Power Supplies
Rigol DP800 Series – High Performance Linear DC Power Supplies
- 140 to 200 Watt
- 1 to 3 channel models available
- Low Ripple Noise <350 uVrms/2mVpp
Rigol DP900 Series – High Performance Linear DC Power Supplies
- Total Power: 210 Watts
- 3 channels
- Max Voltage: 64 Volts
- Max Current: 6 Amps
Neureus Technologies RPSu High Precision Power Supply
The RPSu High Precision Power Supplies can deliver high current output up to 300A of maximum current and 60V of maximum voltage at 12Kw of maximum power with a long term stability of 2ppm. The RPSu is best suited for scientific and industrial applications such as particle accelerator magnets supply, medical imaging and treatment systems, and semiconductor processing.
ITECH IT7600 Series – High Performance Programmable AC Power Supplies
ITECH’s IT7600 series high performance programmable AC power supplies, adopt advanced digital signal processing technology, with frequency up to 10-5000 Hz, built-in power meter and large-screen oscilloscope function. Power up to 54 kVA and support master-slave parallel, which can provide high-capacity single-phase or three-phase AC output. The IT7600 has built-in arbitrary waveform generator to simulate a variety of waveforms; as well as strong measurement and analysis functions.
Preen AFV/APF Series – AC Power Sources
- Single phase output power from 0.5-20kVA and three phase output power from 10-2000kVA.
- CE mark with high electromagnetic compatibility performance.
- Programming Sequence Function: STEP and GRADUAL modes allow users to easily set sequences of start/ end voltage, frequency and run time for testing purposes.
ITECH IT7900 Series – Regenerative Grid Simulator
The IT7900 series is a programmable, four-quadrant grid simulator. It is also a four-quadrant power amplifier, which can be used to test various grid-connected equipment. For example, PCS, energy storage system, microgrid, BOBC (V2X), PHiL, etc. With the islanding mode (RLC settable), a single unit of IT7900 can realize the anti-islanding protection test. The power density of IT7900 series is very high, 15kVA in 3U. After parallel connection, the power can be extended up to 960kVA.
ITECH IT7900P Series – High Performance Regenerative Grid Simulator
The IT7900P series high-performance regenerative grid simulator provides an all-in-one test solution that can be used not only as a grid simulator and four-quadrant power amplifier, but also as a four-quadrant regenerative AC/DC electronic load. The full four-quadrant operation, regenerative ability can feedback power to the grid, meet the needs of environmental protection, but also saves a lot of electricity and heat dissipation costs. Compact, modular and efficient structure design allows the IT7900P up to 15kVA in 3U single unit, and its power can be extended to 960kVA after master-slave parallel connection. Colorful touch screen with intuitive GUI allows IT7900P to directly define different waveforms. The rich operation modes can meet the test requirement of single-phase, three-phase, inverse-phase and multi-channel. It provides high flexibility for testing and can be widely used in many fields such as PV, ESS and EV.
ITECH IT-M7700 Series – High Performance Programmable AC Power Supplies
ITECH IT-M7700 High Performance Programmable AC Power Supply combines intelligence and flexibility, breaks through the huge defects of the traditional AC power source, reduces the size to only 1⁄2 1U, maximizes space utilization. Built-in power meter and arbitrary waveform generator make it convenient to simulate various arbitrary waveform outputs. IT-M7700 is designed with advanced technologies of programmable AC and DC power supplies, and can be widely used in multiple fields such as power energy products, home appliances, industrial electronics, and IEC standards testing.
ITECH IT6500 Series – Wide-Range High-Power DC Power Supplies
With ITECH’s latest technology, the IT6500 series offers a full-featured high-performance power test solution. With fast response these DC power supplies provide users with a new level of power supply performance. From 800W to 30 kW, the whole series include more than 100 models. The maximum output voltage and current is up to 1000V and 1200A respectively. With its autoranging capability, it also has a super wide range of voltage and current applications. Users can choose the power supply that fits their testing requirements perfectly. IT6500C series power supplies provide built-in DIN40839 and ISO-16750-2 testing curves, support solar panel I-V curve simulation function.
APM SP-300 Series – Single Phase AC Power Supply
APM’s SP-300 Series AC Source is a single phase, multifunctional power supply able to output DC, AC and DC+AC, as well as measure electrical parameters precisely. The touch screen allows for complete, easy operation from the front of the unit, and USB data import/export. It is able to analog output normal or abnormal power input for electrical device testing. The SP Series features high speed DSP+CPLD control, high frequency PWM technology, active PFC design, and up to an 85% conversion efficiency.
- Power: 600-5000 W
- Voltage: 150-300 V
- Current: 2.8-46 A
APM SPS-300 Series – Three Phase AC Power Supply
APM’s SPS-300 Series AC Source is a 3-phase programmable AC power supply with high power density. Featuring high speed DSP+CPLD control, high frequency PWM technology, and active PFC design, the SPS-300 series is able to provide stable DC/AC output power, as well as 3-phase/1-phase output power. The touch screen allows for complete, easy operation from the front of the unit. The SPS-300 Series is applicable in multiple testing applications including electrical, lighting, and aviation.
- Power: 1200-20000 W
- Voltage: 300 V
- Current: 5.04-165.6 A
ITECH IT6400 Series – Bipolar DC Power Supplies and Battery Simulator
The unique bipolar voltage/current output makes the IT6400 series a bipolar power source or a bipolar electronic load. The battery simulating function is especially applicable for development and high speed production testing of portable, battery-operated products. IT6400 has an ultrafast transient time, less than 20 μs and resolution up to 1 nA. Its new designed speed shift mode achieves voltage/current fast rising and without overshoot, the rising time up to 150μs. Meanwhile, the waveform display function let the test be visible and simple. IT6400 series can be widely used in portable battery-operated products test, mobile power pack test, LED test and other fields.
ITECH IT7300 Series – Programmable AC Power Supplies
In order to meet the bigger range of AC power supply and more complex change characteristics, engineers need more powerful and stable AC power supply to simulate the actual working environment. IT7300 series is the best solution in this area. IT7300 series can be widely applied in the electronics and electrical industry, lighting, specification verification of RD, the use of laboratory testing and factory production online test etc.
ITECH IT-M3100 Series – Ultra-Compact Wide-Range DC Power Supplies
IT-M3100 series breaks through the traditional tech limits, in the ultra compact size of only 1U Half-Rack, the unit can not only output high power, but also has high performance and versatility. It supports the master-slave parallel mode. The full range of models support multiple stacking and parallel connection by handily designing “leg” plug-in. Fit with rack mount kit to achieve the perfect use.
ITECH IT-M3100D Series – Ultra-Compact Dual-channel Programmable DC Power Supplies
IT-M3100D dual-channel programmable DC power supply, only 1U half rack, provides fully isolated dual-channel output. The automatic wide-range design can provide you with higher voltage and current output, so one unit can cover a wide range of applications. Its flexible modular design, independent multi-channel design and simultaneous operation function allow you to configure each channel freely. IT-3100D dual-channel programmable DC power supply is especially suitable for production line aging test and building automated test system. At the same time, it can also be widely used in experiments and evaluation, quality management and so on.
ITECH IT6000D Series – High Power Programmable DC Power Supplies
IT6000D Series has wide range of applications and a single unit provides power range of 5kW to 144kW, current up to 2040A, as well as voltage up to 2250V. IT6000D also provides multi built-in communication interfaces to simplify and accelerate the testing development. The compact 3U design saves rack space. Multi units of the same model can be paralleled easily to have higher power and the maximum power can reach up to 1.152 MW.
ITECH IT6100 Series – Programmable DC Power Supplies
IT6100 series assure you accurate measurements with 0.1mV/0.1mA high resolution and high accuracy. With high-speed List mode output and voltage rise speed up to 20ms, it can independently edit and perform the default voltage waveform to meet the high-speed test needs. IT6100 series has built-in 5 1/2 digital voltmeter and milliohm meter, which can measure additional signals. IT6100 series supports SCPI communication protocol, GPIB/USB/RS232 interfaces are optional for customers.
ITECH IT6300 Series – Triple Output DC Power Supplies
IT6300 series is high-performance programmable triple channel DC power supply, each output voltage and current can be set from 0 to maximum rated output. This series provides series connection, parallel connection and synchronous functions of channels which offer multi-purpose solutions for customers test. IT6300 series is with high resolution 1mV / 1mA and remote sense function, which make the test more accurate. With built-in standard USB / RS232 / GPIB communication interface, IT6300 series greatly enhance the communication speed, and customers also can adjust the digital step value by using the cursor to to facilitate the operation.
ITECH IT6700 Series – Economical DC Power Supplies
IT6700 series economical power supplies have the widest voltage and current utilizations. One power supply can replace multiple other power supplies and be widely used in various testing situations. With a capacity of 100W, voltage output of 60V, current output of 5A, they can control voltage and current change rates automatically. The power ratio can be up to 3 times. For instance, one IT6720 with up to 60 V and 5 A can substitute several previous models, allowing cost savings over the cost of multiple units.
ITECH IT6700H Series – High Voltage DC Power Supplies
IT6700H series high-voltage DC power supplies has a maximum output power of 3000W, adjustable voltage 0-1200V and current 0-10A. IT6700H series provide list mode, built-in RS232 / USB / GPIB communication interface, rich SCPI instructions to facilitate the setup of automated test platforms. IT6700H can accurately follow the battery charge and discharge process, widely used in battery fluctuation simulation test, battery charger, high voltage ultra high speed diode, electrolytic capacitor, electromechanical control field and ATE test system which need to use high voltage and low current DC power supply.
