Digital panel meters are versatile electronic devices used to measure and display various parameters in a wide range of industrial and commercial applications. These compact instruments provide accurate and real-time measurements of parameters such as voltage, current, temperature, pressure, flow rate, and more. With their clear and easy-to-read digital displays, they offer precise numerical readouts, eliminating the need for manual interpretation. Digital panel meters typically feature user-friendly interfaces, allowing users to customize settings and units of measurement. They offer high reliability, fast response times, and often incorporate additional features like alarms, data logging, and communication interfaces for data transfer and integration with other systems.

Showing 1–24 of 59 results

Texmate DI-602AE & DI-602AT5C Tiger Series – Programmable Meter Controllers

  • 96x48mm
  • 6 Digit x 2 Display Digital Controllers
  • Red, green, or superbright red 7-segment, 0.56” high LEDs with full support for seven segment alphanumeric text.
  • Range: -199999 to 999999
  • Modular construction
  • Front panel controls
  • Up to 4 “smart” input channels

Texmate DI-50E & DI-50T Tiger Series – Programmable Meter Controllers

  • 96x48mm
  • 5 Digit Display Controllers
  • Red, green, or superbright red 7-segment, 0.56” high LEDs with full support for seven segment alphanumeric text
  • Range: -19999 to 99999 counts
  • Modular construction
  • Front panel controls
  • Up to 4 “smart” input channels

Hsiang Cheng UME – DC Rate Meters

  • Wide input range selection
  • Process monitor & remote indication
  • Available in 4 ½ digits
  • High accuracy of 0.2% fs
  • Display with super rate LED

Texmate DX-35 Lynx Series – Modular Digital Meters

  • 96×48 mm
  • 3 1/2 Digit, Red, Green or Super Bright Red (optn).
  • 0.56″ or 0.8” high LEDs
  • Range: -1999 to 1999 counts.
  • Modular input cards
  • Versatile low cost indicator

Texmate DL-40JANUS Leopard Series – Digital Panel Meters

  • 96x48mm
  • 4 Digit LED display
  • Range: -1999 to 9999
  • Three-button programming from the front panel
  • Three front panel selectable ranges.
  • Four-level brightness control of digital display, and setpoint LEDs.
  • Three programmable setpoints.
  • Relay activation can be selected to occur above (HI) or below (LO) each setpoint.
  • Hysteresis setting for all three setpoints. Delay on make and delay on break for SP1 and SP2.
  • Peak and Valley. View and Reset.

Hsiang Cheng SMDA – DC Current Meter Relays

  • Multi-turn Potentiometer setting
  • Dual Hi & Lo setting
  • Wide input parameters & ranges
  • Output with adjustable time delayer
  • 4 digits up to 9999 counts

Hsiang Cheng SMDV – Voltage Meter Relays

  • Multi-turn Potentiometer setting
  • Dual Hi & Lo setting
  • Wide input parameters & ranges
  • Output with adjustable time delayer
  • 4 digits up to 9999 counts

Hsiang Cheng SME – DC Process Relay Meters

  • Multi-turn Potentiometer setting
  • Dual Hi & Lo setting
  • Wide input parameters & ranges
  • Output with adjustable time delayer
  • 4 digits up to 9999 counts

Hsiang Cheng SMT – Temperature Relay Meters

  • Multi-turn Potentiometer setting
  • Dual Hi & Lo setting
  • Wide input parameters & ranges
  • Output with adjustable time delay
  • 4 digits up to 9999 counts

Hsiang Cheng SMV – AC Voltage Meter Relays

  • Multi-turn Potentiometer setting
  • Dual Hi & Lo setting
  • Wide input parameters & ranges
  • Output with adjustable time delayer
  • 4 digits up to 9999 counts

Hsiang Cheng UMA – AC Current Meters

  • True Power System Design Complaints
  • ANSI-IEEE, IEC & VDE Standards
  • High over capability
  • Available 4 ½ digits
  • High Accuracy of 0.2% fs
  • Measurement of distorted waveform signals

Hsiang Cheng UMAF – Programmable Ratio AC Current Meters

  • True power system design complaints
  • ANSI-IEEE, IEC & VDE Standards
  • High over capability to assure reliable operation
  • Ratio programmable with field re-range ability
  • High Accuracy of 0.2% fs
  • 4 ½ digits, max of 19999 counts
  • Super rate display of 0.56”

Hsiang Cheng UMDV – DC Rate Meters

  • Wide input range selection
  • Process monitor & remote indication
  • Available in 4 ½ digits
  • High accuracy of 0.2% fs
  • Display with super rate LED

Hsiang Cheng UMEF – Programmable DC Ratio Meters

  • True Process DC rate monitor
  • Wide standard DC voltage & current input
  • Rangeable of display scale for engineering unit
  • High accuracy of 0.2%
  • Two wire application
  • 4-1/2 digits of maximum 19999 counts
  • Display with supper rate LED

Hsiang Cheng UMF – Power Frequency Meters

  • True power system design complaints
  • ANSI-IEEE, IEC & VDE Standards
  • High Accuracy of 0.2% fs
  • Display with super rate LED
  • Crystal base guarantees long term stability

Hsiang Cheng UMP – Power Factor Meters

  • True power system design complaints
  • ANSI-IEEE, IEC & VDE Standards
  • High Accuracy of 0.5%
  • Display with super rate LED

Hsiang Cheng UMV – AC Voltage Meters

  • True power system design complaints
  • ANSI-IEEE, IEC & VDE Standards
  • High over capability
  • Measurement of distorted waveform signals
  • High Accuracy 0.2% fs
  • Super rate display of 0.56”

Hsiang Cheng UMVF – Programmable Ratio AC Voltage Meters

  • True power system design complaints ANSI-IEEE, IEC & VDE standards
  • High over capability to assure reliable operation
  • Ratio programmable with field re-range ability
  • High accuracy of 0.2% fs
  • 4-1/2 digits maximum of 19999 counts
  • Super rate display of 0.56″

Hsiang Cheng UTF – Universal Temperature Meters

  • Universal temperature signal inputs: T/C – J, K, E, T, N, R, S, B and Pt100 RTD
  • Accuracy: 0.1% fs ± 0.5℃ (TC / J K E T N )
  • Wide Auxiliary power range AC/DC 30-250V
  • User friendly & easily configured

Jewell Instruments 1000 Series – Digital Panel Meters

  • Ideal for line monitoring
  • Isolated DC powered for monitoring multiple choices
  • Value priced
  • 3 1/2 digit readout, full scale 1999 display

Jewell Instruments 2000 Series – Digital Panel Meters

  • 4 digit readout, full scale 1999 display
  • 1/2″ high digits on a high contrast LCD
  • Auto-polarity (-) displayed
  • Splash and hose proof meeting NEMA 4, NEMA 12, and IPC 55 standards

Jewell Instruments BL Series – Digital Panel Meters

  • Ideal for line monitoring
  • Value priced
  • Low power consumption
  • Input signal can be used to power meters
  • 3 1/2 digit readout, full scale 1999 display
  • 1/2″ high digits on a high contrast LCD
  • Auto-polarity (-) displayed
  • User selectable decimal points
  • Choice of ±200mV, ±2V, 20V, ±200V, 5 , 50 AAC, Thermocouple, RTD or Frequency
  • Choice of 10. 15, 20, , 32 VDC or 115VAC and 240VAC power options

Jewell Instruments DW Series – Digital Panel Meters

  • Easy to read with large display and wide viewing angles
  • No additional wires makes installation faster and easier
  • Automatic polarity indication
  • Custom nomenclature optional

Sifam Tinsley Alpha 20 – Multifunction Power Meter

  • Measures important electrical parameters in 3 phase 4 Wire and 3 phase 3 Wire Networks
  • True RMS measurement – measures distorted waveform up to 15th harmonic
  • Limit Switch control (optional)
  • 3 Line 4 Digits ultra bright LED Display (up to 9999)
  • On site Programmable CT/PT Ratios
  • User selectable CT Secondary 1A/5A
  • User selectable PT Secondary from 100 VLL to 500 VLL
  • Storage of MIN / MAX values