Showing 865–912 of 923 results

Yokogawa CA71 – Multifunction Calibrator

  • Source and measure operations can be performed at the same time
    (Select from the following source signal and measurement signal options: voltage, current, resistance, thermocouple (TC), resistance temperature detector (RTD),frequency, pulse)
  • AC voltages, including supply voltage, can be measured
  • Divided output (n/m) function, Auto-step function, Sweep function, Memory function and Communication function are available
  • 20 mA SINK Function
  • 4−20 mA Step Function
  • Equivalent Output of TC/RTD and Built-in Reference Junction Compensation Sensor
  • Generation and Measurement of Pulse Generation and Measurement of Voltage Pulse and Contact Pulse
  • Pulse Cycle Function
  • CPM (count/min), CPH (count/hour) Function
  • Memory Function: can handle a maximum of 50 sets of data by means of its built-in memory

Yokogawa CL120 – Mini Clamp-on Testers

  • 3 1/2 digit LCD display
  • 20A range: 2.0%+7dgt (50 to 1kHz) accuracy
  • 200A range: 3.0%+10dgt (40 to 1kHz) accuracy
  • Exclusive model for AC current measurement with current ranges up to 200AAC
  • Lightweight and compact design
  • Measures conductors up to 24mm in diameter
  • Data Hold function
  • Mean value display
  • Approved for conformity to safety standards EN61010-1,EN61010-2-032 (CAT. III 300 V)

Yokogawa CL150 – Clamp-on Testers

  • AC current measurement with current ranges up to 2000A
  • AC/DC voltage and resistance measurements
  • 54mm in diameter of measurable conductor
  • Mean value display
  • DC output function
  • Data hold function
  • Sleep function
  • Approved for conformity to safety standards EN61010-1,
  • EN61010-2-031, EN61010-2-032 (CAT. m 600 V, CAT. II1000 V)

Yokogawa CL155 – Clamp-on Testers

  • AC current measurement with current ranges up to 2000A
  • AC/DC voltage and resistance measurements
  • True RMS display
  • 54mm in diameter of measurable conductor
  • DC output function
  • Data hold function
  • Sleep function
  • Approved for conformity to safety standards EN61010-1, EN61010-2-031, EN61010-2-032 (CAT. HI 600 V, CAT. II1000 V)

Yokogawa CL220 – Clamp-on Testers

  • AC/DC current measurements with current ranges up to 300A
  • 24mm in diameter of measurable conductor
  • Light weight & compact design
  • Mean value display
  • Sleep function
  • Approved for conformity to safety standards EN61010-1, EN61010-2-032 (CAT. III 300 V)

Yokogawa CL235 – Clamp-on Testers

  • True RMS display
  • AC/DC current measurements with current ranges up to 600A for
  • AC and 1000A for DC
  • AC/DC voltage, resistance and frequency measurements 33mm in diameter of measurable conductor
  • Sleep function
  • Data hold function
  • Approved for conformity to safety standards EN61010-1,EN61010-2-031, EN61010-2-032 (CAT. III 600 V)

Yokogawa CL250 – Clamp-on Testers

  • AC/DC current measurements with current ranges up to 2000A
  • AC/DC voltage and resistance measurements
  • DC output
  • 55mm in diameter of measurable conductor
  • Mean value display
  • Sleep function
  • Data hold function
  • Approved for conformity to safety standards EN61010-1, EN61010-2-031, EN61010-2-032 (CAT. III 600 V, CAT. II 1000 V)

Yokogawa CL255 – Clamp-on Testers

  • True RMS display
  • AC/DC current measurements with current ranges up to 2000A
  • AC/DC voltage and resistance measurements
  • DC output
  • 55mm in diameter of measurable conductor
  • Sleep function
  • Data hold function
  • Approved for conformity to safety standards EN61010-1,EN61010-2-031, EN61010-2-032 (CAT. III 600 V, CAT. II 1000 V)

Yokogawa CL320 – Clamp-on Testers

  • Leakage current measurement with current range from 20mA to 200A
  • Light weight and compact design
  • Manual range switching and auto power-off functions
  • 24mm in diameter of measurable conductor
  • Mean value display
  • Auto power-off
  • Manual range switching
  • Approved for conformity to safety standards EN61010-1, EN61010-2-032(CAT. III 300 V)

Yokogawa CL340 – Clamp-on Testers

  • Leakage current measurement with current range from 40mA to 400A
  • Light weight and compact design
  • Manual range switching and auto power-off functions
  • 40mm in diameter of measurable conductor
  • Mean value display
  • Auto power-off
  • Manual range switching
  • Approved for conformity to safety standards EN61010-1, EN61010-2-032(CAT. III 300 V)

Yokogawa CL345 – Clamp-on Testers

  • Leakage current measurement with current range from 40mA to 400A
  • Manual range switching and auto power-off functions
  • 40mm in diameter of measurable conductor
  • True RMS display
  • Auto power-off
  • Manual range switching
  • Approved for conformity to safety standards EN61010-2-032 (CAT. III 300 V)

Yokogawa CL360 – Clamp-on Testers

  • Leakage current measurement with current range from 200mA to 1000A
  • AC and DC output
  • 68mm in diameter of measurable conductor
  • Approved for conformity to safety standards EN 61010-1, EN 61010-2-032 (CAT III 300 V)

Yokogawa CW10 – Clamp-on Power Meter

  • AC / DC Power up to 600 kW, AC / DC Voltage max. 1000 V, AC / DC Current max. 600 A
  • True RMS for AC
  • Harmonics 1st to 25th order
  • Power fluctuation using the ACA Inrush and Peak hold functions
  • Frequency, Resistance, Continuity, Diode check, Power factor
  • Up to 9999 counts, approx. 37mm max. diameter of measurable conductor (the jaw opens approx. 45mm max.)
  • CATIV 600V and CATIII 1000V compliant for safety
  • Backlight on the display area turns on and a white LED automatically illuminates the front of jaw when clamping
  • Non-contact Voltage Detection (Red LED lights up on detection)
  • Easy Operation with the Navigator key
  • Low Pass Filter, Phase Detection, AC / DC Auto Sense

Yokogawa CL420 – Clamp-on Process Meter

  • 0.2% Accuracy, 0.01mA Resolution
  • Dual Display
  • LED Torch Light, Backlight Display
  • Analog Output Available

Yokogawa EY200 – Digital Earth Tester

  • Designed to safety standard IEC 61557
  • Reference to IEC 60529: Degrees of protection provided by enclosures (IP54). Measurement can be made even under adverse weather conditions
  • Large, easy-to-read LCD digital display 1999-count digital reading
  • 2P Test leads (for simplified measurement) has a structure that both the safety alligator clip and the test probe are available
  • Warns when earth resistance of auxiliary earth spikes exceeds the permissible limit
  • Convenient carrying soft bag for accessories etc.
  • 3-Pole Earth Resistance Measurement (Precise Measurement)
  • Earth Resistance: 2000Ω LSD: 0.01 to 1Ω Earth Voltage: 200V

Yokogawa FG400 – Isolated Arbitrary/ Function Generator

  • High accuracy ±(0.05% of full scale)
  • Excellent stability provided by silicon resonant sensor
  • Low temperature coefficient
  • Zero point: ±0.003% of full scale/°C Span: ±0.002% of full scale/°C
  • Divided output function with as many as 20 steps
  • Autostep output function
  • Sweep output function
  • Offset monitor function to present deviation from final value

Yokogawa GS200 – DC Voltage / Current Source

  • Source and sink operation up to 110 V/3.2 A (four-quadrant operation)
  • Basic accuracy: ±0.02% (DC voltage generation)
  • Sweep output at up to 100μs intervals
  • Comes with abundant sweep patterns (linear, logarithmic, and arbitrary)
  • Stores up to 65535 points of source measure data in the internal memory
  • Easy file operation with the USB storage function
  • Remote control and FTP using Web server function (Optional)

Yokogawa GS610 – Source Measure Unit

  • Source and sink operation up to 110 V/3.2 A (four-quadrant operation)
  • Basic accuracy: ±0.02% (DC voltage generation)
  • Sweep output at up to 100μs intervals
  • Comes with abundant sweep patterns (linear, logarithmic, and arbitrary)
  • Stores up to 65535 points of source measure data in the internal memory
  • Easy file operation with the USB storage function
  • Remote control and FTP using Web server function (Optional)

Yokogawa GS820 – Multi Channel Source Measure Unit

  • Isolated 2-channel source and measurement function
  • Source and measurement ranges
    18 V model: 7 V and 3.2 A or 18 V and 1.2 A
    50 V model: 20 V and 1.2 A or 50 V and 0.6 A
  • 1pA resolution at extremely small current range 200 nA
  • Generate arbitrary waveforms consisting of up to
    100000 points at 100 µs intervals
  • Channel expansion through master-slave
    synchronization link
  • Fast test speeds

Yokogawa MC100 – Pneumatic Pressure Standard

  • High accuracy ±(0.05% of full scale)
  • Excellent stability provided by silicon resonant sensor
  • Low temperature coefficient
  • Zero point: ±0.003% of full scale/°C Span: ±0.002% of full scale/°C
  • Divided output function with as many as 20 steps
  • Autostep output function
  • Sweep output function
  • Offset monitor function to present deviation from final value

Yokogawa MY600 – Digital Insulation Tester

  • Featuring enhanced measurement response times of 0.5 seconds and new functionallity for PASS/FAIL Judgement and Polarization Index and Dielectirc Absoprtion Ratio testing
  • Ability to log up to a 1000 data points to internal memory for offline analysis to a PC
  • Automatic LED backlight when working in remote areas with low visibility
  • Large voltage generation and resistance measurement ranges to suit a wide variety of insulaiton types
  • Basic voltage measurement accuracy of +/- 1% of reading and resistance measurement of +/- 2% of reading with the ability to measure up to 4000 MΩ
  • Power off function that minimizes idle time and conserves battery life
  • Built-in auto-ranging for improved resolution at lower resistance levels
  • IP40 Protection Grade for enhanced ruggedness in harsh enviornments

Yokogawa DM7560 – Digital Multimeter

  • Full-color, high-resolution display with flexible display formats
  • High-speed data logging with up to 30 k points per second
  • High-capacity internal memory up to 100 k points
  • Trend / histogram analysis available both in real-time and offline
  • Multiple PC interface options (USB, Ethernet, GP-IB, RS-232) enable automation

Yokogawa TC10 – Temperature Controllers

  • Compact size: 48 x 48 mm (1/16 DIN), depth of 48 mm + 14 mm (terminals)
  • 3 Dynamic Colors Led Display
  • Universal input: (TC, mV, V, mA, Pt100-Pt1000)
  • 4 setpoints and alarm functions
  • PID control, ON/OFF, Auto-tuning
  • IP65 front panel (when the optional panel gasket is mounted)
  • Supports serial communication – RS-485 Modbus/TCP protocol, Ethernet, open networks (CC-Link, PROFIBUS-DP, DeviceNet)

Yokogawa Tough Meter 270 Series – Analog Panel Meters

New Old Stock

No longer manufactured by Yokogawa

Yokogawa stopped manufacturing panel meters in 2017. Limited stock is available at Electro-Meters.
Our panel meter specialists can customize these meters to fit your applications.

  • 2.5″ to 3.5″ size
  • Pivot and Jewel or Taut Band models available
  • Accuracy: ±2% DC, ± 3% AC – rectifier type (60 Hz sine wave)
  • Tracking: ± 1 1/2% DC; ± 2% AC ; vertical mounting
  • Repeatability: ± 2% DC and AC rectifier type
  • Frequency Meters Available

Yokogawa TY520 – Digital Multimeter

  • High Precision
  • Basic accuracy 0.09%
  • True RMS measurement
  • Ensured Field Site Safety
  • Safety shutters preventing erroneous insertion of leads
  • New Functions for Yokogawa Middle Class DMMs
  • Current direct reading function by current clamp sensor (optional)
  • Low-pass Filter (LPF)
  • Logging-mode memory for 1600 data
  • USB communication (Optional communication package)
  • Closed Case Calibration
  • 3-year Warranty

Yokogawa TY530 – Digital Multimeter

  • High Precision
  • Basic accuracy 0.09%
  • True RMS measurement
  • Ensured Field Site Safety
  • Safety shutters for preventing erroneous insertion of test leads
  • New Functions for Yokogawa Middle Class DMMs
  • Current direct reading function – using clamp sensor (optional)
  • Low-pass Filter (LPF)
  • Logging-mode memory for 1600 data
  • USB communication (Optional communication package)
  • Closed Case Calibration
  • 3-year Warranty

Yokogawa TY710 – Digital Multimeter

  • Bandwidth: 20 kHz
  • Basic accuracy 0.020%
  • True RMS measurement
  • New Functions for Electronic and Industrial Use
  • Simultaneous measurement and display of DC and AC
  • Switchable RMS/MEAN detection
  • Low-pass Filter (LPF)
  • AC50mV range
  • Full Support for Data Management
  • A large-capacity logging-mode memory (1,000 data)
  • USB communication, application software
  • 3-year Warranty

Yokogawa CW500 – Power Quality Analyzer

  • Power line and Input Channel: 3 CH Voltage, 4 CH for Current Clamp Probe
  • Capture irregularities in your power system such as voltage sags, dips, swells and log them conveniently to RAM or an SD card
  • Log up to 50th orders of harmonics
  • Vector display for convenient tracking of voltage/current phase relationships
  • Quickly and easily shift between setting up the unit or viewing logged variables and waveforms

Yokogawa TY720 – Digital Multimeter

  • Bandwidth: 100 kHz
  • Basic accuracy 0.020%
  • True RMS measurement
  • New Functions for Electronic and Industrial Use
  • Simultaneous measurement and display of DC and AC
  • Switchable RMS/MEAN detection
  • Low-pass Filter (LPF)
  • AC50mV range
  • Lo-Power resistance measurement
  • Full Support for Data Management
  • USB communication, application software
  • A large-capacity logging-mode memory (10,000 data)
  • 3-year Warranty

Yokogawa UM33A – Digital Indicator with Alarms

  • Up to 9 Alarm outputs
  • Input correction function (PV bias, Polygonal Line approximation, Polygonal line bias)
  • A 14-segment, active (PV display color changing function) color LCD display. A five-digit, high-resolution display with alphabet capability
  • Programmable function keys
  • 65 mm depth The small depth enables the mounting in small panel
  • Dedicated LL50A Parameter Setting Software (sold separately)
  • Quick setting function Setting only the minimum necessary parameters for operation is possible
  • Communications
    • RS-485 (Modbus/RTU, peer to peer, coordinated, PC-Link)
    • Ladder

Yokogawa UP35A – Advanced Programmable Controllers

  • A 14-segment, active (PV display color changing function) color LCD display, Two five-digit, high-resolution displays are possible
  • Up to 4 program patterns with 40 segments per pattern
  • Maximum Analog Inputs: 1
  • Maximum Analog Outputs: 2
  • Maximum Digital Inputs: 8
  • Maximum Digital Outputs: 8
  • Maximum Control Modes: 1
  • Ladder Sequence control (up to 300 steps)
  • Supports serial communication – RS-485 Modbus/TCP protocol, Ethernet, open networks (CC-Link, PROFIBUS-DP, DeviceNet)

Yokogawa UP55A – Advanced Programmable Controllers

  • A 14-segment, active (PV display color changing function) color LCD display, Two five-digit, high-resolution displays are possible
  • Up to 30 program patterns with 99 segments per pattern
  • Maximum Analog Inputs: 4
  • Maximum Analog Outputs: 3
  • Maximum Digital Inputs: 9
  • Maximum Digital Outputs: 18
  • Maximum Control Modes: 5
  • Ladder Sequence control (up to 500 steps)
  • Supports serial communication – RS-485 Modbus/TCP protocol, Ethernet, open networks (CC-Link, PROFIBUS-DP, DeviceNet)

Yokogawa UT32A – Advanced Application Indicating Controllers

  • A 14-segment, active (PV display color changing function) color LCD display, Two five-digit, high-resolution displays are possible
  • Maximum Analog Inputs: 1
  • Maximum Analog Outputs: 2
  • Maximum Digital Inputs: 4
  • Maximum Digital Outputs: 5
  • Maximum Control Modes: 1
  • Ladder sequence capacity up to 300 steps
  • Supports serial communication – RS-485 Modbus/TCP protocol

Yokogawa UT35A – Advanced Application Indicating Controllers

  • A 14-segment, active (PV display color changing function) color LCD display, Two five-digit, high-resolution displays are possible
  • Maximum Analog Inputs: 1
  • Maximum Analog Outputs: 2
  • Maximum Digital Inputs: 7
  • Maximum Digital Outputs: 8
  • Maximum Control Modes: 1
  • Ladder sequence capacity up to 300 steps
  • Supports serial communication – RS-485 Modbus/TCP protocol, Ethernet, open networks (CC-Link, PROFIBUS-DP, DeviceNet)

Yokogawa UT35A-L – Limit Control Type Digital Indicating Controllers

  • A 14-segment, active (PV display color changing function) color LCD display, Two five-digit, high-resolution displays are possible
  • Control type : high limit or low limit
  • 3 Alarm outputs
  • Supports RS-485, Ethernet

Yokogawa UT52A – Advanced Application Indicating Controllers

  • A 14-segment, active (PV display color changing function) color LCD display, Two five-digit, high-resolution displays are possible
  • Maximum Analog Inputs: 2
  • Maximum Analog Outputs: 3
  • Maximum Digital Inputs: 5
  • Maximum Digital Outputs: 5
  • Maximum Control Modes: 8
  • Ladder sequence capacity up to 500 steps
  • Supports RS-485

Yokogawa UT55A – Advanced Application Indicating Controllers

  • A 14-segment, active (PV display color changing function) color LCD display, Two five-digit, high-resolution displays are possible
  • Maximum Analog Inputs: 4
  • Maximum Analog Outputs: 3
  • Maximum Digital Inputs: 9
  • Maximum Digital Outputs: 18
  • Maximum Control Modes: 8
  • Ladder sequence capacity up to 500 steps
  • Supports RS-485, Ethernet, open networks (CC-Link, PROFIBUS-DP, DeviceNet)

Yokogawa UT75A – Advanced Application Indicating Controllers

  • A 14-segment, active (PV display color changing function) color LCD display, Two five-digit, high-resolution displays are possible
  • Maximum Analog Inputs: 4
  • Maximum Analog Outputs: 3
  • Maximum Digital Inputs: 8
  • Maximum Digital Outputs: 8
  • Maximum Control Modes: 9
  • Ladder sequence capacity up to 1,000 steps
  • Supports RS-485, Ethernet, open networks (CC-Link, PROFIBUS-DP, DeviceNet)

Yokogawa WT1800E – High Performance Power Analyzer

  • Sample Rate: 2MS/s
  • Power Bandwidth: 0.1Hz-1 MHz
  • Resolution: 16 bit
  • Elements: 1-6
  • Accuracy: 0.05%
  • 8.4″ TFT LCD monitor

Yokogawa WT300E – Compact Power Analyzer

  • Sample Rate: 100 kS/s
  • Power Bandwidth: 0.1 Hz-100 kHz
  • Resolution: 16 bit
  • Elements: 1-3
  • Accuracy: 0.15%

Yokogawa GA10 Data Logging Software

GA10 is PC-based data logging application software for monitoring and recording by connecting devices distributed in a factory or on the premises via Ethernet network. The centralization of PCs will improve the efficiency of monitoring and recording operations and reduce the burden.

  • Collecting data can be prepared in 3 steps
  • Unified monitoring using custom screens tailored to uses
  • Cost-savings through demand monitoring

Yokogawa IS8000 Integrated Software Platform

The IS8000 software platform is an integrated solution that accelerates engineering workflow. It is a revolutionary software that tightly integrates the timing, control, and data collection from multiple instruments, creating a comprehensive measurement suite that delivers confidence, efficiency, and unity.

Yokogawa WT500 – Mid-Range Power Analyzer

  • Sample Rate: 100 kS/s
  • Power Bandwidth: 0.5 Hz-100 kHz
  • Resolution: 16 bit
  • Elements: 1-6
  • Accuracy: 0.10%
  • 5.7″ TFT LCD monitor

Yokogawa Y Series – Elapsed Time Meters

  • Reset or non-reset models available
  • Window mount models available
  • Units meet ANSI spec C39.1
  • Units meet UL file #E44857 and CSA
  • 6 digit counters read in hours, tenths of hours, minutes and tenths of minutes
  • Weather resistant
  • 2-1/2″ and 3-1/2″ Big Look models
  • 2-1/2″ and 3-1/2″ round and square models
  • Conduit case models available
  • Proven design
  • Accuracy: Matches frequency control of power system
  • Input: 120, 208, 240, 480 VAC at 50 or 60 Hz
  • Optional 3 stud mounting is available on 31⁄2″
  • Complete interchangeability physically and electrically with most GE Types 235 and 236 models

Yokogawa 103 Series – Switchboard Elapsed Time Meters

New Old Stock

No longer manufactured by Yokogawa

Yokogawa stopped manufacturing panel meters in 2017. Limited stock is available at Electro-Meters.
Our panel meter specialists can customize these meters to fit your applications.

  • Units meet ANSI spec C39.1
  • Units meet UL file #E44857 and CSA
  • 6 digit counters read in hours, tenths of hours, minutes and tenths of minutes
  • Weather resistant
  • Reset or non-reset models available
  • Conduit case models available
  • Accuracy: Matches frequency control of power system
  • Input: 120, 208, 240, 480 VAC at 50 or 60 Hz

Yokogawa 123 Series – Dual-Vue Switchboard Meters

New Old Stock

No longer manufactured by Yokogawa

Yokogawa stopped manufacturing panel meters in 2017. Limited stock is available at Electro-Meters.
Our panel meter specialists can customize these meters to fit your applications.

  • 4.5″ size
  • Features analog and digital display to provide the ultimate in readability of power and control parameters.
  • A drop-in replacement for upgrade of existing control and switchgear panels.
  • Digital and Analog ( two in one ) Switchboard meter
  • Rugged switchboard style case and IP54 rated cover
  • Choice of high-intensity LED digital displays with high reliability analog movements

Yokogawa 185 Series – Edgewise Panel Meters

New Old Stock

No longer manufactured by Yokogawa

Yokogawa stopped manufacturing panel meters in 2017. Limited stock is available at Electro-Meters.
Our panel meter specialists can customize these meters to fit your applications.

  • 2.5″ size
  • Accuracy: ±2%
  • ± 3% AC – rectifier type (60 Hz sine wave)
  • Tracking: ± 1 1/2% DC
  • Repeatability: ± 0.5% DC and rectifier type
  • Dust-tight
  • Shielded cover
  • Stackable
  • Orientation: Horizontal, Vertical or specified mounting angle
  • Compact design provides the answer to “space” problems
  • They can stand alone or be stacked in space-saving clusters
  • UL models available

Yokogawa 2180 Series – Mini Switchboard Meters

New Old Stock

No longer manufactured by Yokogawa

Yokogawa stopped manufacturing panel meters in 2017. Limited stock is available at Electro-Meters.
Our panel meter specialists can customize these meters to fit your applications.

  • 3.5″ size
  • 250 degree scale deflection
  • LED illuminated versions available in Red, White
  • DC Meters accurate to within ±1% of full scale
  • AC Meters accurate to within ±1.5% of full scale
  • Tracking: ± 1 1/2% DC; ± 2% AC ; vertical mounting
  • Repeatability: ± 0.5% DC
  • Size: 3 1/4W” x 3 1/4L” x 4″ D
  • Shock-resistant pivot and jewel movement
  • UL and IP54 splash-proof models available
  • In accordance with ANSI C39.1
  • Optional LED Illumination