Digital panel meters are versatile electronic devices used to measure and display various parameters in a wide range of industrial and commercial applications. These compact instruments provide accurate and real-time measurements of parameters such as voltage, current, temperature, pressure, flow rate, and more. With their clear and easy-to-read digital displays, they offer precise numerical readouts, eliminating the need for manual interpretation. Digital panel meters typically feature user-friendly interfaces, allowing users to customize settings and units of measurement. They offer high reliability, fast response times, and often incorporate additional features like alarms, data logging, and communication interfaces for data transfer and integration with other systems.

Showing 1–48 of 59 results

Texmate DI-602AE & DI-602AT5C Tiger Series – Programmable Meter Controllers

  • 96x48mm
  • 6 Digit x 2 Display Digital Controllers
  • Red, green, or superbright red 7-segment, 0.56” high LEDs with full support for seven segment alphanumeric text.
  • Range: -199999 to 999999
  • Modular construction
  • Front panel controls
  • Up to 4 “smart” input channels

Texmate DI-50E & DI-50T Tiger Series – Programmable Meter Controllers

  • 96x48mm
  • 5 Digit Display Controllers
  • Red, green, or superbright red 7-segment, 0.56” high LEDs with full support for seven segment alphanumeric text
  • Range: -19999 to 99999 counts
  • Modular construction
  • Front panel controls
  • Up to 4 “smart” input channels

Hsiang Cheng UME – DC Rate Meters

  • Wide input range selection
  • Process monitor & remote indication
  • Available in 4 ½ digits
  • High accuracy of 0.2% fs
  • Display with super rate LED

Texmate DX-35 Lynx Series – Modular Digital Meters

  • 96×48 mm
  • 3 1/2 Digit, Red, Green or Super Bright Red (optn).
  • 0.56″ or 0.8” high LEDs
  • Range: -1999 to 1999 counts.
  • Modular input cards
  • Versatile low cost indicator

Texmate DL-40JANUS Leopard Series – Digital Panel Meters

  • 96x48mm
  • 4 Digit LED display
  • Range: -1999 to 9999
  • Three-button programming from the front panel
  • Three front panel selectable ranges.
  • Four-level brightness control of digital display, and setpoint LEDs.
  • Three programmable setpoints.
  • Relay activation can be selected to occur above (HI) or below (LO) each setpoint.
  • Hysteresis setting for all three setpoints. Delay on make and delay on break for SP1 and SP2.
  • Peak and Valley. View and Reset.

Hsiang Cheng SMDA – DC Current Meter Relays

  • Multi-turn Potentiometer setting
  • Dual Hi & Lo setting
  • Wide input parameters & ranges
  • Output with adjustable time delayer
  • 4 digits up to 9999 counts

Hsiang Cheng SMDV – Voltage Meter Relays

  • Multi-turn Potentiometer setting
  • Dual Hi & Lo setting
  • Wide input parameters & ranges
  • Output with adjustable time delayer
  • 4 digits up to 9999 counts

Hsiang Cheng SME – DC Process Relay Meters

  • Multi-turn Potentiometer setting
  • Dual Hi & Lo setting
  • Wide input parameters & ranges
  • Output with adjustable time delayer
  • 4 digits up to 9999 counts

Hsiang Cheng SMT – Temperature Relay Meters

  • Multi-turn Potentiometer setting
  • Dual Hi & Lo setting
  • Wide input parameters & ranges
  • Output with adjustable time delay
  • 4 digits up to 9999 counts

Hsiang Cheng SMV – AC Voltage Meter Relays

  • Multi-turn Potentiometer setting
  • Dual Hi & Lo setting
  • Wide input parameters & ranges
  • Output with adjustable time delayer
  • 4 digits up to 9999 counts

Hsiang Cheng UMA – AC Current Meters

  • True Power System Design Complaints
  • ANSI-IEEE, IEC & VDE Standards
  • High over capability
  • Available 4 ½ digits
  • High Accuracy of 0.2% fs
  • Measurement of distorted waveform signals

Hsiang Cheng UMAF – Programmable Ratio AC Current Meters

  • True power system design complaints
  • ANSI-IEEE, IEC & VDE Standards
  • High over capability to assure reliable operation
  • Ratio programmable with field re-range ability
  • High Accuracy of 0.2% fs
  • 4 ½ digits, max of 19999 counts
  • Super rate display of 0.56”

Hsiang Cheng UMDV – DC Rate Meters

  • Wide input range selection
  • Process monitor & remote indication
  • Available in 4 ½ digits
  • High accuracy of 0.2% fs
  • Display with super rate LED

Hsiang Cheng UMEF – Programmable DC Ratio Meters

  • True Process DC rate monitor
  • Wide standard DC voltage & current input
  • Rangeable of display scale for engineering unit
  • High accuracy of 0.2%
  • Two wire application
  • 4-1/2 digits of maximum 19999 counts
  • Display with supper rate LED

Hsiang Cheng UMF – Power Frequency Meters

  • True power system design complaints
  • ANSI-IEEE, IEC & VDE Standards
  • High Accuracy of 0.2% fs
  • Display with super rate LED
  • Crystal base guarantees long term stability

Hsiang Cheng UMP – Power Factor Meters

  • True power system design complaints
  • ANSI-IEEE, IEC & VDE Standards
  • High Accuracy of 0.5%
  • Display with super rate LED

Hsiang Cheng UMV – AC Voltage Meters

  • True power system design complaints
  • ANSI-IEEE, IEC & VDE Standards
  • High over capability
  • Measurement of distorted waveform signals
  • High Accuracy 0.2% fs
  • Super rate display of 0.56”

Hsiang Cheng UMVF – Programmable Ratio AC Voltage Meters

  • True power system design complaints ANSI-IEEE, IEC & VDE standards
  • High over capability to assure reliable operation
  • Ratio programmable with field re-range ability
  • High accuracy of 0.2% fs
  • 4-1/2 digits maximum of 19999 counts
  • Super rate display of 0.56″

Hsiang Cheng UTF – Universal Temperature Meters

  • Universal temperature signal inputs: T/C – J, K, E, T, N, R, S, B and Pt100 RTD
  • Accuracy: 0.1% fs ± 0.5℃ (TC / J K E T N )
  • Wide Auxiliary power range AC/DC 30-250V
  • User friendly & easily configured

Jewell Instruments 1000 Series – Digital Panel Meters

  • Ideal for line monitoring
  • Isolated DC powered for monitoring multiple choices
  • Value priced
  • 3 1/2 digit readout, full scale 1999 display

Jewell Instruments 2000 Series – Digital Panel Meters

  • 4 digit readout, full scale 1999 display
  • 1/2″ high digits on a high contrast LCD
  • Auto-polarity (-) displayed
  • Splash and hose proof meeting NEMA 4, NEMA 12, and IPC 55 standards

Jewell Instruments BL Series – Digital Panel Meters

  • Ideal for line monitoring
  • Value priced
  • Low power consumption
  • Input signal can be used to power meters
  • 3 1/2 digit readout, full scale 1999 display
  • 1/2″ high digits on a high contrast LCD
  • Auto-polarity (-) displayed
  • User selectable decimal points
  • Choice of ±200mV, ±2V, 20V, ±200V, 5 , 50 AAC, Thermocouple, RTD or Frequency
  • Choice of 10. 15, 20, , 32 VDC or 115VAC and 240VAC power options

Jewell Instruments DW Series – Digital Panel Meters

  • Easy to read with large display and wide viewing angles
  • No additional wires makes installation faster and easier
  • Automatic polarity indication
  • Custom nomenclature optional

Sifam Tinsley Alpha 20 – Multifunction Power Meter

  • Measures important electrical parameters in 3 phase 4 Wire and 3 phase 3 Wire Networks
  • True RMS measurement – measures distorted waveform up to 15th harmonic
  • Limit Switch control (optional)
  • 3 Line 4 Digits ultra bright LED Display (up to 9999)
  • On site Programmable CT/PT Ratios
  • User selectable CT Secondary 1A/5A
  • User selectable PT Secondary from 100 VLL to 500 VLL
  • Storage of MIN / MAX values

Sifam Tinsley Alpha 30 – Multifunction Power Meter

  • Measures important electrical parameters in 3 phase 4 Wire and 3 phase 3 Wire Networks
  • MODBUS (RS-485) Communication (optional)
  • Pulse/Limit Switch output (optional)
  • 3 Line 4 Digits ultra bright LED Display (up to 9999)
  • On-site Programmable CT/PT Ratios
  • User selectable CT Secondary 1A/5A
  • Measurement & Display of RPM, Run hours, On hours, No. of interruption

Texmate BL-40 Leopard Series – Digital Relay Meters

  • 96x24mm
  • 4 Digit Display
  • Range: -1999 to 9999
  • Three-button programming from the front panel
  • Three front panel selectable ranges
  • Four-level brightness control of digital display, and setpoint LEDs
  • Three programmable setpoints
  • Relay activation can be selected to occur above (HI) or below (LO) each setpoint
  • Hysteresis setting for all three setpoints. Delay on make and delay on break for SP1 and SP2
  • Peak and Valley. View and Reset
  • Auto-sensing AC/DC Power Supply. For Voltages Between 85-265VAC/95-300VAC (PS1) or 15-48VAC/10-72VDC
  • One 9 amp form C and one 4 amp form A relay, or up to three 4 amp form A relays are available

Texmate BL-B51D40 Leopard Series – Bargraph Meters

  • 96x24mm
  • Range: -1999 to 9999
  • 4 Digit LED display
  • 51 segment bargraph
  • Bargraph center zero function.
  • Four programmable setpoints.
  • Setpoint 1 has delay-on-make and delay-on-break plus a special “pump on pump off” mode that creates a Hysteresis Band between SP1 and SP2.
  • Relay activation can selected to occur above or below (Lo) each setpoint.
  • Digital display blanking.
  • Decimal point setting.
  • Four-level brightness control of the bargraph digital display.

Texmate BN Series – Compact Digital Meter

  • 96x24mm
  • 3 1/2 or 4 1/2 Digit display
  • Slim case
  • Pin for pin functional replacement for the Newport model 215
  • Short depth case – just 2.83 inches (72mm) behind the panel.
  • Four user-selectable ranges of 200mV, 2V, 20V and 200V

Texmate BX-35 Lynx Series – Modular Digital Meters

  • 96×24 mm
  • 3 1/2 Digit , 0.56”Red, Green or Super Bright Red (optn).
  • Range: -1999 to 1999 counts.
  • Modular input cards
  • Versatile low cost indicator

Texmate BX-45 Lynx Series – Modular Digital Meters

  • 96×24 mm
  • 4 1/2 Digit , 0.56”Red, Green or Super Bright Red (optn).
  • Range: -19999 to 19999 counts.
  • Modular input cards
  • 16 bit dual slope
  • Versatile low cost indicator

Texmate BX-B31 Lynx Series – Bargraph Meter

  • 96x24mm
  • 31 segment AC/DC powered modular compact bargraph.
  • Red (std), green (optional) or amber (optional) colors.
  • 1 or 2 setpoints
  • 1 or 2 relays
  • Vertical or horizontal formats.

Texmate CM Series – Slim Bezel Loop Powered Meters

  • 69.68×29.72mm
  • Loop-powered Panel Meter
  • 3 1/2 Digit 0.48″ LCD
  • Slim Bezel Case
  • 4-20 mA Process Meter

Texmate DI-503E & DI-503T Tiger Series – Programmable Meter Controller

  • 96x48mm
  • 5 Digit x3 Display Controllers
  • 3 displays with red, green, or superbright red 7-segment, 0.31” high LEDs
  • Range: -19999 to 99999 counts
  • Modular construction
  • Front panel controls
  • Up to 4 “smart” input channels

Texmate DI-50EAN6 & DI-50TAN6 Tiger Series – Programmable Meter Controllers

  • 96x48mm
  • 5 Digit Display Controllers
  • Red, green, or super-bright red 7-segment, 0.31” high LEDs with full support for seven segment alphanumeric text.
  • Range: -19999 to 99999 counts
  • 6 light bar annunciators to illuminate application specific text.
  • Modular construction
  • Front panel controls

Texmate DI-50EB51 & DI-50TB51 Tiger Series – Programmable Meter Controllers

  • 96x48mm
  • 5-digit Display Controllers
  • Red or green 7-segment, 0.31” high LEDs with full support for seven segment alphanumeric text.
  • Range: -19999 to 99999 counts
  • 6 LED setpoint annunciators
  • 51 segment bargraph
  • Modular construction

Texmate DI-60AE & DI-60AT5C Tiger Series – Programmable Meter Controllers

  • 96x48mm
  • 6-Digit Alphanumeric Display Controllers
  • Red, green, or superbright red 7-segment, 0.56” high LEDs with full support for seven segment alphanumeric text.
  • Range: -199999 to 999999
  • Modular construction
  • Front panel controls
  • Up to 4 “smart” input channels

Texmate DI-60XE & DI-60XT Tiger Series – Programmable Meter Controllers

  • 96x48mm
  • 6-Digit LCD Controllers
  • 7-segment, 0.56” high LCD with full support for seven segment alphanumeric text.
  • Range: -199999 to 999999
  • Modular construction
  • Front panel controls
  • Up to 4 “smart” input channels

Texmate DI-802XAE & DI-802XAT Tiger Series – Programmable Meter Controllers

  • 96x48mm
  • 8-Digit LCD Controllers x 2 5.5mm Displays
  • Modular construction
  • Range: -9999999 to 99999999
  • Front panel controls
  • Up to 4 “smart” input channels

Texmate DL-40RPM Leopard Series – Speed Measuring Digital Panel Meters

  • 96x48mm
  • 4 Digit LED display
  • Three-button programming from the front panel
    (UP, DOWN and PROGRAM buttons).
  • Three front panel selectable ranges.
  • Front panel selectable four-level brightness control of digital display, and setpoint LEDs.
  • Four programmable setpoints.
  • Relay activation can be selected to occur above (HI) or below (LO) each setpoint.
  • Hysteresis setting for all three setpoints. Delay on make and delay on break for SP1 and SP2.
  • Peak and Valley. View and Reset.
  • Optional plug-in relay or SSR Output Modules

Texmate DX-40 Lynx Series – Modular Digital Meters

  • 96X48 mm
  • 4 Digit, Red, Green or Super Bright Red (optn).
  • 0.8” high LEDs
  • Range: -9999 to 9999
  • Modular input cards
  • Versatile low cost indicator

Texmate DX-45 Lynx Series – Modular Digital Meters

  • 96×48 mm
  • 4 1/2 Digit, Red, Green or Super Bright Red (optn).
  • 0.56” high LEDs
  • Range: -19999 to 19999
  • Modular input cards
  • Versatile low cost indicator

Texmate FI-B101D50E & FI-B101D50T Tiger Series – Programmable Meter Controllers

  • 144x36mm
  • 7-segment, 8mm high LEDs with full support for alphanumeric text
  • 101 segment red, green or tricolor bargraph can display signal from any four channels or the result of a processed input signal
  • 6 LED annunciators
  • Range: -19999 to 99999

Texmate FL-B101D40 Leopard Series – Bargraph Meters

  • 144x36mm
  • 101 Segments
  • 4 Digit 0.32″ LEDs
  • Range: -1999 to 9999
  • The bargraph can display, full scale, any desired portion of the digital reading.
  • Bargraph center zero function.
  • Four programmable setpoints with adjustable Hysteresis.
  • Setpoint 1 has delay-on-make and delay-on-break plus a special “pump on pump off” mode that creates a Software Features Hysteresis Band between SP1 and SP2.
  • Relay activation can be selected to occur above (hi) or below (Lo) each setpoint.
  • Digital display blanking.
  • Decimal point setting.
  • Four-level brightness control accessed by the button and adjusted by the button.

Texmate FL-B101Q Leopard Series – Bargraph Meters

  • 144×36 mm
  • 101 segment bargraph
  • Bargraph center zero function.
  • Four programmable setpoints.
  • Relays activation can be selected to occur above (HI) or below (LO) each setpoint.
  • Decimal point setting.

Texmate FL-B202Q Leopard Series – Bargraph Meters

  • 144×36 mm
  • The two 101 segment bargraph can be independently scaled.
  • Bargraph center zero function.
  • Four programmable setpoints.
  • Relays activation can be selected to occur above (HI) or below (LO) each setpoint.
  • Decimal point setting.

Texmate FX-B101Q Lynx Series – Bargraph Meters

  • 96 x 144mm
  • 101 segment AC/DC powered bargraph.
  • Red (std), green (optional) or amber (optional) colors.
  • Accepts modular input cards
  • 2 Analog outputs
  • Vertical or horizontal formats.

Texmate GI-50E & GI-50T Tiger Series – Programmable Meter Controllers

  • 144x72mm
  • 5-Digit Controllers
  • Red, green, or superbright red 7-segment, 1” high LEDs
  • Range: -19999 to 99999
  • Modular construction
  • Front panel controls
  • Up to 4 “smart” input channels

Texmate GI-50EB101 & GI-50TB101 Tiger Series – Programmable Meter Controllers

  • 144x72mm
  • 5 Digit Controllers
  • 101 segment bargraph
  • Red, green, or superbright red 7-segment, 0.56” high LEDs with full support for seven segment alphanumeric text.
  • Range: -19999 to 99999
  • Modular construction
  • Front panel controls
  • Up to 4 “smart” input channels