Showing 81–100 of 108 results

Texmate GI-50EB101 & GI-50TB101 Tiger Series – Programmable Meter Controllers

  • 144x72mm
  • 5 Digit Controllers
  • 101 segment bargraph
  • Red, green, or superbright red 7-segment, 0.56” high LEDs with full support for seven segment alphanumeric text.
  • Range: -19999 to 99999
  • Modular construction
  • Front panel controls
  • Up to 4 “smart” input channels

Texmate MU Series – Miniature DC Volt Meter

  • 48x24mm
  • 3 1/2 digit, 0.315″ LED display
  • Quick, easy mounting into any panel thickness
  • Direct flush mount into mosaic panels
  • DC Volts Measuring
  • AC/DC Powered LED Meter

Texmate PL-B101D40 Leopard Series – Bargraph Meters

  • 144×24 mm
  • 101 segments
  • 4 Digit Display
  • Range: -1999 to 9999
  • The bargraph can display, full scale, any desired portion of the digital reading.
  • Bargraph center zero function.
  • Four programmable setpoints with adjustable Hysteresis.
  • Setpoint 1 has delay-on-make and delay-on-break plus a special “pump on pump off” mode that creates a Software Features Hysteresis Band between SP1 and SP2.
  • Relay activation can be selected to occur above (hi) or below (Lo) each setpoint.
  • Digital display blanking.
  • Decimal point setting.
  • Four-level brightness control accessed by the button and adjusted by the button.

Texmate AM-20 Series – Bargraph Meters

  • 69.75 x 29.7mm
  • 20 Segments
  • 0.15” LED Segments in a Slim Bezel Case
  • Multiple user-programmable display modes
  • Dual scaling and powered from 4V to 6VDC Bargraph mode 4V to 24VDC in Dot mode
  • 20 MΩ input impedance

Texmate AM-30 Series – Bargraph Meters

  • 96x24mm
  • 31 Segments
  • 7-header selectable DC ranges plus 4 – 20 mA
  • 5VDC powered with red, green, or amber LED bargraph
  • Horizontal or vertical format
  • Optional Single or Dual Setpoints

Texmate RP Series – Digital Panel Meters

  • 96x48mm
  • 3 1/2 and 4 1/2 Digit, 0.56” high Red LEDs
  • Optional High efficiency green or High bright red LEDs
  • Ideal for OEM applications
  • Accurate and Economically priced
  • Optional BCD output
  • DC applications only
  • Quick, easy mounting into any panel thickness

Texmate SD Series – Ultra Short Loop Powered Meter

  • 96x48mm
  • 0.5″ LCD Display
  • Lockable front panel scaling and calibration
  • 4 to 20 mA signal can be scaled from almost any two input values to display any required engineering unit of measure
  • 4-20 mA input can display 50,000 or 60,000 counts.

Texmate SM Series – Slim Bezel Multirange Meters

  • 69.75 x 29.7mm
  • LCD or LED display
  • 3 1/2 Digits, 0.56″ display
  • Slim Bezel Case
  • 2V, 20V & 200 VDC
  • 5 VDC Powered

Texmate SP Series – Slim Bezel Signal Powered DC Volt Meters

  • 69.9 x 29.6mm
  • LCD display
  • 3 1/2 Digits, 0.48″ display
  • Slim Bezel Case
  • DC Signal powered meter

Texmate TM Series – Slim Bezel Temperature Panel Meters

  • 69.75 x 29.7mm
  • LCD or LED display
  • 3 1/2 Digits, 0.56″ display
  • Slim Bezel Case
  • For J or K Thermocouples, in Celsius or Fahrenheit
  • 5 VDC Powered

Texmate UM Series – Digital Panel Meters

  • 96x48mm
  • 3 1/2 and 4 Digit, 0.56” high Red LEDs
  • Optional high efficiency green or High bright red LEDs
  • Ideal for OEM applications
  • Accurate and economically priced
  • Dedicated to a specific application
  • Quick, easy mounting into any panel thickness

Veeder-Root C628 Series – Totalizers

  • 0.71” high digit LED display (27% larger than other 1/8 DIN units)
  • Programmable color change display based on an event
  • Batch units – Independent display of background total
  • Programmable help function and secondary legend display
  • Dual preset units – Preset 1 programmable as absolute value or prewarn which tracks Preset 2
  • Choice of NPN or PNP primary input
  • Filter speed settable for 20, 200, or 10,000 Hz
  • Standard Outputs: 1 NPN transistor (2 NPN transistors on Dual & Batch units) & 1 relay (optional 2nd relay on Dual & Batch units)
  • Front panel reset enable and preset lockout
  • Optional RS-485 plug in card
  • CE approved, UL, CUL recognized

Yokogawa Tough Meter 270 Series – Analog Panel Meters

New Old Stock

No longer manufactured by Yokogawa

Yokogawa stopped manufacturing panel meters in 2017. Limited stock is available at Electro-Meters.
Our panel meter specialists can customize these meters to fit your applications.

  • 2.5″ to 3.5″ size
  • Pivot and Jewel or Taut Band models available
  • Accuracy: ±2% DC, ± 3% AC – rectifier type (60 Hz sine wave)
  • Tracking: ± 1 1/2% DC; ± 2% AC ; vertical mounting
  • Repeatability: ± 2% DC and AC rectifier type
  • Frequency Meters Available

Yokogawa Y Series – Elapsed Time Meters

  • Reset or non-reset models available
  • Window mount models available
  • Units meet ANSI spec C39.1
  • Units meet UL file #E44857 and CSA
  • 6 digit counters read in hours, tenths of hours, minutes and tenths of minutes
  • Weather resistant
  • 2-1/2″ and 3-1/2″ Big Look models
  • 2-1/2″ and 3-1/2″ round and square models
  • Conduit case models available
  • Proven design
  • Accuracy: Matches frequency control of power system
  • Input: 120, 208, 240, 480 VAC at 50 or 60 Hz
  • Optional 3 stud mounting is available on 31⁄2″
  • Complete interchangeability physically and electrically with most GE Types 235 and 236 models

Yokogawa 103 Series – Switchboard Elapsed Time Meters

New Old Stock

No longer manufactured by Yokogawa

Yokogawa stopped manufacturing panel meters in 2017. Limited stock is available at Electro-Meters.
Our panel meter specialists can customize these meters to fit your applications.

  • Units meet ANSI spec C39.1
  • Units meet UL file #E44857 and CSA
  • 6 digit counters read in hours, tenths of hours, minutes and tenths of minutes
  • Weather resistant
  • Reset or non-reset models available
  • Conduit case models available
  • Accuracy: Matches frequency control of power system
  • Input: 120, 208, 240, 480 VAC at 50 or 60 Hz

Yokogawa 123 Series – Dual-Vue Switchboard Meters

New Old Stock

No longer manufactured by Yokogawa

Yokogawa stopped manufacturing panel meters in 2017. Limited stock is available at Electro-Meters.
Our panel meter specialists can customize these meters to fit your applications.

  • 4.5″ size
  • Features analog and digital display to provide the ultimate in readability of power and control parameters.
  • A drop-in replacement for upgrade of existing control and switchgear panels.
  • Digital and Analog ( two in one ) Switchboard meter
  • Rugged switchboard style case and IP54 rated cover
  • Choice of high-intensity LED digital displays with high reliability analog movements

Yokogawa 185 Series – Edgewise Panel Meters

New Old Stock

No longer manufactured by Yokogawa

Yokogawa stopped manufacturing panel meters in 2017. Limited stock is available at Electro-Meters.
Our panel meter specialists can customize these meters to fit your applications.

  • 2.5″ size
  • Accuracy: ±2%
  • ± 3% AC – rectifier type (60 Hz sine wave)
  • Tracking: ± 1 1/2% DC
  • Repeatability: ± 0.5% DC and rectifier type
  • Dust-tight
  • Shielded cover
  • Stackable
  • Orientation: Horizontal, Vertical or specified mounting angle
  • Compact design provides the answer to “space” problems
  • They can stand alone or be stacked in space-saving clusters
  • UL models available

Yokogawa 2180 Series – Mini Switchboard Meters

New Old Stock

No longer manufactured by Yokogawa

Yokogawa stopped manufacturing panel meters in 2017. Limited stock is available at Electro-Meters.
Our panel meter specialists can customize these meters to fit your applications.

  • 3.5″ size
  • 250 degree scale deflection
  • LED illuminated versions available in Red, White
  • DC Meters accurate to within ±1% of full scale
  • AC Meters accurate to within ±1.5% of full scale
  • Tracking: ± 1 1/2% DC; ± 2% AC ; vertical mounting
  • Repeatability: ± 0.5% DC
  • Size: 3 1/4W” x 3 1/4L” x 4″ D
  • Shock-resistant pivot and jewel movement
  • UL and IP54 splash-proof models available
  • In accordance with ANSI C39.1
  • Optional LED Illumination

Yokogawa 240 Series – Elapsed Time Meters

New Old Stock

No longer manufactured by Yokogawa

Yokogawa stopped manufacturing panel meters in 2017. Limited stock is available at Electro-Meters.
Our panel meter specialists can customize these meters to fit your applications.

  • Reset or non-reset models available
  • Window mount models available
  • Units meet ANSI spec C39.1
  • Units meet UL file #E44857 and CSA
  • Conduit Cased NEMA4X and IP66
  • 6 digit counters read in hours, tenths of hours, minutes and tenths of minutes
  • Weather resistant
  • 2-1/2″ and 3-1/2″ Big Look models
  • 2-1/2″ and 3-1/2″ round and square models
  • Conduit case models available
  • Proven design
  • Accuracy: Matches frequency control of power system
  • Input: 120, 208, 240, 480 VAC at 50 or 60 Hz
  • Optional 3 stud mounting is available on 31⁄2″ meters
  • Complete interchangeability physically and electrically with most GE Types 235 and 236 models