As the demand for efficient power generation and conversion rises, renewable energy sources like solar and wind are increasingly adopted. Alongside this shift, advances in electric vehicles and energy-efficient technologies make accurate measurements essential to capture even minor energy losses. Whether evaluating multiphase inputs in motor and drive design or meeting strict efficiency standards for photovoltaic inverters, the WT1800R high-performance power analyzer provides engineers with a precise and reliable tool for measuring power, quality, and efficiency.

6 Inputs with High-Resolution Display

Capture simultaneous measurements on up to six inputs at 2 MS/s (16-bit resolution). The WT1800R features an 8.4-inch XGA display that enables split-screen viewing of up to six waveforms, with the capacity to show up to 12 pages of diverse measurement parameters. This setup is ideal for efficiency testing of inverter-driven motors, renewable energy systems, and traction applications such as pumps, fans, and hybrid/electric vehicles. The unit can also display measurements in vector format or trend them over time.

Guaranteed Accuracy Across a Wide Range

The WT1800R ensures accuracy across various voltage, current, and frequency conditions. Basic power (AC) measurement accuracy is maintained between 1% to 110% of the selected voltage and current range, covering voltages from 15 mV to 1100 Vrms and currents from 0.1 mA to 5.5 Arms (5 A input) or 10 mA to 55 Arms (50 A input). The unit’s design minimizes low power factor error, enhancing accuracy during large phase shifts and at high frequencies (±0.07% of apparent power).

Versatile Input Elements

Both 5 A and 50 A input elements can be installed in a single WT1800R unit, allowing engineers to switch seamlessly between different applications, such as standby power measurements and assessing various operating modes of the device under test.

Flexible Data Update Intervals

Choose between 9 data update intervals ranging from 50 ms to 20 s, or enable automatic adjustment based on fluctuating input frequencies—ideal for measurements on motors where frequency varies with RPM. During low-speed operation (input frequency ≤ 20 Hz), updates occur each cycle, which supports monitoring results per motor revolution.

Advanced Harmonic Analysis

Analyze harmonics up to the 500th order for a 50/60 Hz fundamental with a data update interval as fast as 50 ms. The WT1800R includes two harmonic analysis options:

• /G5 Option: Analyzes harmonic components, total harmonic distortion (THD), and fundamental wave.
• /G6 Dual Harmonic Option: Measures harmonics on two sources side-by-side, such as input/output for inverters, motors, lighting ballasts, and UPS.

Comprehensive Motor Evaluation

Beyond electrical parameters, the motor evaluation function captures speed, direction, torque, mechanical power, synchronous speed, slip, electrical angle, motor efficiency, and total system efficiency, using analog or pulse outputs from rotation and torque sensors.

Support for Field-Oriented Control

For permanent magnet synchronous motors (PMSM), commonly controlled with dq-axis parameters, the WT1800R’s enhanced calculation functions compute Ld and Lq, supporting field-oriented control measurements.

DC Power Supply for Current Sensors (/PD2 Option)

Equip the WT1800R with a DC power supply for CT series AC/DC current sensors to measure large currents, enhancing the signal-to-noise ratio and noise immunity.

High-Speed Data Capture

The high-speed data capture function records Sigma-Urms, Sigma-Irms, and Sigma-P from DC and three-phase devices every 5 ms without synchronization, or every 1–100 ms with external synchronization, depending on the clock signal frequency.

Customizable Display and Internal Storage

Customizable screens provide easy parameter confirmation and can be quickly accessed from 1 GB of internal memory, where numerical and other data are also stored.

Correlate Power Consumption and Inverter Waveforms

For motor endurance tests, Yokogawa’s IS8000 software platform synchronizes power data from the WT1800R with waveform data from the DL950 data logger or DLM5000 oscilloscope, enabling efficient on-screen analysis and correlation between power consumption and inverter waveforms.

Learn More

The post Yokogawa WT1800R – High Performance Power Analyzer appeared first on Electro-Meters.

The post Accuenergy AcuRev 2100 Series – Revenue Approved Multi-Circuit Submeter appeared first on Electro-Meters.

This PQM-SCADA enterprise is an easy-to-use software solution which allows the user to visualize live-data, historical
data or reports. The multi-screen capability gives the user the ability to design their own visualization screens including
the use of multiple monitors. User-management with different access and security levels is integrated, including the option for your customers to view limited data.

Features

• Real Time & Historical Data
• Multiple Visualizations
• Automatic Report Generation (EN50160)
• Notifications, Alarm, Email, SMS
• Remote Meter Configuration
• User Management tool

The post NEO Messtechnik PQM SCADA – Power Quality Management Software appeared first on Electro-Meters.

• Accuracy: 0.05%
• Sampling Rate: 124kS/s
• Resolution: 24bit
• Safety Category: CAT IV 600V
• Modular System up to 40 ch
• Desktop or Rack Mount

The post NEO Messtechnik PQM 200 – Power Quality Monitor appeared first on Electro-Meters.

Features

• Accuracy: 0.1%
• Sampling Rate: 16kS/s or 32kS/s
• Resolution: 24bit
• Safety Category: CAT IV 300V
• Modular System up to 64 ch

The post NEO Messtechnik PQM 100 – Power Quality Monitor appeared first on Electro-Meters.

• 11 inch full-HD Smart Touch display
• Up to 4 hours of operation.
• Sensor Supply for current clamps and sensors (uni- and bipolar)
• GPS for highly-precise time synchronization
• Large SSD, up to 1 TB data storage
• Interfaces: USB 3.0, TCP/IP, LAN, Wifi, Bluetooth, RS232, Modbus, 104, DIO, and CAN.

Features

• Supraharmonics up to 500 kHz
• High Accuracy: 0.05%
• High Sampling Rate: 124kS/s or 1MS/s
• High Resolution: 18bit / 24bit
• High Safety: CAT IV 600V
• Power Quality: Class A
• High Dynamic: 0.5mA to 150kA
• High Performance: PC with Multi-Touch and battery pack
• High Connectivity: additional input signals, Interfaces, AC&DC power, etc.
• Visualizations: Recorder, Waveform, FFT, Vector, Table, etc.
• System Dynamics: Resonances, Phase Angle Jumps, etc.
• Transient Recording: Waveform & Disturbance Trigger
• Disturbance: 1/2 Period storing & triggering
• Phasor Measurement Unit(PMU) and RoCoF
• Standards and Certifications: IEC61010-1 (2011) / IEC61010-2-030 / IEC 61000-4-3 / IEC 61000-4-4 / LVD Directive 2014 / EMC Directive 2014/ Rohs Directive 2015/ EN 61000-3-2 / EN 61000-3-3 / EN 61326-1 / EN 55011 +A1, Class A

The post NEO Messtechnik PQA 8000 – Mobile Power Quality Analyzer appeared first on Electro-Meters.

• 7 inch multi-touch display – or completely without display
• Up to 6 hours of operation
• Sensor Supply for current clamps and sensors (uni- and bipolar)
• GPS for highly-precise time synchronization
• Up to 256GB data storage
• Interfaces: USB 3.0, TCP/IP, LAN, Wifi, Bluetooth, RS232, Modbus, 104, DIO, and CAN.

Features

• High Accuracy: 0.05%
• High Sampling Rate: 48kS/s
• High Resolution: 24bit
• Voltage Range: 1600V / 800V
• High Safety: CAT IV 600V
• Power Quality: Class A
• Bandwidth: 20 kHz
• High Dynamic: 0.5mA to 150kA
• High Performance: PC with Multi-Touch and battery pack
• High Connectivity: additional input signals, Interfaces, AC&DC power, etc.
• Visualizations: Recorder, Waveform, FFT, Vector, Table, etc.
• System Dynamics: Resonances, Phase Angle Jumps, etc.
• Transient Recording: Waveform & Disturbance Trigger
• Disturbance: 1/2 Period storing & triggering
• Phasor Measurement Unit(PMU) and RoCoF
• Standard and Certifications: IEC61010-1 (2011) / IEC61010-2-030 / IEC 61000-4-3 / IEC 61000-4-4 / LVD Directive 2014 / EMC Directive 2014/ Rohs Directive 2015/ EN 61000-3-2 / EN 61000-3-3 / EN 61326-1 / EN 55011 +A1, Class A

The post NEO Messtechnik PQA 7000 – Mobile Power Quality Analyzer appeared first on Electro-Meters.

Applications

• Power measuring and power quality examination
• Power line measuring examination

Learn More

The post Yokogawa CW500 – Power Quality Analyzer appeared first on Electro-Meters.

The WT300E provides extremely low current measurement capability down to 50 micro-Amps, and a maximum of up to 26 Amps RMS. This instrument is ideal for engineers performing stand-by-power measurements, Energy Star®, SPECpower and IEC62301 / EN50564 testing, battery charger and other low-level power measurements.

The WT300E series is the enhanced version of Yokogawa’s 5th generation of compact power meters. The world’s best-selling power meter is the instrument of choice for a wide range of applications in production testing, quality assurance and Research & Development.

WT300E power meters are easy to use, cost effective and accurate for diverse applications such as the testing of electric devices, the development and evaluation of home appliances and induction cookers, battery and DC driven device testing, and conformance tests on uninterruptable power supplies.

Learn More

The post Yokogawa WT300E – Compact Power Analyzer appeared first on Electro-Meters.

The WT500 is a sophisticated power Analyzer with fast acquisition rate ideal for analyzing harmonics to the 100th order and transients. The WT500 can display inputs as waveforms, trends and in vector or bargraph format. Versatile integration functions such as active power (WP), current (q), reactive power (WQ), and apparent power (WS), and measurement of bought and sold watt hour. The WT500 can display, analyze and evaluate your power, making it an indispensable tool for Green IT, Energy Star and CO2 reduction.

The WT500 is designed for small current measurement in energy-saving equipment, as well as evaluating currents for large-sized loads. The WT500 works with voltages ranging from 1.5 V up to 1000 V, supporting a wide range of applications. Because it can accept signal inputs for up to six phases, a signal WT500 unit can measure I/O signals on inverters.

Learn More

The post Yokogawa WT500 – Mid-Range Power Analyzer appeared first on Electro-Meters.