The AQ2200-642 reduces the complexity and cost of 10G optical transceiver testing by combining bus and power control features into the same mainframe that performs Signal Generation, BERT and Optical testing. This allows a single programming interface to control all aspects of the transceiver test, simplifying test setup, decreasing test time and increasing productivity. The wiring complexity and test bench size are reduced by replacing separate Digital Multi-Meters, Programmable Power supplies and Serial I/F controllers with a single module.

Learn More

The post Yokogawa AQ2200-642 – Transceiver I/F Module appeared first on Electro-Meters.

The AQ2200-421 OSW module features two optical switches with low insertion loss and superior switching reproducibility, in a one-slot size module, and allows selection of 1 x 2 or 2 x 2 port configuration according to the application. Moreover, the optical fiber type can also be selected between SMF (core diameter of 10 µm) and MMF (core diameter of 62.5 µm), allowing a wide range of measuring systems to be built corresponding to the systems or devices used in optical public networks or optical LANs.

Learn More

The post Yokogawa AQ2200-421 – Optical Switch Module appeared first on Electro-Meters.

The AQ2200-412 OSW module is a space-saving 1 x 16 optical switch featuring low insertion loss and superior switching reproducibility, in a two-slot size module. This module allows to connect up to 16 DUT and improve testing efficiency in automatic test system.

Learn More

The post Yokogawa AQ2200-412 – Optical Switch Module appeared first on Electro-Meters.

The AQ2200-411 OSW module is a space-saving optical switch featuring low insertion loss and superior switching reproducibility, and allows selection of 1 x 4 or 1 x 8 port configuration according to the application.

Moreover, the optical fiber type can also be selected between SMF (core diameter of 10 µm) and MMF (core diameter of 62.5 µm), allowing a wide range of measuring systems to be built corresponding to the systems or devices used in optical public networks or optical LANs.

Learn More

The post Yokogawa AQ2200-411 – Optical Switch Module appeared first on Electro-Meters.

The compact AQ2200-332 ATTN module features an optical variable attenuator and an optical power meter monitoring the output power of the optical variable attenuator. The optical monitoring function allows an optical output of any absolute value to be set up from this module.

Moreover, the optical fiber type can also be selected between SMF(10/125 µm) and MMF(50/125 µm, 62.5/125 µm), allowing a wide range of measuring systems to be built for systems or devices in optical public networks or optical LANs.

Learn More

The post Yokogawa AQ2200-332 – Optical Attenuator Module appeared first on Electro-Meters.

The AQ2200-312 ATTN module is a variable optical attenuator capable of adjusting optical output with high precision over the wavelength range of 1200 nm to 1700 nm (SM version). The ATTN module’s output can be varied in steps of 0.001 dB over a wide attenuation range of 0 to 60 dB (SM version). In addition, this attenuator provides the low insertion loss, low polarization dependence, and high return loss needed in a variable optical attenuator for optical system test. With the optional monitor output connected to a sensor module, it is possible to create programs to precisely control the optical output power.

Multi-mode version is also available.

Learn More

The post Yokogawa AQ2200-312 – Optical Attenuator Module appeared first on Electro-Meters.

The AQ2200-215 is an optical power meter designed specifically to measure high optical power up to +30dBm. It features high speed sampling and advanced data processing functions. The AQ2200-215 is an ideal measurement tool for optical output power measurement and margin test of WDM transmission equipment, as well as gain measurements of optical fiber amplifiers. It is commonly used in conjunction with other AQ2200 Series modules and the AQ6370C Optical Spectrum Analyzer to offer a flexible customized optical measurement system.

Learn More

The post Yokogawa AQ2200-215 – High Power Sensor Modules appeared first on Electro-Meters.

The AQ2200-222 is a high-performance yet compact module equipped with two sensors. The module offers high-speed sampling, low polarization dependency, and rich data processing capabilities for improved measurement throughput and low-cost multi-port measurement. With two high-performance sensors in one slot, this Optical Power Meter Sensor Module is ideal for space-saving, multi-port measurements.

Learn More

The post Yokogawa AQ2200-222 – Dual Sensor Modules appeared first on Electro-Meters.

The AQ2200-131 and AQ2200-132 are single and dual channel tunable light source modules for mounting into the AQ2200 series multi application test system. The output wavelength can be conveniently set to the predefined DWDM grid channels.

• Tunable to one of 100 G, 50 G, or 25 GHz grids
• Wide line width: 3 MHz
• Ideal for optical fiber amplifier measurement system

• Tunable to arbitrary grid frequency with min. 100 MHz steps
• Fine-tuning capability with min. 1 MHz steps (at grid setting mode)
• Narrow-line width: 100 KHz
• SBS suppression

Learn More

The post Yokogawa AQ2200-131/132 – Grid Light Source Modules appeared first on Electro-Meters.

The AQ2211 and AQ2212 frame controllers are platforms for the AQ2200 Multi Application Test System. These frame controllers contain a variety of measurement applications that enable you to get the information you need without connecting an external controller PC. In addition, they have three different external interfaces, so you can always use the best interface for a particular measurement application.

Learn More

The post Yokogawa AQ2212 – 9 Slot Frame Controller appeared first on Electro-Meters.