Hawkeye Relay Combination series high voltage output current switches are the ideal solution for the automation installer. These units combine a current switch and relay into a single package, reducing the space required for total control of fans and pumps. The integrated current switch and relay operate independently of one another. These products perform the functions of start/stop and status monitoring with one device instead of two.

• Combines command relay and fan/pump status sensor in a single, easy-to-install unit
• Polarity insensitive status outputs – fast and easy installation
• Easy setup – relay and status LEDs
• No tubing – easier to install than differential pressure switches
• Detect belt loss and motor failure – ideal for fan and pump status
• Added flexibility – bracket on H959 can be installed in three different configurations

The post Veris Hawkeye H959 – Current Switch appeared first on Electro-Meters.

The Hawkeye relay combination series is the ideal solution for the automation installer. These units combine a current switch and relay into a single package, reducing the space required for total control of fans and pumps. The current switch and relay operate independently of one another. These devices allow start/stop control and status monitoring with one device instead of two.

• Combined relay and status – combines command relay and fan/pump status sensor in a single, easy-to-install unit
• Fan and pump status – detect belt loss and motor failure ideal for fan and pump status
• Polarity insensitive status outputs – fast and easy installation
• Two outputs – H948 feature a SPDT command relay control two outputs with a single relay
• Added flexibility – bracket on H958 can be installed in three different configurations
• Easy setup – relay and status LEDs
• Induced from monitored conductor sensor power

The post Veris Hawkeye H958 – Current Switch appeared first on Electro-Meters.

The Hawkeye relay combination series combines an on/off status sensor and command relay in one package, saving the labor, wire runs and space required to mount a separate relay. The switch and relay (not electrically connected) are in the same housing, saving space and cost. It is ideal for monitoring and controlling motors where belt loss is not a concern.

• On/off status and command relay in a single labor and space saving device
• Detect belt loss – cost-effectively monitor start/stop, unit vents, fan coils, exhaust fans, and other loads where belt loss is not a concern
• Easy setup – no calibration required easy setup and operation
• No tubing necessary – easier to install than differential pressure switches
• Induced from monitored conductor sensor power

The post Veris Hawkeye H950 – Current Switch appeared first on Electro-Meters.

The Hawkeye relay combination series is the ideal solution for the automation installer. These units combine a current switch and relay into a single package, reducing the space required for total control of fans and pumps. The current switch and relay operate independently of one another. These devices allow start/stop control and status monitoring with one device instead of two.

• Combined relay and status – combines command relay and fan/pump status sensor in a single, easy-to-install unit
• Fan and pump status – detect belt loss and motor failure ideal for fan and pump status
• Polarity insensitive status outputs – fast and easy installation
• Two outputs – H948 feature a SPDT command relay control two outputs with a single relay
• Added flexibility – bracket on H948 can be installed in three different configurations
• Easy setup – relay and status LEDs
• Induced from monitored conductor sensor power

The post Veris Hawkeye H949 – Current Switch appeared first on Electro-Meters.

The Hawkeye relay combination series is the ideal solution for the automation installer. These units combine a current switch and relay into a single package, reducing the space required for total control of fans and pumps. The current switch and relay operate independently of one another. These devices allow start/stop control and status monitoring with one device instead of two.

• Combined relay and status – combines command relay and fan/pump status sensor in a single, easy-to-install unit
• Fan and pump status – detect belt loss and motor failure ideal for fan and pump status
• Polarity insensitive status outputs – fast and easy installation
• Two outputs – H948 feature a SPDT command relay control two outputs with a single relay
• Added flexibility – bracket on H948 can be installed in three different configurations
• Easy setup – relay and status LEDs
• Induced from monitored conductor sensor power

The post Veris Hawkeye H948 – Current Switch appeared first on Electro-Meters.

The Hawkeye relay combination series combines an on/off status sensor and command relay in one package, saving the labor, wire runs and space required to mount a separate relay. The switch and relay (not electrically connected) are in the same housing, saving space and cost. It is ideal for monitoring and controlling motors where belt loss is not a concern.

• On/off status and command relay in a single labor and space saving device
• Detect belt loss – cost-effectively monitor start/stop, unit vents, fan coils, exhaust fans, and other loads where belt loss is not a concern
• Easy setup – no calibration required easy setup and operation
• SPDT command relay
• No tubing necessary – easier to install than differential pressure switches
• Induced from monitored conductor sensor power

The post Veris Hawkeye H940 – Current Switch appeared first on Electro-Meters.

Hawkeye Relay Combination series high voltage output current switches are the ideal solution for the automation installer. These units combine a current switch and relay into a single package, reducing the space required for total control of fans and pumps. The integrated current switch and relay operate independently of one another. These products perform the functions of start/stop and status monitoring with one device instead of two.

• Combines command relay and fan/pump status sensor in a single, easy-to-install unit
• Polarity insensitive status outputs – fast and easy installation
• Easy setup – relay and status LEDs
• No tubing – easier to install than differential pressure switches
• Detect belt loss and motor failure – ideal for fan and pump status
• Added flexibility – bracket on H939 can be installed in three different configurations

The post Veris Hawkeye H939 – Current Switch appeared first on Electro-Meters.

The Hawkeye relay combination series is the ideal solution for the automation installer. These units combine a current switch and relay into a single package, reducing the space required for total control of fans and pumps. The current switch and relay operate independently of one another. These devices allow start/stop control and status monitoring with one device instead of two.

• Combined relay and status – combines command relay and fan/pump status sensor in a single, easy-to-install unit
• Fan and pump status – detect belt loss and motor failure ideal for fan and pump status
• Polarity insensitive status outputs – fast and easy installation
• Two outputs – H948 feature a SPDT command relay control two outputs with a single relay
• Added flexibility – bracket on H938 can be installed in three different configurations
• Easy setup – relay and status LEDs
• Induced from monitored conductor sensor power

The post Veris Hawkeye H938 – Current Switch appeared first on Electro-Meters.

Hawkeye 934 current monitoring devices provide unique solutions for accurately monitoring status of motors controlled by variable frequency drives. The microprocessor based H934 store the sensed amperage values for normal operation at various frequency ranges in non-volatile memory. This information allows the device to distinguish between a reduced amp draw due to normal changes in the frequency and an abnormal amp drop due to belt loss or other mechanical failures. The relay on the H934 is isolated from the current switch, and all relay connections are externally accessible on the device.

• Automatically compensates for the effects of frequency and amperage changes in monitored conductor associated with VFDs
• Nuisance reduction – provides a secondary setpoint option of 50% of the originally measured current
• Rapid troubleshooting – LED indicates normal and alarm conditions
• Induced from monitored conductor sensor power
• LED status, LED relay power

The post Veris Hawkeye H934 – Current Switch appeared first on Electro-Meters.

The Hawkeye relay combination series combines an on/off status sensor and command relay in one package, saving the labor, wire runs and space required to mount a separate relay. The switch and relay (not electrically connected) are in the same housing, saving space and cost. It is ideal for monitoring and controlling motors where belt loss is not a concern.

• On/off status and command relay in a single labor and space saving device
• Detect belt loss – cost-effectively monitor start/stop, unit vents, fan coils, exhaust fans, and other loads where belt loss is not a concern
• Easy setup – no calibration required easy setup and operation
• No tubing necessary – easier to install than differential pressure switches
• Induced from monitored conductor sensor power

The post Veris Hawkeye H930 – Current Switch appeared first on Electro-Meters.