Through its USB, LAN, and HDMI interfaces, the DNA800 Series enables accurate measurement and analysis of microwave network characteristics, including amplitude versus frequency, phase versus frequency, and group delay.

Combining high-end performance with a compact and lightweight design, the DNA800 Series delivers low-noise operation and an intuitive display and software interface for an enhanced user experience. It is well suited for R&D and production applications across electronics, communications, and microwave engineering.

Features

• Frequency Range: 5 kHz to 14 GHz
• Number of Ports: 2
• Frequency Resolution: 1 Hz
• Maximum Output Power: 10 dBm
• High Dynamic Range: 125 dB (typ.)
• Trace Noise: 0.005 dB_rms
• IF Bandwidth: 1 Hz to 3 MHz
• Compatible with mechanical and electronic (ECal) calibration kits, supporting multiple calibration
  types, including SOLT, Response Short, Response Open, OSL, Enhanced Response 1 to 2, and
  Response Through
• Integrated measurement functions including S-parameters, impedance, VSWR, TDA,
  fixture embedding/de-embedding, antenna testing, and more
• Portable Design: Compact and lightweight with a built-in handle; dimensions of
  265.35 mm (W) × 161.75 mm (H) × 77.38 mm (D) and a weight of 1.9 kg
• Display: 7-inch 1024 × 600 HD touchscreen
• Interfaces: LAN, USB Device, USB Host, and HDMI
• Supports standard SCPI command sets
• Supports Web Control for remote operation
• Supports both physical-key and touchscreen operation, with external keyboard and mouse support
  for convenient value entry

The post Rigol DNA800 Series – Vector Network Analyzer appeared first on Electro-Meters.

Designed for system integration and application flexibility, the RSA800 Series provides extensive expansion capabilities through multiple digital and analog output interfaces, supporting test system integration and secondary development. Its compact, portable design makes it well suited for laboratory, educational, and field-testing environments, while power bank support enables convenient mobile testing.

With reliable performance and flexible operating modes, the RSA800 Series is suitable for R&D, production, and maintenance testing across a variety of industries, including wireless communications, automotive electronics, and the Internet of Things (IoT).

Features

• Six operating modes: GPSA, RTSA, VSA, EMI, ADM, and PNOISE
• Frequency range: 5 kHz to 14 GHz
• Excellent displayed average noise level (DANL)
• Low phase noise for high-quality signal analysis
• High-precision amplitude measurements
• Multiple analysis bandwidth options
• Excellent spurious-free dynamic range (SFDR)
• Powerful real-time spectrum analysis capabilities
• Multi-pane display for viewing different measurement results simultaneously
• Built-in tracking generator output
• Dimensions: 265.35 mm (W) × 161.75 mm (H) × 77.38 mm (D)
• Interfaces: USB, LAN, and HDMI
• Power supply: Type-C adapter; supports power bank operation
• Supports standard SCPI command sets

The post Rigol RSA800 Series – Spectrum Analyzers appeared first on Electro-Meters.

Features

• UL recognized – file number E532782
• CSA approved
• Applicable standard: ANSI/IEEE C57.13
• Case: 10% glass filled polycarbonate, flame retardant grades classified UL 94V-0.
• Frequency: 50–400 Hz
• Insulation Level: 600 Volts, 10KV BIL full wave
• Terminals are brass studs No. 10-32 UNF with one flat washer, lockwasher, and regular nut
• Mounting kit available upon request

Application

• Relaying and metering

The post Electro-Meters 143 Series – Low Voltage Current Transformers appeared first on Electro-Meters.

Features

• UL Recognized – File No. E532782
• CSA Approved
• Applicable standard: ANSI/IEEE C57.13
• Case: 10% glass filled polycarbonate, flame retardant grades classified UL 94V-0.
• Frequency: 50–400 Hz
• Insulation Level: 600 Volts, 10KV BIL full wave
• Flexible leads are rated UL 1015, 105 Deg C, CSA approved, #16 AWG, 24” in length
• Non-standard length to be specified
• For all the SHT & SFT types terminals are brass studs No. 8-32 with one flat washer, lock washer & regular nut
• All the SHT & SFT models also available as SHL & SFL with leads
• For all the SHT types — mounting bracket kit when required

Applications

Suitable for use with:

• Ammeters
• Wattmeters
• Cross-current compensation systems

The post Electro-Meters 7 Series – Low Voltage Current Transformers appeared first on Electro-Meters.

Features

• UL Recognized – File No. E532782
• CSA Approved
• Applicable standard: ANSI/IEEE C57.13
• Case: 10% glass filled polycarbonate, flame retardant grades classified UL 94V-0.
• Frequency: 50–400 Hz
• Insulation Level: 600 Volts, 10KV BIL full wave
• Flexible leads are rated UL 1015, 105 Deg C, CSA approved, #16 AWG, 24” in length
• Non-standard length to be specified
• For all the SHT & SFT types terminals are brass studs No. 8-32 with one flat washer, lock washer & regular nut
• All the SHT & SFT models also available as SHL & SFL with leads
• For all the SHT types — mounting bracket kit when required

Applications

Suitable for use with:

• Ammeters
• Wattmeters
• Cross-current compensation systems

The post Electro-Meters 6 Series – Low Voltage Current Transformers appeared first on Electro-Meters.

Features

• UL Recognized – File No. E532782
• CSA Approved
• Applicable standard: ANSI/IEEE C57.13
• Case: 10% glass filled polycarbonate, flame retardant grades classified UL 94V-0.
• Frequency: 50–400 Hz
• Insulation Level: 600 Volts, 10KV BIL full wave
• Flexible leads are rated UL 1015, 105 Deg C, CSA approved, #16 AWG, 24” in length
• Non-standard length to be specified
• For all the SHT & SFT types terminals are brass studs No. 8-32 with one flat washer, lock washer & regular nut
• All the SHT & SFT models also available as SHL & SFL with leads
• For all the SHT types — mounting bracket kit when required

Applications

Suitable for use with:

• Ammeters
• Wattmeters
• Cross-current compensation systems

The post Electro-Meters 5 Series – Low Voltage Current Transformers appeared first on Electro-Meters.

Features

• UL Number E532782
• CSA Approved
• Applicable standard : ANSI/IEEE C57.13
• Case : 10% glass filled polycarbonate, flame retardant grades classified UL 94V-0.
• Frequency : 50-400 Hz
• Insulation Level : 600 Volts, 10KV BIL fill wave
• Flexible leads are rated UL 1015, 105 Deg C, CSA approved, #16 AWG, 24” in length
• Non-standard length to be specified
• For all the SHT & SFT types terminals are brass studs No. 8-32 with one flat washer, lock washer & regular nut
• All the SHT & SFT models also available as SHL & SFL with leads
• For all the SHT types- mounting bracket kit when required

Application

• With ammeters, wattmeters, and cross current compensation.

The post Electro-Meters 2 Series – Low Voltage Current Transformers appeared first on Electro-Meters.

Features:

• Dual channels, maximum output frequency of 200 MHz, and up to 20 Vpp output amplitude
• 1.2 GSa/s sampling rate with 16-bit vertical resolution
• TrueArb technology for point-by-point arbitrary waveform output with low jitter (10 mSa/s ~ 600 MSa/s)
• Sequence wave playback supported, with up to 40 Mpts waveform memory per channel
• EasyPulse technology enables low-jitter square/pulse wave output with fine control over width and edges
• Dual pulse output function for evaluating dynamic characteristics of power devices
• Supports PRBS (Pseudo-Random Binary Sequence) up to 120 Mbps
• Extensive modulation capabilities: AM, DSB-SC, FM, PM, FSK, ASK, PSK, PWM
• Sweep and Burst functionality
• Harmonic and waveform combining functions
• High-precision frequency counter
• 196 built-in arbitrary waveforms
• Standard interfaces: USB Host, USB Device (USBTMC), LAN (VXI-11); optional GPIB
• Built-in WebServer allows control via web browser
• 7-inch touchscreen display

The post Siglent SDG3000X – Arbitrary Waveform Generator appeared first on Electro-Meters.

Features

• 5-inch true color TFT-LCD display (800 × 480 resolution) with touchscreen and redesigned user interface
• Real 6½-digit (2,200,000 count) measurement resolution
• Measurement speed up to 50,000 readings/second, with sampling intervals ranging from 100 PLC to 0.001 PLC
• 512 MB RAM supports caching up to 2 million readings with timestamp support
• 256 MB NAND Flash for storing readings, images, and configuration files
• Four trigger modes: Auto, Single, External, and Level Trigger
• Four display modes: Numerical, Bar Meter, Trend Chart, and Histogram
• DC measurements support auto-zero function
• True-RMS measurement for AC Voltage and AC Current
• Automatic switching between 10 A (high) and 3 A (low) current modes; supports up to 30 A with external shunt
• Supports RTD, thermocouple, and user-defined sensors
• Dual display and probe hold functionality
• Supports standard SCPI remote control commands
• Bundled with EasyDMM-X host control and data acquisition software
• Communication interfaces: USB Device (optional USB-GPIB adapter), USB Host, and LAN
• Supports BNC VMC output and trigger input
• Remote access via VNC and built-in web server
• Multilingual menu (Chinese/English) with built-in help system for easy information retrieval

The post Siglent SDM4065A Series – Digital Multimeter appeared first on Electro-Meters.

• Adopts Silicon Carbide (SiC) technology
• High power density design: up to 15kVA in 3U, up to 6kVA in 2U
• Voltage rating: 350V L-N
• Harmonic simulation and analysis up to the 50th order
• Output frequency: 16–1000Hz; adjustable voltage and frequency slew rate
• Built-in single-phase or three-phase AC power meter
• Supports four output modes: AC, DC, AC+DC, DC+AC
• Selectable single-phase or three-phase output modes
• Programmable output impedance
• Touchscreen interface with a clean UI design
• Arbitrary waveform simulation, supports CSV waveform import
• Built-in rich waveform database
• List mode simulates power grid restoration and momentary power interruption
• Configurable output start/stop phase angle from 0–360°
• Built-in Surge & Sag simulation
• Built-in Relay Ctrl output for DUT and source electrical isolation
• Built-in USB/CAN/LAN/Digital I/O; optional
• GPIB/Analog/RS232 interfaces
• Supports CANopen, Modbus, LXI, SCPI, and other communication protocols

Applications

• New energy (onboard chargers, AC/DC chargin piles)
• Home appliances (air conditioners, microwave ovens, refrigerators, washing machines)
• Medical equipment (CT scanners, MRI systems, life science analyzers)
• Power electronics (Inverts, UPS systems, AC motors)
• Civil aviation (avionics, airport ground support equipment)
• Research, Universities, Laboratories, Testing Organizations (AC-DC power adapter testing, EMC compliance testing)

The post ITECH IT-EC7800 Series – Programmable AC/DC Power Supply appeared first on Electro-Meters.