-time sampling rates of up to 2 GSa/s
  • Record length up to 100 Mpts
  • Capture waveforms at an impressive rate of up to 500,000 wfm/s
  • 7″ touch display
  • 2/4 analog channels and 16 digital channels

Siglent SHA850A Handheld Spectrum & Vector Analyzer

  • Standard Spectrum Analyzer (SA) and Cable and Antenna Tester (CAT) modes, with optional Vector Network Analyzer (VNA) mode
  • Frequency Range: 9 kHz to 7.5 GHz
  • Displayed Average Noise Level (Typ.): -165 dBm/Hz
  • Single-Sideband (SSB) Phase Noise (Typ.): -104 dBc/Hz @1 GHz, 10 kHz offset
  • Typical Dynamic Range in VNA mode: 114 dB
  • Measurement Options: Channel power, Adjacent Channel Power Ratio (ACPR), Harmonics, and Third Order Intercept (TOI)
  • Features: Standard preamplifier, 8.4” touch screen, up to 4 hours of working time
  • Additional Capability: GPS location and logging

Siglent SHS1000X – Handheld Oscilloscope

  • Isolation voltage: CATIII 600 Vrms, CATII 1000 Vrms
  • Combines oscilloscope, serial trigger and decoder, spectrum analysis, data logger, and multimeter functions into a convenient and portable design
  • Available in 100 MHz or 200 MHz bandwidth models
  • Sample rate: 1 GSa/s (single-channel) or 500 MSa/s (two-channels)
  • Record length: Up to 12 Mpts
  • Includes hardware-based true RMS multimeter
  • IP51 dust/water resistance certified

Siglent SHS800X – Handheld Oscilloscope

  • Combines oscilloscope, serial trigger and decoder, spectrum analysis, data logger, and multimeter functions in a portable design
  • Available in 100 MHz or 200 MHz bandwidth models
  • Sampling rate: 1 GSa/s (single-channel) or 500 MSa/s (two-channels)
  • Record length: Up to 12 Mpts
  • Allows waveform recording for up to 22 hours
  • IP51 dust/water resistance certified

Siglent SNA5000A Vector Network Analyzer

  • Frequency Range: 9 kHz – 8.5 GHz and 100 kHz – 26.5 GHz
  • Frequency Resolution: 1 Hz
  • Output Level Setting Range: -55 dBm to +10 dBm
  • Dynamic Range: 125 dB
  • Supported Ports: 2/4 ports for S-parameters, Balance Measurements, and Time Domain Analysis
  • Measurement Capabilities: Q-factor, bandwidth, and Insertion Loss
  • Power Source Calibration Compatibility: Compatible with R&S NRPxxA/AN and Keysight U2000A/B series USB power meters
  • ECal Kits Compatibility: Compatible with ECal kits from several manufacturers

Siglent SPD1000X Programmable DC Power Supply

  • Single channel high-precision programmable voltage output:

    • SPD1168X: 16 V / 8 A, total power up to 128 W
    • SPD1305X: 30 V / 5 A, total power up to 150 W
  • Stable, reliable, Low ripple and noise: ≤ 350 uVrms/3 mVpp; < 2 mArms
  • Fast transient response time: < 50 μs
  • 5-digit Voltage, 4-digit Current Display, Minimum Resolution: 1 mV / 1 mA
  • 2.8-inch true color TFT-LCD 240×320 display
  • 2 types of output modes: Two-wire output mode, 4-wire compensation output mode, Max. compensation 1 V

Siglent SPD3303C Programmable DC Power Supply

  • 3 independent high precision outputs: Two 32 V / 3.2 A, One 2.5 V / 3.3 V / & 5 V / 3.2 A, totaling 220 W power
  • 4-digit voltage and 3-digit current display, with minimum resolution of 10 mV and 10 mA
  • Three output modes available: independent, series, and parallel
  • Compatible design for 100/120/220/230 V power grids, catering to various power requirements

Siglent SPD3303X / SPD3303X-E Programmable DC Power Supply

  • 3 independently controlled and isolated outputs: Two 32 V/3.2 A, one 2.5 V / 3.3 V / 5 V / 3.2 A × 1, totaling 220 W
  • Voltage displayed with 5 digits, current with 4 digits, Minimum Resolution: 1 mV/1 mA (SPD3303X)
  • Timing function for programmed output steps
  • 4.3-inch true color TFT-LCD display with resolution of 480 x 272
  • 3 types of output modes: independent, series (max 60 V), and parallel (max 6.4 A)

Siglent SPS5000X Wide Range Programmable Switching DC Power Supply

  • Rated Output Voltage: 40V, 50V, 80V, 160V
  • Rated Output Power: 180W, 360W, 720W, 1080W
  • Wide range of output voltage and current, providing high efficiency power supply
  • Selection between CV and CC priority modes for better protection of equipment under test
  • Load transient recovery time (Load change from 50~100%): <1ms
  • Adjustable slew rate of output voltage and current
  • Setting and readback resolution: 1 mV, 1 mA

Siglent SSA3000X – Spectrum Analyzer

  • All-Digital IF Technology
  • Frequency Range from 9 kHz to 2.1/3.2 GHz
  • -161 dBm/Hz Displayed Average Noise Level (Typ.)
  • -98 dBc/Hz @10 kHz Offset Phase Noise (1 GHz, Typ.)
  • Total Amplitude Accuracy < 0.7 dB
  • 1 Hz Minimum Resolution Bandwidth (RBW)
  • Tracking generator (TG) is currently included at no charge

Siglent SSA3000X Plus – Spectrum Analyzer

  • Frequency Range: 9 kHz to 1.5 GHz / 2.1 GHz / 3.2 GHz / 7.5 GHz
  • Displayed Average Noise Level (Typ.): -165 dBm/Hz
  • Offset Phase Noise (Typ.): -98 dBc/Hz @10 kHz Offset (1 GHz)
  • Total Amplitude Accuracy: < 0.7 dB
  • Screen: 10.1-inch Multi-Touch
  • Input Support: Mouse and Keyboard
  • Remote Control: Web Browser Remote Control on PC and Mobile Terminals
  • File Operation: Supported

Siglent SSA3000X-R – Real-Time Spectrum Analyzer

  • Spectrum Analyzer Frequency Range from 9 kHz up to 3.2 GHz / 5.0 GHz / 7.5 GHz
  • Now with VNA and DTF functions, free!
  • -165 dBm/Hz Displayed Average Noise Level (Typ.)
  • -98 dBc/Hz.@10 kHz Offset Phase Noise (1 GHz, Typ.)
  • Level Measurement Uncertainty < 0.7 dB (Typ.)
  • Up to 40 MHz Real Time Analysis Bandwidth
  • Web Browser Remote Control on PC and Mobile Terminals and File Operation

Siglent SSA5000A – Spectrum Analyzer

  • Frequency Range from 9 kHz up to 13.6 /26.5 GHz
  • -165 dBm/Hz Displayed Average Noise Level (Typ.)
  • -105 dBc/Hz@1 GHz,10 kHz offset SSB Phase Noise (Typ.)
  • 25 MHz/40 MHz Realtime Spectrum Analysis Bandwidth
  • Analog Modulation Analysis and Vector Digital Modulation Analysis
  • Channel power, ACPR, OBW, Harmonics, and TOI measurement option
  • Web Browser for easy Remote Control over LAN

Siglent SSG3000X – RF Signal Generator

  • Frequency ranging from 2.1 GHz to 3.2 GHz
  • Peak output level reaching up to +20 dBm on average
  • Output level spanning from -110 dBm to +13 dBm
  • Precise level accuracy of ≤0.7 dB on average
  • Support for standard AM, FM, PM, and pulse modulation
  • Option for Pulse Train Generator included

Siglent SSG5000A – RF Signal Generator

  • Frequency range extends up to 13.6 GHz / 20 GHz
  • Offers a frequency setting resolution of 0.001 Hz
  • Level setting range spans from -130 dBm to 25 dBm
  • Typical Phase Noise is -120 dBc/Hz @ 1 GHz, 20 kHz offset
  • Typical Level error is ≤ 0.7 dB
  • Supports standard AM, FM, PM, and pulse modulation
  • Option for single pulse, double pulse, and pulse train generator available

Siglent SSG5000X – RF Signal Generator

  • Frequency up to 4 GHz/6 GHz
  • 0.001 Hz frequency setting resolution
  • Maximum output power up to +26 dBm (typ.)
  • Phase Noise: -120 dBc/ Hz @ 1 GHz, 20 kHz offset (typ.)
  • Single pulse, double pulse and pulse train generator (option)

Siglent SSG6000A – Microwave Analog Signal Generator

  • Advanced DDS technology, 125 MSa/s sampling rate, 14-bit vertical resolution
  • Single channel output, 5 standard waveforms, 46 built-in arbitrary waveforms (including DC)
  • Complete modulation functions: AM, DSB-AM, FM, PM, FSK, ASK, PWM, linear/logarithmic sweep, and burst

Siglent SSU5000A Mechanical Switch

  • Maximum frequency: 18 GHz / 26.5 GHz / 50 GHz
  • Configurations: 1 to 4 SPDT switches or 1 to 2 SP6T switch configurations
  • SCPI Controllable via VISA and EasySSU software
  • USB Connectivity
  • Size: W×H×D=153×62.4×137.5mm
  • RF connector: SMA female or 2.4mm female

Siglent SSU5000A Switch Matrix

  • Maximum Frequency Options: 9 GHz / 26.5 GHz
  • Maximum Number of Input Ports: 4
  • Maximum Number of Output Ports: 24
  • RF Connector: 3.5mm female
  • Supports a simplified multi-port calibration algorithm
  • Interface Options: LAN, USB Device, Direct Control (in), Direct Control (out)

Siglent SVA1000X – Spectrum & Vector Analyzer

  • Vector Network Analysis: Now included as standard, covering frequencies from 100 kHz to 3.2 / 7.5 GHz
  • Distance-to-fault: Optional feature
  • Spectrum Analyzer mode: Frequency range extends from 9 kHz to 1.5 / 3.2 / 7.5 GHz
  • Displayed Average Noise Level (Typ.): -156 dBm/Hz / -161 dBm/Hz / -165 dBm/Hz
  • Offset Phase Noise (Typ.): -99 dBc/Hz @10 kHz Offset (1 GHz)
  • Minimum Resolution Bandwidth (RBW): 1 Hz