Transducteurs de puissance, de tension et de courant | Électromètres https://www.electro-meters.com/product-category/transducers/ Technology for all your measurement needs Wed, 27 Sep 2023 17:39:15 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.electro-meters.com/wp-content/uploads/images/electro-meters/cropped-EMlogo_square-32x32.png Transducteurs de puissance, de tension et de courant | Électromètres https://www.electro-meters.com/product-category/transducers/ 32 32 Hsiang Cheng FPWK – Watt/Var Transducers https://www.electro-meters.com/product/hsiang-cheng-fpwk-watt-var-transducers/ Wed, 27 Sep 2023 16:12:47 +0000 https://www.electro-meters.com/?post_type=product&p=22690
  • The FP series are wall mounted electrical power transducers designed for general industry applications
  • Manufactured to strict compliance IEC 688
  • The input & output parameters are pre-selected from a wide range of industry compatible signals and other non-stated ranges are available on request or as options
  • Accuracy ( 23±3°C ): 0.2% reading / PF ± 0.05% RO
  • High impulse & surge protection of up to 4KV (RMS) meeting IEC 255-3
  • Various phase, wire, and element configurations

    • The post Hsiang Cheng FPWK – Watt/Var Transducers appeared first on Electro-Meters.

    ]]>     The HC FP series transducers comprise a group of metallic casing transducers designed for the measurement and conversion of IEC 688/1992-04 standards, and they are specifically designed for wall-mounted installation.

    Different models indicate the transducer’s phase, wire, and element configuration.

    • FPWK101 is the one phase two wires 1 element active(WATT) and reactive(VAR) power transducer with two outputs.
    • FPWK201 is the three phase three wires 2 elements unbalance active(WATT) and reactive(VAR) power transducer with two outputs.
    • FPWK211 is the three phase four wires 2.5 elements unbalance active(WATT) and reactive(VAR) power transducer with two outputs.
    • FPWK301 is the three phase four wires 3 elements unbalance active(WATT) and reactive(VAR) power transducer with two outputs.

    The post Hsiang Cheng FPWK – Watt/Var Transducers appeared first on Electro-Meters.

    ]]>         Hsiang Cheng FPA – AC Current Transducers https://www.electro-meters.com/product/hsiang-cheng-fpa-ac-current-transducers/ Tue, 26 Sep 2023 14:35:45 +0000 https://www.electro-meters.com/?post_type=product&p=22679
  • The FP series are wall mounted electrical power transducers designed for general industry applications
  • Manufactured to strict compliance IEC 688
  • The input & output parameters are pre-selected from a wide range of industry compatible signals and other non-stated ranges are available on request or as options
  • Accuracy ( 23±3°C ): 0.2% RO
  • High impulse & surge protection of up to 5KV (RMS) meeting IEC 255-4

    • Buy Online

    The post Hsiang Cheng FPA – AC Current Transducers appeared first on Electro-Meters.

    ]]>     The HC FP series transducers comprise a group of metallic casing transducers designed for the measurement and conversion of IEC 688/1992-04 standards, and they are specifically designed for wall-mounted installation.

    The post Hsiang Cheng FPA – AC Current Transducers appeared first on Electro-Meters.

    ]]>         Hsiang Cheng FPV – AC Voltage Transducers https://www.electro-meters.com/product/hsiang-cheng-fpv-ac-voltage-transducers/ Tue, 26 Sep 2023 13:23:42 +0000 https://www.electro-meters.com/?post_type=product&p=22677
  • The FP series are wall mounted electrical power transducers designed for general industry applications
  • Manufactured to strict compliance IEC 688
  • The input & output parameters are pre-selected from a wide range of industry compatible signals and other non-stated ranges are available on request or as options
  • Accuracy ( 23±3°C ): 0.2% RO
  • High impulse & surge protection of up to 5KV (RMS) meeting IEC 255-4

    • Buy Online

    The post Hsiang Cheng FPV – AC Voltage Transducers appeared first on Electro-Meters.

    ]]>     The HC FP series transducers comprise a group of metallic casing transducers designed for the measurement and conversion of IEC 688/1992-04 standards, and they are specifically designed for wall-mounted installation.

    The post Hsiang Cheng FPV – AC Voltage Transducers appeared first on Electro-Meters.

    ]]>         DEIF TAS-331DG – Selectable Transducer https://www.electro-meters.com/product/deif-tas-331dg-selectable-transducer/ Tue, 27 Jul 2021 20:29:46 +0000 https://www.electro-meters.com/?post_type=product&p=16230
  • Measures bi-directional current on AC networks
  • Class 0.5 measurement
  • Supply and measuring voltage up to 690 V
  • Pre-configuration or easy PC tool configuration
  • Configurable up to three output slopes

    • The post DEIF TAS-331DG – Selectable Transducer appeared first on Electro-Meters.

    ]]>     Powerful, fast and compact, the TAS units in DEIF’s transducer range measure power or reactive power on a 1- or 3-phase AC network and provide output signal as direct current or voltage signal proportional to measurements for PLCs, PCs, microprocessor control, indicators, alarm units etc.

    TAS transducer ranges are micro-controller-based with one analogue output for measurement of power, voltage, current etc. on an AC network. Because these transducer rangers have no mechanical parts like potentiometers, the calibration stability is excellent.

    TAS transducers range can be delivered pre-configured to set measuring values and ranges or un-configured for customer configuration using DEIF’s free PC tool.

    Variants

    TAS-311DG

    • Factory-configured transducer for voltage, current, frequency or phase angle measurement.
    • Aux supply: from 57 to 690 V AC.
    • Aux supply: 24 to 220 V DC.

    TAS-321DG

    • Factory-configured transducer for bidirectional current measurement.
    • Aux supply: from 57 to 690 V AC.
    • Aux supply: 24 to 220 V DC.

    TAS-331DG

    • Factory-configured transducer for power or reactive power measurement.
    • Aux supply: from 57 to 690 V AC.
    • Aux supply: 24 to 220 V DC.

    The post DEIF TAS-331DG – Selectable Transducer appeared first on Electro-Meters.

    ]]>         DEIF TAS-321DG – Selectable Transducer https://www.electro-meters.com/product/deif-tas-321dg-selectable-transducer/ Tue, 27 Jul 2021 19:59:09 +0000 https://www.electro-meters.com/?post_type=product&p=16227
  • Measures bi-directional current on AC networks
  • Class 0.5 measurement
  • Supply and measuring voltage up to 690 V
  • Pre-configuration or easy PC tool configuration
  • Configurable up to three output slopes

    • The post DEIF TAS-321DG – Selectable Transducer appeared first on Electro-Meters.

    ]]>     Powerful, fast and compact, the TAS units in DEIF’s transducer range measure sinusoidal alternating voltage and/or current signal and provide output signal as direct current or voltage signal proportional to measurements for PLCs, PCs, microprocessor control, indicators, alarm units etc.

    TAS transducers are micro-controller-based with one analogue output for measurement of power, voltage, current etc. on an AC network. Because these transducers have no mechanical parts like potentiometers, the calibration stability is excellent.

    TAS transducers can be delivered pre-configured to set measuring values and ranges or un-configured for customer configuration using DEIF’s free PC tool.

    Variants

    TAS-311DG

    • Factory-configured transducer for voltage, current, frequency or phase angle measurement.
    • Aux supply: from 57 to 690 V AC.
    • Aux supply: 24 to 220 V DC.

    TAS-321DG

    • Factory-configured transducer for bidirectional current measurement.
    • Aux supply: from 57 to 690 V AC.
    • Aux supply: 24 to 220 V DC.

    TAS-331DG

    • Factory-configured transducer for power or reactive power measurement.
    • Aux supply: from 57 to 690 V AC.
    • Aux supply: 24 to 220 V DC.

    The post DEIF TAS-321DG – Selectable Transducer appeared first on Electro-Meters.

    ]]>         DEIF TAS-311DG – Selectable Transducer https://www.electro-meters.com/product/deif-tas-311dg-selectable-transducer/ Tue, 27 Jul 2021 19:24:45 +0000 https://www.electro-meters.com/?post_type=product&p=16218
  • Measures voltage, current, frequency and phase angle on AC networks
  • Class 0.5 measurement
  • Supply and measuring voltage up to 690 V
  • Pre-configuration or easy PC tool configuration
  • Configurable up to three output slopes

    • The post DEIF TAS-311DG – Selectable Transducer appeared first on Electro-Meters.

    ]]>     Powerful, fast and compact, the TAS units in DEIF’s transducer range measure sinusoidal alternating voltage and/or current signal and provide output signal as direct current or voltage signal proportional to measurements for PLCs, PCs, microprocessor control, indicators, alarm units etc.

    TAS transducers are micro-controller-based with one analogue output for measurement of voltage, current, frequency and phase angle on an AC network. Because these transducers have no mechanical parts like potentiometers, the calibration stability is excellent.

    TAS transducers can be delivered pre-configured to set measuring values and ranges or un-configured for customer configuration using DEIF’s free PC tool.

    Variants

    TAS-311DG

    • Factory-configured transducer for voltage, current, frequency or phase angle measurement.
    • Aux supply: from 57 to 690 V AC.
    • Aux supply: 24 to 220 V DC.

    TAS-321DG

    • Factory-configured transducer for bidirectional current measurement.
    • Aux supply: from 57 to 690 V AC.
    • Aux supply: 24 to 220 V DC.

    TAS-331DG

    • Factory-configured transducer for power or reactive power measurement.
    • Aux supply: from 57 to 690 V AC.
    • Aux supply: 24 to 220 V DC.

    The post DEIF TAS-311DG – Selectable Transducer appeared first on Electro-Meters.

    ]]>         DEIF MTR-4 – Multi-transducer https://www.electro-meters.com/product/deif-mtr-4-multi-transducer/ Tue, 27 Jul 2021 19:12:21 +0000 https://www.electro-meters.com/?post_type=product&p=16215
  • Suitable for all 1- and 3-phase network topologies
  • Up to 1,000 VL-L AC input
  • Accuracy class: 0.5 or 0.3
  • Up to 4 analogue outputs
  • Fast response time, less than 50 ms
  • Measures more than 50 parameters
  • RS-485 serial Modbus communication
  • Fully configurable by USB, no aux. supply required
  • Universal power supply of 19 to 300 V DC/40 to 276 V AC

    • The post DEIF MTR-4 – Multi-transducer appeared first on Electro-Meters.

    ]]>     Efficient, fast and flexible, the programmable MTR-4 transducer offers the same performance as up to four standard transducers, measuring and calculating AC voltage, AC current, active/reactive apparent power, power factor, frequency, kWh, kvar, THD, dynamic and maximum demands.

    Designed for use together with PLCs or analogue instruments, the MTR-4 measures, analyses and monitors single-phase or three-phase electrical power networks that require marine approval.

    MTR-4 has up to four analogue outputs which can be set individually, and the response time is less than 50 ms. Output characteristics can be programmed with up to five breaking point output signals.

    With configurable outputs for more than 50 parameters and a universal power supply (19-300 V DC, 40-276 V AC), it is possible to stock DEIF’s transducers with future installations and reconfiguration for almost any application in view. Simply connect a USB 2.0 interface for fast and easy configuration of up to four analogue outputs.

    Variants

    MTR-4 015

    • Analogue outputs: 0
    • RS-485 Modbus

    MTR-4 105

    • Analogue outputs: 1

    MTR-4 215

    • Analogue outputs: 2
    • RS-485 Modbus

    MTR-4 315

    • Analogue outputs: 3
    • RS-485 Modbus

    MTR-4 415

    • Analogue outputs: 4
    • RS-485 Modbus

    The post DEIF MTR-4 – Multi-transducer appeared first on Electro-Meters.

    ]]>         Sifam Tinsley Theta 30P – Electrical Transducers https://www.electro-meters.com/product/sifam-tinsley-theta-30p-electrical-transducers/ Wed, 26 May 2021 14:15:27 +0000 https://www.electro-meters.com/?post_type=product&p=11407
  • Available in Single or Dual output type
  • On-site selectable output type (DC current / DC voltage)
  • Accuracy class 0.2 (IEC/ EN 60 688)
  • Seven Segment LCD Display
  • RS-485(Modbus) Communication

    • The post Sifam Tinsley Theta 30P – Electrical Transducers appeared first on Electro-Meters.

    ]]>     Theta 30P is a compact, multi-function panel mount power quality monitor, which measures, calculates and displays major electrical parameters of three phase power system. The Theta 30P programmable transducer series measure and convert active, reactive and apparent power of a single-phase or three-phase AC system with balanced or unbalanced loads. The output signal is proportional to the measured value of the active or reactive power and is either load-independent DC Voltage or DC Current output signal. The Theta 30P transducer is field programmable and/or data can be retrieved via optional 7 segment LCD display with backlit keypad or connecting a PC with RS232 interface and PRKAB601 adapter connected to the Theta 30P’s front panel programming connector, or simply networked via the RS485 port.

    Applications

    • Generation and Industrial applications – measuring power quantities and providing a proportional (real-time) analog signal
    • Power/Energy & Load monitoring
    • OEM Applications

    The post Sifam Tinsley Theta 30P – Electrical Transducers appeared first on Electro-Meters.

    ]]>         Sifam Tinsley Theta 20A & 20V – Electrical Transducers https://www.electro-meters.com/product/sifam-tinsley-theta-20a-20v-electrical-transducers/ Wed, 26 May 2021 14:01:28 +0000 https://www.electro-meters.com/?post_type=product&p=11405
  • Available in Single or Dual output type
  • On-site selectable output type (DC current / DC voltage)
  • Accuracy class 0.2 (IEC/ EN 60 688)
  • Seven Segment LCD Display
  • RS-485(Modbus) Communication

    • The post Sifam Tinsley Theta 20A & 20V – Electrical Transducers appeared first on Electro-Meters.

    ]]>     Theta 20A/20V is used to measure and convert AC Voltage or Current input into a load independent DC current or voltage output signal. The DC process signals can be used for direct input into monitoring systems such as recorders, data acquisition systems, panel monitoring instruments etc. The Theta 20A/20V transducers process True RMS signals, providing accurate readings for signals that contain harmonic distortion. The input signal is converted into a load independent signal and the output signal generated is proportional to the mean root square value of the input current value.

    Applications

    • Generation and Industrial applications – measuring power quantities and providing a proportional (real-time) analog signal
    • Manufacturing and OEM Application

    The post Sifam Tinsley Theta 20A & 20V – Electrical Transducers appeared first on Electro-Meters.

    ]]>         Magtrol Displacement Transducers https://www.electro-meters.com/product/magtrol-displacement-transducers/ Thu, 13 May 2021 16:10:37 +0000 https://www.electro-meters.com/?post_type=product&p=11172 Magtrol’s line of Displacement Transducers provide contactless measurement of absolute piston position in hydraulic and pneumatic cylinders and other applications. Their robust construction, large insensitivity to shocks and very long life (due to no moving parts and therefore no wear of components) make them both cost effective and very reliable.

    The post Magtrol Displacement Transducers appeared first on Electro-Meters.

    ]]>

    Displacement Transducer

    Magtrol’s line of Displacement Transducers provide contactless measurement of absolute piston position in hydraulic and pneumatic cylinders and other applications. Their robust construction, large insensitivity to shocks and very long life (due to no moving parts and therefore no wear of components) make them both cost effective and very reliable. Magtrol transducers offer a wide range of operational temperatures and admissible pressure resistance for even the most demanding applications.

    More Information

    Signal Converter

    To complete your displacement measurement system Magtrol offers the CST 113 Signal Converter, designed specifically for transducers delivering a signal of 4 to 20 mA. Either a voltage-based signal (I/U conversion) or a current-based signal (I/I) can be chosen as the converter output, along with signal inversion if required. A large variety of offset and gain values can be selected, matching all sorts of specific applications. The use of micro switches (DIP switches) and potentiometers enable easy on-site adjustments and the independent settings make it possible to calibrate the CST 113 in one displacement, from the minimal to the maximum position of the jack.

    More Information

    The post Magtrol Displacement Transducers appeared first on Electro-Meters.

    ]]>