Showing 31–58 of 58 results

ITECH IT6100 Series – Programmable DC Power Supplies

IT6100 series assure you accurate measurements with 0.1mV/0.1mA high resolution and high accuracy. With high-speed List mode output and voltage rise speed up to 20ms, it can independently edit and perform the default voltage waveform to meet the high-speed test needs. IT6100 series has built-in 5 1/2 digital voltmeter and milliohm meter, which can measure additional signals. IT6100 series supports SCPI communication protocol, GPIB/USB/RS232 interfaces are optional for customers.

ITECH IT6300 Series – Triple Output DC Power Supplies

IT6300 series is high-performance programmable triple channel DC power supply, each output voltage and current can be set from 0 to maximum rated output. This series provides series connection, parallel connection and synchronous functions of channels which offer multi-purpose solutions for customers test. IT6300 series is with high resolution 1mV / 1mA and remote sense function, which make the test more accurate. With built-in standard USB / RS232 / GPIB communication interface, IT6300 series greatly enhance the communication speed, and customers also can adjust the digital step value by using the cursor to to facilitate the operation.

Buy Online

ITECH IT6700 Series – Economical DC Power Supplies

IT6700 series economical power supplies have the widest voltage and current utilizations. One power supply can replace multiple other power supplies and be widely used in various testing situations. With a capacity of 100W, voltage output of 60V, current output of 5A, they can control voltage and current change rates automatically. The power ratio can be up to 3 times. For instance, one IT6720 with up to 60 V and 5 A can substitute several previous models, allowing cost savings over the cost of multiple units.

Buy Online

ITECH IT6700H Series – High Voltage DC Power Supplies

IT6700H series high-voltage DC power supplies has a maximum output power of 3000W, adjustable voltage 0-1200V and current 0-10A. IT6700H series provide list mode, built-in RS232 / USB / GPIB communication interface, rich SCPI instructions to facilitate the setup of automated test platforms. IT6700H can accurately follow the battery charge and discharge process, widely used in battery fluctuation simulation test, battery charger, high voltage ultra high speed diode, electrolytic capacitor, electromechanical control field and ATE test system which need to use high voltage and low current DC power supply.

ITECH IT6800 Series – Programmable DC Power Supplies

IT6800 series programmable power supplies (18V-150V / 72W-216W) are small in size but have high power output, and 10mV, 10mA resolution, supports RS232 / GPIB / USB communication interface.

Buy Online

ITECH IT6900 Series – Wide-Range Programmable DC Power Supplies

IT6900A series wide range programmable power supply have built-in standard RS232, USB, GPIB, RS485 and analog interface, support SCPI protocol, facilitate remote control, industrial PLC control and the formation of intelligent test platform. Remote compensation terminals avoid the problem of inaccurate testing caused by voltage drop on the wire. Low ripple, low noise and built-in digital voltmeter make IT6900A easy to do external measurement. IT6900A can be widely applied in DC-DC power supply module, battery charging and sensors and other test areas.

Buy Online

APM SP 1U Series – Programmable DC Power Supply

APM’s SP Series 1U programmable DC power supplies have many features including: high precision and resolution, 0.05 % voltage accuracy, 0.1 % current accuracy, 0.1 mV voltage resolution, 0.2 mA current resolution, high efficiency, low ripple and noise, and multiple communication interfaces, which allows for a more flexible and easy-to-use power supply.

  • Power: 600-1600 W
  • Voltage: 20-200 V
  • Current: 7.5-60 A

APM SP 2U Series – Programmable DC Power Supply

APM’s SP Series 2U programmable DC power supplies have many features including: high precision and resolution, 0.05 % voltage accuracy, 0.1 % current accuracy, 0.1 mV voltage resolution, 0.2 mA current resolution, high efficiency, low ripple and noise, and multiple communication interfaces, which allows for a more flexible and easy-to-use power supply.

  • Power: 1000-4000 W
  • Voltage: 32-800 V
  • Current: 7.5-200 A

APM Momentum S Series – Wide Range Programmable DC Power Supply

The Momentum S series is a programmable DC power supply that offers a single output and the option for single-phase or three-phase input. It supports universal input voltage, providing flexibility for various power requirements. The power supply features a high power density structure design, allowing it to deliver 10kW output power in a compact 2U model. For higher power needs, it can be utilized through optical fiber parallel connection.

One of its notable features is the wide-range output design, which expands the range of current and voltage combinations at full power output, enhancing its versatility. With a sleek and high-end appearance, the power supply incorporates a user-friendly UI touch interface. It also includes unique built-in test functions, making it suitable for a range of applications such as system integration testing, battery charging and simulation, automotive electronic testing, and solar panel simulation.

  • Power: 3400-10000 W
  • Voltage: 80-500 V
  • Current: 27-390 A

APM SP 3U Series – Programmable DC Power Supply

APM’s high power, programmable DC power supply series adopts high frequency isolation and active PFC design, which allows the unit to achieve high efficiency at any output point. An optional built-in electronic load feature enables the unit to function as a two-quadrant power supply. Integrated smart 3-stage charging algorithm simulation is suitable for the most common types of batteries on the market. Users can select standard automotive power network voltage curves to do the DUT performance test directly, according to the demand. List and Step modes can be used for auto sequence output.

  • Power: 6000-18000 W
  • Voltage: 80-2250 V
  • Current: 21-600 A

APM SP 6U Series – Programmable DC Power Supply

APM’s high power, programmable DC power supply series adopts high frequency isolation and active PFC design, which allows the unit to achieve high efficiency at any output point. An optional built-in electronic load feature enables the unit to function as a two-quadrant power supply. Integrated smart 3-stage charging algorithm simulation is suitable for the most common types of batteries on the market. Users can select standard automotive power network voltage curves to do the DUT performance test directly, according to the demand. List and Step modes can be used for auto sequence output.

  • Power: 24000-36000 W
  • Voltage: 80-1500 V
  • Current: 42-1200 A

Rigol DP700 Series – Entry Level Linear DC Power Supplies

  • 1 Channel
  • 150 W models in 50 V / 3 A or 30 V / 5 A configurations
  • Low ripple and noise: <500 μVrms/3 mVpp; <2 mArms

Buy Online

Preen ADC Series – DC Power Supplies

  • O/P Power: 2-64kW
  • O/P Voltage: 0-600V, max output voltage is 30V-600V
  • High power density: 2kW and 4kW models are 2U, and 8kW model is only 4U
  • Three 19-inch cabinet available (18U、32U、42U)

Preen ADG Series – DC Power Supplies

  • Wide output voltage range: with maximum voltage up to 2000V, ideal for renewable energy, smart grid, and Electric Vehicle (EV) related applications
  • High Efficiency and Power Factor: up to 90% efficiency and power factor
  • High Output Power: up to 100 kW in one chassis with high power density
  • Fast Transient Response Time: <4~12ms

Preen ADS Series – DC Power Supplies

  • Output voltage of 28V ± 10% or 270V ± 10% for aerospace or military usage
  • Output current ranges from 50A to 1500A with maximum overload to 4500A
  • Capable of sustaining abusive loads with inrush current and reverse current, such as from aircraft engines or generators

Preen AFC Series – AC Power Source / Frequency Converter

  • Single phase power output from 0.5-150kVA and three-phase power output from 5-2000kVA
  • CE & RoHS certification, with excellent performance in safety and electromagnetic compatibility
  • High input power factory and high efficiency up to 92%
  • Coupled with 4 LED displays to show measurements of voltage, current, frequency and power at once

Preen PFV Series – AC Power Sources

  • Regenerative function can sink the energy from load and return to the grid
  • Three-phase independent control to set voltage of each phase
  • Phase angle control to set angle between each phase

Preen PWF Series – AC Power Sources

  • Wide range output frequency up to 800Hz for aerospace and military applications
  • Three-phase independent control to set voltage of each phase.
  • Phase angle control to set angle between each phase.

DEIF Power Supply

Power supplies are high quality, compact and have a reliable switch mode. Available for single-phase or three-phase in a wide range of models. All models are designed for easy click mounting on DIN rail and give full power in a wide ambient temperature range.

Superior Electric WHR – STABILINE Automatic Voltage Regulator

Superior Electric offers an extensive line of voltage regulators as part of their WHR Series. WHR Series STABILINE® Automatic Voltage Regulators maintain constant voltage to your equipment, even when the input voltage and system load vary widely.

Yokogawa 2553A – Precision DC Calibrator

  • Intuitive operation: Dials and switches are provided for each digit and function, and traditional 7-segment LEDs provide clear visibility
  • High resolution: 5.5 digits ±120000 count output resolution
  • DC Voltage: ±10 mV to ±30 V
  • DC Current: ±1 mA to ±100 mA
  • Voltage accuracy: +/- 75 ppm
  • Current accuracy: +/- 120 ppm
  • Temperature calibration: 10 types of thermocouples including K, T, E, and J types
  • User-defined thermocouple and RTD (PT1000) calibration: Generates various types of thermocouple and RTD by extrapolating the relation between voltage and temperature

Yokogawa LS3300 – AC Power Calibrator

  • High Accuracy:
    • AC Voltage: ±350 ppm
    • AC Current: ±450 ppm
    • AC Power: ±450 ppm
  • Phase Accuracy: ±0.03˚ at 50/60 Hz
  • High Stability:
    • AC voltage: ±50 ppm/h
    • AC current: ±50 ppm/h
    • AC power: ±100 ppm/h
  • Wide Generation Range:
    • AC voltage: 10 mV to 1250 V
    • AC current: 0.3 mA to 62.5 A
    • Frequency: 40 to 1200 Hz

Yokogawa 2558A – Precision AC Standard

  • Intuitive operation: Dials and switches are provided for each digit and function, and traditional 7-segment LEDs provide clear visibility
  • 6 voltage ranges (100 m/1/10/100/300/1000 V)
  • 4 current ranges (100 m/1/10/50 A)
  • Sweep (Voltage/Current/Frequency)
  • Output Divider: Linearity tests can be simply performed by dividing the output into steps. For example, a setting of 4 will generate steps of 25, 50, 75 and 100% of the set output value.
  • % Deviation readout
  • Common current output terminals: The same output terminals are used for all current ranges. Test times are therefore reduced by avoiding the need to change the wiring for meters which have different ranges.
  • Wide frequency range-: 40 to 1000 Hz (Frequency accuracy : ±50 ppm)

Yokogawa 2560A – Precision DC Calibrator

  • Intuitive operation: Dials and switches are provided for each digit and function, and traditional 7-segment LEDs provide clear visibility
  • High resolution: 5.5 digits ±120000 count output resolution
  • Accuracy:
    • DC voltage: ±50 ppm
    • DC current: ±70 ppm
  • Resolution:
    • 5.5 digits, ±120000 count display
    • 6.5 digits, ±1200000 count display – high res.
  • Direct readout of the deviation
  • Digital display of output
  • Output Divider
  • Sweep: With a flick of a switch, the output can be swept within the source range with sweep times of 8, 16, 32 or 64 seconds.
  • High stability
    • DC voltage: ±10 ppm/h
    • DC current: ±20 ppm/h

Yokogawa GS200 – DC Voltage / Current Source

  • Source and sink operation up to 110 V/3.2 A (four-quadrant operation)
  • Basic accuracy: ±0.02% (DC voltage generation)
  • Sweep output at up to 100μs intervals
  • Comes with abundant sweep patterns (linear, logarithmic, and arbitrary)
  • Stores up to 65535 points of source measure data in the internal memory
  • Easy file operation with the USB storage function
  • Remote control and FTP using Web server function (Optional)

Yokogawa GS610 – Source Measure Unit

  • Source and sink operation up to 110 V/3.2 A (four-quadrant operation)
  • Basic accuracy: ±0.02% (DC voltage generation)
  • Sweep output at up to 100μs intervals
  • Comes with abundant sweep patterns (linear, logarithmic, and arbitrary)
  • Stores up to 65535 points of source measure data in the internal memory
  • Easy file operation with the USB storage function
  • Remote control and FTP using Web server function (Optional)

Yokogawa GS820 – Multi Channel Source Measure Unit

  • Isolated 2-channel source and measurement function
  • Source and measurement ranges
    18 V model: 7 V and 3.2 A or 18 V and 1.2 A
    50 V model: 20 V and 1.2 A or 50 V and 0.6 A
  • 1pA resolution at extremely small current range 200 nA
  • Generate arbitrary waveforms consisting of up to
    100000 points at 100 µs intervals
  • Channel expansion through master-slave
    synchronization link
  • Fast test speeds

ITECH IT-E165A – Anti-Reverse Protection Units

IT-E165A is an optional anti-reverse module suitable for IT6000 series products (including IT6000B, IT6000C, IT6000D, IT8000).

  • Voltage: 750-900 V
  • Current: 250-400 A

Buy Online